[linux-sunxi] Re: [PATCH] ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board

[Maxime Ripard]

On Mon, May 30, 2016 at 10:26:21PM +0200, Bernhard Nortmann wrote:
> Am 30.05.2016 um 21:43 schrieb Maxime Ripard:
> >Hi,
> >
> >On Mon, May 30, 2016 at 08:30:13PM +0800, luoyi.ly at gmail.com wrote:
> >>From: luoyi <luoyi.ly at gmail.com>
> >>
> >>Add support for the Bananapi M1 Plus A20 development board from sinovoip.com.cn .
> >>This board features 1G RAM, 2 USB A receptacles, 1 micro USB receptacle for
> >>OTG, 1 micro USB receptacle for power, HDMI, sata, Gbit ethernet, ir receiver,
> >>3.5 mm jack for stero sound out, on board microphone, 40 gpio pins and sdio wifi.
> >What is the difference between the M1+ and the M1?
> 
> The M1+ is an updated version of the original Banana Pi. If you're
> interested in the details, have a look at
> http://linux-sunxi.org/Banana_Pi#Variants .  "BPi-M1+" is SinoVoip's
> counterpart of LeMaker's "Banana Pro", for which a .dts already
> exists. Judging from .fex files, only a single pin assignment seems
> to differ between the two (audio_pa_ctrl, PH26 vs. PH15).

Gee, that's confusing :)

I guess we should just include the banana pro DTB and change that pin
(and the i2s pins Luo was mentionning).

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160531/eba0f737/attachment.sig>