[PATCH 1/3] watchdog: Add Meson GXBB Watchdog Driver
Guenter Roeck
linux at roeck-us.net
Mon May 30 09:50:34 PDT 2016
On 05/30/2016 06:29 AM, Neil Armstrong wrote:
> Add watchdog specific driver for Amlogic Meson GXBB SoC.
>
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> ---
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/meson_gxbb_wdt.c | 277 ++++++++++++++++++++++++++++++++++++++
> 2 files changed, 278 insertions(+)
> create mode 100644 drivers/watchdog/meson_gxbb_wdt.c
>
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 9bde095..7679d93 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -68,6 +68,7 @@ obj-$(CONFIG_QCOM_WDT) += qcom-wdt.o
> obj-$(CONFIG_BCM_KONA_WDT) += bcm_kona_wdt.o
> obj-$(CONFIG_TEGRA_WATCHDOG) += tegra_wdt.o
> obj-$(CONFIG_MESON_WATCHDOG) += meson_wdt.o
> +obj-$(CONFIG_MESON_WATCHDOG) += meson_gxbb_wdt.o
I would really prefer a separate configuration option.
> obj-$(CONFIG_MEDIATEK_WATCHDOG) += mtk_wdt.o
> obj-$(CONFIG_DIGICOLOR_WATCHDOG) += digicolor_wdt.o
> obj-$(CONFIG_LPC18XX_WATCHDOG) += lpc18xx_wdt.o
> diff --git a/drivers/watchdog/meson_gxbb_wdt.c b/drivers/watchdog/meson_gxbb_wdt.c
> new file mode 100644
> index 0000000..9619c5e
> --- /dev/null
> +++ b/drivers/watchdog/meson_gxbb_wdt.c
> @@ -0,0 +1,277 @@
> +/*
> + * This file is provided under a dual BSD/GPLv2 license. When using or
> + * redistributing this file, you may do so under either license.
> + *
> + * GPL LICENSE SUMMARY
> + *
> + * Copyright (c) 2016 BayLibre, SAS.
> + * Author: Neil Armstrong <narmstrong at baylibre.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of version 2 of the GNU General Public License as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, see <http://www.gnu.org/licenses/>.
> + * The full GNU General Public License is included in this distribution
> + * in the file called COPYING.
> + *
> + * BSD LICENSE
> + *
> + * Copyright (c) 2016 BayLibre, SAS.
> + * Author: Neil Armstrong <narmstrong at baylibre.com>
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of Intel Corporation nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/clk.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/types.h>
> +#include <linux/watchdog.h>
Please order include files alphabetically; that simplifies later changes
and helps finding duplicates.
> +
> +#define DEFAULT_TIMEOUT 10 /* seconds */
> +
Sure you want the default timeout to be that low ?
> +#define GXBB_WDT_CTRL_REG 0x0
> +#define GXBB_WDT_CTRL1_REG 0x4
> +#define GXBB_WDT_TCNT_REG 0x8
> +#define GXBB_WDT_RSET_REG 0xc
> +
> +#define GXBB_WDT_CTRL_EE_RESET_NOW BIT(26)
> +
> +#define GXBB_WDT_CTRL_CLKDIV_EN BIT(25)
> +#define GXBB_WDT_CTRL_CLK_EN BIT(24)
> +#define GXBB_WDT_CTRL_IRQ_EN BIT(23)
> +#define GXBB_WDT_CTRL_EE_RESET BIT(21)
> +#define GXBB_WDT_CTRL_XTAL_SEL (0)
> +#define GXBB_WDT_CTRL_CLK81_SEL BIT(19)
> +#define GXBB_WDT_CTRL_EN BIT(18)
> +#define GXBB_WDT_CTRL_DIV_MASK (BIT(18) - 1)
> +
> +#define GXBB_WDT_CTRL1_GPIO_PULSE BIT(17)
> +#define GXBB_WDT_CTRL1_GPIO_POL_RESET_0 BIT(16)
> +#define GXBB_WDT_CTRL1_GPIO_POL_RESET_1 (0)
> +#define GXBB_WDT_CTRL1_GPIO_PULSE_CNT (BIT(16) - 1)
> +
> +#define GXBB_WDT_TCNT_SETUP_MASK (BIT(16) - 1)
> +#define GXBB_WDT_TCNT_CNT_SHIFT 16
> +
> +struct meson_gxbb_wdt {
> + void __iomem *reg_base;
> + struct watchdog_device wdt_dev;
> + struct clk *clk;
> +};
> +
> +static int meson_gxbb_wdt_start(struct watchdog_device *wdt_dev)
> +{
> + struct meson_gxbb_wdt *data = watchdog_get_drvdata(wdt_dev);
> +
> + writel(readl(data->reg_base + GXBB_WDT_CTRL_REG) | GXBB_WDT_CTRL_EN,
> + data->reg_base + GXBB_WDT_CTRL_REG);
> +
> + return 0;
> +}
> +
> +static int meson_gxbb_wdt_stop(struct watchdog_device *wdt_dev)
> +{
> + struct meson_gxbb_wdt *data = watchdog_get_drvdata(wdt_dev);
> +
> + writel(readl(data->reg_base + GXBB_WDT_CTRL_REG) & ~GXBB_WDT_CTRL_EN,
> + data->reg_base + GXBB_WDT_CTRL_REG);
Please align continuation lines with '('.
> +
> + return 0;
> +}
> +
> +static int meson_gxbb_wdt_ping(struct watchdog_device *wdt_dev)
> +{
> + struct meson_gxbb_wdt *data = watchdog_get_drvdata(wdt_dev);
> +
> + writel(0, data->reg_base + GXBB_WDT_RSET_REG);
> +
> + return 0;
> +}
> +
> +static int meson_gxbb_wdt_get_timeout(struct meson_gxbb_wdt *data)
> +{
> + return (readl(data->reg_base + GXBB_WDT_TCNT_REG) &
> + GXBB_WDT_TCNT_SETUP_MASK) / 1000;
> +}
> +
Unused function ?
> +static int meson_gxbb_wdt_set_timeout(struct watchdog_device *wdt_dev,
> + unsigned int timeout)
> +{
> + struct meson_gxbb_wdt *data = watchdog_get_drvdata(wdt_dev);
> +
> + meson_gxbb_wdt_ping(wdt_dev);
Is this necessary ? The infrastructure calls it after calling this function.
> +
> + writel(timeout * 1000, data->reg_base + GXBB_WDT_TCNT_REG);
wdt_dev->timeout = timeout;
Also, timeout may be larger than the maximum supported by the hardware,
so you need to ensure that the value your write is not larger than
GXBB_WDT_TCNT_SETUP_MASK.
> +
> + return 0;
> +}
> +
> +static unsigned int meson_gxbb_wdt_get_timeleft(struct watchdog_device *wdt_dev)
> +{
> + struct meson_gxbb_wdt *data = watchdog_get_drvdata(wdt_dev);
> + unsigned long reg;
> +
> + reg = readl(data->reg_base + GXBB_WDT_TCNT_REG);
> +
> + return ((reg >> GXBB_WDT_TCNT_CNT_SHIFT)-
Space between operators, please.
> + (reg & GXBB_WDT_TCNT_SETUP_MASK)) / 1000;
> +}
> +
> +static const struct watchdog_ops meson_gxbb_wdt_ops = {
> + .start = meson_gxbb_wdt_start,
> + .stop = meson_gxbb_wdt_stop,
> + .ping = meson_gxbb_wdt_ping,
> + .set_timeout = meson_gxbb_wdt_set_timeout,
> + .get_timeleft = meson_gxbb_wdt_get_timeleft,
> +};
> +
> +static const struct watchdog_info meson_gxbb_wdt_info = {
> + .identity = "meson-gxbb-wdt",
It is common here to provide a user readable string, which would be something
like "Meson GXBB Watchdog".
> + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
> +};
> +
> +static int __maybe_unused meson_gxbb_wdt_resume(struct device *dev)
> +{
> + struct meson_gxbb_wdt *data = dev_get_drvdata(dev);
> +
> + if (watchdog_active(&data->wdt_dev))
> + meson_gxbb_wdt_start(&data->wdt_dev);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused meson_gxbb_wdt_suspend(struct device *dev)
> +{
> + struct meson_gxbb_wdt *data = dev_get_drvdata(dev);
> +
> + if (watchdog_active(&data->wdt_dev))
> + meson_gxbb_wdt_stop(&data->wdt_dev);
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops meson_gxbb_wdt_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(meson_gxbb_wdt_suspend, meson_gxbb_wdt_resume)
> +};
> +
> +static const struct of_device_id meson_gxbb_wdt_dt_ids[] = {
> + { .compatible = "amlogic,meson-gxbb-wdt", },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, meson_gxbb_wdt_dt_ids);
> +
> +static int meson_gxbb_wdt_probe(struct platform_device *pdev)
> +{
> + struct meson_gxbb_wdt *data;
> + struct resource *res;
> + int ret;
> +
> + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + data->reg_base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(data->reg_base))
> + return PTR_ERR(data->reg_base);
> +
> + data->clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(data->clk))
> + return PTR_ERR(data->clk);
> +
> + clk_prepare_enable(data->clk);
> +
> + platform_set_drvdata(pdev, data);
> +
> + data->wdt_dev.parent = &pdev->dev;
> + data->wdt_dev.info = &meson_gxbb_wdt_info;
> + data->wdt_dev.ops = &meson_gxbb_wdt_ops;
> + data->wdt_dev.max_hw_heartbeat_ms = GXBB_WDT_TCNT_SETUP_MASK;
> + data->wdt_dev.min_timeout = 1;
> + data->wdt_dev.timeout = DEFAULT_TIMEOUT;
> + watchdog_set_drvdata(&data->wdt_dev, data);
> +
> + /* Setup with 1ms timebase */
> + writel(((clk_get_rate(data->clk) / 1000) & GXBB_WDT_CTRL_DIV_MASK) |
> + GXBB_WDT_CTRL_EE_RESET |
> + GXBB_WDT_CTRL_CLK_EN |
> + GXBB_WDT_CTRL_CLKDIV_EN,
> + data->reg_base + GXBB_WDT_CTRL_REG);
> +
> + meson_gxbb_wdt_set_timeout(&data->wdt_dev, data->wdt_dev.timeout);
> +
> + ret = watchdog_register_device(&data->wdt_dev);
> + if (ret)
> + return ret;
clk_disable_unprepare() ?
> +
> + return 0;
> +}
> +
> +static int meson_gxbb_wdt_remove(struct platform_device *pdev)
> +{
> + struct meson_gxbb_wdt *data = platform_get_drvdata(pdev);
> +
> + watchdog_unregister_device(&data->wdt_dev);
> +
clk_disable_unprepare() ?
> + return 0;
> +}
> +
> +static void meson_gxbb_wdt_shutdown(struct platform_device *pdev)
> +{
> + struct meson_gxbb_wdt *data = platform_get_drvdata(pdev);
> +
> + meson_gxbb_wdt_stop(&data->wdt_dev);
> +}
> +
> +static struct platform_driver meson_gxbb_wdt_driver = {
> + .probe = meson_gxbb_wdt_probe,
> + .remove = meson_gxbb_wdt_remove,
> + .shutdown = meson_gxbb_wdt_shutdown,
> + .driver = {
> + .name = "meson-gxbb-wdt",
> + .pm = &meson_gxbb_wdt_pm_ops,
> + .of_match_table = meson_gxbb_wdt_dt_ids,
> + },
> +};
> +
> +module_platform_driver(meson_gxbb_wdt_driver);
> +
> +MODULE_ALIAS("platform:meson-gxbb-wdt");
> +MODULE_AUTHOR("Neil Armstrong <narmstrong at baylibre.com>");
> +MODULE_DESCRIPTION("Amlogic Meson GXBB Watchdog timer driver");
> +MODULE_LICENSE("Dual BSD/GPL");
>
More information about the linux-arm-kernel
mailing list