[PATCH 1/5] ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support

[Gary Bisson]

Hi Shawn,

On Tue, Nov 1, 2016 at 3:13 PM, Shawn Guo <shawnguo at kernel.org> wrote:
> On Tue, Oct 25, 2016 at 11:19:51PM +0200, Gary Bisson wrote:
>> SoM based on i.MX6 Quad with 1GB of DDR3.
>>
>> https://boundarydevices.com/product/nit6x-som-v2/
>>
>> Signed-off-by: Gary Bisson <gary.bisson at boundarydevices.com>
>> ---
>>  arch/arm/boot/dts/Makefile                    |   1 +
>>  arch/arm/boot/dts/imx6q-nitrogen6_som2.dts    |  53 ++
>>  arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 770 ++++++++++++++++++++++++++
>>  3 files changed, 824 insertions(+)
>>  create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
>>  create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
>
> <snip>
>
>> +/ {
>> +     chosen {
>> +             stdout-path = &uart2;
>> +     };
>> +
>> +     memory {
>> +             reg = <0x10000000 0x40000000>;
>> +     };
>> +
>> +     backlight_lcd: backlight_lcd {
>
> Please use hyphen instead of underscore in node name.  Please check
> through the patch series.

Sorry about that, forgot (again). Just to make sure, the label can
have underscore but not the name right? Or is it better to have hypens
everywhere?

So I guess I need to make a pass on current boards as well. Some
patches in my series rename the panel to panel_lvdsX to match the
current Nitrogen6_MAX naming[1] but this would need to be changed to
panel-lvdsX as well.

Regards,
Gary

[1] http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi#n296