[PATCH 15/16] clk: sunxi-ng: Add H3 clocks
Chen-Yu Tsai
wens at csie.org
Mon May 30 09:15:28 PDT 2016
On Mon, May 9, 2016 at 4:01 AM, Maxime Ripard
<maxime.ripard at free-electrons.com> wrote:
> Add the list of clocks and resets found in the H3 CCU.
>
> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> ---
> drivers/clk/sunxi-ng/Makefile | 2 +
> drivers/clk/sunxi-ng/ccu-sun8i-h3.c | 757 +++++++++++++++++++++++++++++++++++
> include/dt-bindings/clock/sun8i-h3.h | 162 ++++++++
> include/dt-bindings/reset/sun8i-h3.h | 103 +++++
> 4 files changed, 1024 insertions(+)
> create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-h3.c
> create mode 100644 include/dt-bindings/clock/sun8i-h3.h
> create mode 100644 include/dt-bindings/reset/sun8i-h3.h
>
> diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
> index c794f57b6fb1..67ff6a92f124 100644
> --- a/drivers/clk/sunxi-ng/Makefile
> +++ b/drivers/clk/sunxi-ng/Makefile
> @@ -13,3 +13,5 @@ obj-y += ccu_nkmp.o
> obj-y += ccu_nm.o
> obj-y += ccu_p.o
> obj-y += ccu_phase.o
> +
> +obj-y += ccu-sun8i-h3.o
> diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
> new file mode 100644
> index 000000000000..5ce699e95c32
> --- /dev/null
> +++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
> @@ -0,0 +1,757 @@
> +/*
> + * Copyright (c) 2016 Maxime Ripard. All rights reserved.
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk-provider.h>
> +
> +#include <dt-bindings/clock/sun8i-h3.h>
> +#include <dt-bindings/reset/sun8i-h3.h>
> +
> +#include "ccu_common.h"
> +#include "ccu_reset.h"
> +
> +#include "ccu_div_table.h"
> +#include "ccu_factor.h"
> +#include "ccu_fixed_factor.h"
> +#include "ccu_gate.h"
> +#include "ccu_m.h"
> +#include "ccu_mp.h"
> +#include "ccu_nk.h"
> +#include "ccu_nkm.h"
> +#include "ccu_nkmp.h"
> +#include "ccu_nm.h"
> +#include "ccu_p.h"
> +#include "ccu_phase.h"
> +
> +static struct ccu_nkmp pll_cpux_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> +
> + .m = SUNXI_CLK_FACTOR(0, 2),
> + .k = SUNXI_CLK_FACTOR(4, 2),
> + .n = SUNXI_CLK_FACTOR(8, 5),
> + .p = SUNXI_CLK_FACTOR(16, 2),
We should find a way to specify a table for p.
> +
> + .common = {
> + .reg = 0x000,
> + .features = CCU_FEATURE_GATE | CCU_FEATURE_LOCK,
> + .hw.init = SUNXI_HW_INIT("pll-cpux",
> + "osc24M",
osc24M is an outside reference. Shouldn't we use put it in a "clocks"
property in the DT, and use of_clk_get_parent_name()?
osc24M can be controlled from the PRCM on other chips. I suspect the
same with the H3. osc32k might also be from the PRCM.
> + &ccu_nkmp_ops,
> + 0),
> + },
> +};
> +
> +static struct ccu_nm pll_audio_base_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> +
> + .m = SUNXI_CLK_FACTOR(0, 5),
> + .n = SUNXI_CLK_FACTOR(8, 7),
> +
> + .common = {
> + .reg = 0x008,
> + .features = CCU_FEATURE_GATE | CCU_FEATURE_LOCK,
> + .hw.init = SUNXI_HW_INIT("pll-audio-base",
> + "osc24M",
> + &ccu_nm_ops,
> + 0),
> + },
> +};
> +
> +static SUNXI_CCU_M(pll_audio_clk, "pll-audio", "pll-audio-base",
> + 0x008, 16, 4, 0);
> +
> +static SUNXI_CCU_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
> + "pll-audio-base", 2, 1, 0);
> +static SUNXI_CCU_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
> + "pll-audio-base", 1, 1, 0);
> +static SUNXI_CCU_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
> + "pll-audio-base", 1, 2, 0);
> +
> +static struct ccu_nm pll_video_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> +
> + .m = SUNXI_CLK_FACTOR(0, 4),
> + .n = SUNXI_CLK_FACTOR(8, 7),
> +
> + .common = {
> + .reg = 0x010,
> + .features = CCU_FEATURE_GATE | CCU_FEATURE_LOCK,
> + .hw.init = SUNXI_HW_INIT("pll-video",
> + "osc24M",
> + &ccu_nm_ops,
> + 0),
> + },
> +};
> +
> +static struct ccu_nm pll_ve_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> +
> + .m = SUNXI_CLK_FACTOR(0, 4),
> + .n = SUNXI_CLK_FACTOR(8, 7),
> +
> + .common = {
> + .reg = 0x018,
> + .features = CCU_FEATURE_GATE | CCU_FEATURE_LOCK,
> + .hw.init = SUNXI_HW_INIT("pll-ve",
> + "osc24M",
> + &ccu_nm_ops,
> + 0),
> + },
> +};
> +
> +static struct ccu_nkm pll_ddr_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> +
> + .n = SUNXI_CLK_FACTOR(8, 5),
> + .k = SUNXI_CLK_FACTOR(4, 2),
> + .m = SUNXI_CLK_FACTOR(0, 2),
We need a special "update" bit (bit 20) for this clock, otherwise changes
don't really take effect.
> +
> + .common = {
> + .reg = 0x020,
> + .features = CCU_FEATURE_GATE | CCU_FEATURE_LOCK,
> + .hw.init = SUNXI_HW_INIT("pll-ddr",
> + "osc24M",
> + &ccu_nkm_ops,
> + 0),
> + },
> +};
> +
> +static struct ccu_nk pll_periph0_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> +
> + .k = SUNXI_CLK_FACTOR(4, 2),
> + .n = SUNXI_CLK_FACTOR(8, 5),
> + .fixed_post_div = 2,
> +
> + .common = {
> + .reg = 0x028,
> + .features = (CCU_FEATURE_GATE |
> + CCU_FEATURE_LOCK |
> + CCU_FEATURE_FIXED_POSTDIV),
> + .hw.init = SUNXI_HW_INIT("pll-periph0",
> + "osc24M",
> + &ccu_nk_ops,
> + 0),
> + },
> +};
> +
> +static SUNXI_CCU_FIXED_FACTOR(pll_periph0_2x_clk, "pll-periph0-2x",
> + "pll-periph0", 1, 2, 0);
> +
> +static struct ccu_nm pll_gpu_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> +
> + .m = SUNXI_CLK_FACTOR(0, 4),
> + .n = SUNXI_CLK_FACTOR(8, 7),
> +
> + .common = {
> + .reg = 0x038,
> + .features = CCU_FEATURE_GATE | CCU_FEATURE_LOCK,
> + .hw.init = SUNXI_HW_INIT("pll-gpu",
> + "osc24M",
> + &ccu_nm_ops,
> + 0),
> + },
> +};
> +
> +static struct ccu_nk pll_periph1_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> +
> + .k = SUNXI_CLK_FACTOR(4, 2),
> + .n = SUNXI_CLK_FACTOR(8, 5),
> + .fixed_post_div = 2,
> +
> + .common = {
> + .reg = 0x044,
> + .features = (CCU_FEATURE_GATE |
> + CCU_FEATURE_LOCK |
> + CCU_FEATURE_FIXED_POSTDIV),
> + .hw.init = SUNXI_HW_INIT("pll-periph1",
> + "osc24M",
> + &ccu_nk_ops,
> + 0),
> + },
> +};
> +
> +static struct ccu_nm pll_de_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> +
> + .m = SUNXI_CLK_FACTOR(0, 4),
> + .n = SUNXI_CLK_FACTOR(8, 7),
> +
> + .common = {
> + .reg = 0x048,
> + .features = CCU_FEATURE_GATE | CCU_FEATURE_LOCK,
> + .hw.init = SUNXI_HW_INIT("pll-de",
> + "osc24M",
> + &ccu_nm_ops,
> + 0),
> + },
> +};
> +
> +static const char * const cpux_parents[] = { "osc32k", "osc24M", "pll-cpux" , "pll-cpux" };
> +static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
> + 0x050, 16, 2, CLK_IS_CRITICAL);
Nit: Is it necessary to split this line?
> +
> +static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x050, 0, 2, 0);
This register also has a "System APB" clock. Any idea what that is?
> +
> +static const char * const ahb1_parents[] = { "osc32k", "osc24M", "axi" , "pll-periph0" };
> +static struct ccu_p ahb1_clk = {
> + .p = SUNXI_CLK_FACTOR(4, 2),
> +
> + .mux = {
> + .shift = 12,
> + .width = 2,
> +
> + .variable_prediv = {
> + .index = 3,
> + .shift = 6,
> + .width = 2,
> + },
> + },
> +
> + .common = {
> + .reg = 0x054,
> + .features = CCU_FEATURE_VARIABLE_PREDIV,
> + .hw.init = SUNXI_HW_INIT_PARENTS("ahb1",
> + ahb1_parents,
> + &ccu_p_ops,
> + 0),
> + },
> +};
> +
> +static u8 apb1_div_table [] = { 2, 2, 4, 8 };
> +static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1",
> + 0x054, 8, 2, apb1_div_table, 0);
> +
> +static const char * const apb2_parents[] = { "osc32k", "osc24M",
> + "pll-periph0" , "pll-periph0" };
> +static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
> + 0, 5, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + 0);
> +
> +static const char * const ahb2_parents[] = { "ahb1" , "pll-periph0" };
> +static struct ccu_mux ahb2_clk = {
> + .mux = {
> + .shift = 0,
> + .width = 1,
> +
> + .fixed_prediv = {
> + .index = 1,
> + .div = 2,
> + },
> + },
> +
> + .common = {
> + .reg = 0x05c,
> + .features = CCU_FEATURE_FIXED_PREDIV,
> + .hw.init = SUNXI_HW_INIT_PARENTS("ahb2",
> + ahb2_parents,
> + &ccu_mux_ops,
> + 0),
> + },
> +};
> +
> +static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "ahb1",
> + 0x060, BIT(5), 0);
> +static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "ahb1",
> + 0x060, BIT(6), 0);
> +static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb1",
> + 0x060, BIT(8), 0);
> +static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb1",
> + 0x060, BIT(9), 0);
> +static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb1",
> + 0x060, BIT(10), 0);
> +static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb1",
> + 0x060, BIT(13), 0);
> +static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "ahb1",
> + 0x060, BIT(14), 0);
> +static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb2",
> + 0x060, BIT(17), 0);
> +static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb1",
> + 0x060, BIT(18), 0);
> +static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "ahb1",
> + 0x060, BIT(19), 0);
> +static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb1",
> + 0x060, BIT(20), 0);
> +static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb1",
> + 0x060, BIT(21), 0);
> +static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb1",
> + 0x060, BIT(23), 0);
> +static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb2",
Clock diagram says ?HCI 1/2/3 are on ahb2, while otg (I assume it includes
both the OTG controller and the associated ?HCI) is on ahb1.
> + 0x060, BIT(24), 0);
> +static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb2",
> + 0x060, BIT(25), 0);
> +static SUNXI_CCU_GATE(bus_ehci2_clk, "bus-ehci2", "ahb2",
> + 0x060, BIT(26), 0);
> +static SUNXI_CCU_GATE(bus_ehci3_clk, "bus-ehci3", "ahb2",
> + 0x060, BIT(27), 0);
> +static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb2",
> + 0x060, BIT(28), 0);
> +static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb2",
> + 0x060, BIT(29), 0);
> +static SUNXI_CCU_GATE(bus_ohci2_clk, "bus-ohci2", "ahb2",
> + 0x060, BIT(30), 0);
> +static SUNXI_CCU_GATE(bus_ohci3_clk, "bus-ohci3", "ahb2",
> + 0x060, BIT(31), 0);
> +
> +static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "ahb1",
> + 0x064, BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_tcon0_clk, "bus-tcon0", "ahb1",
> + 0x064, BIT(3), 0);
> +static SUNXI_CCU_GATE(bus_tcon1_clk, "bus-tcon1", "ahb1",
> + 0x064, BIT(4), 0);
> +static SUNXI_CCU_GATE(bus_deinterlace_clk, "bus-deinterlace", "ahb1",
> + 0x064, BIT(5), 0);
> +static SUNXI_CCU_GATE(bus_csi_clk, "bus-csi", "ahb1",
> + 0x064, BIT(8), 0);
> +static SUNXI_CCU_GATE(bus_tve_clk, "bus-tve", "ahb1",
> + 0x064, BIT(9), 0);
> +static SUNXI_CCU_GATE(bus_hdmi_clk, "bus-hdmi", "ahb1",
> + 0x064, BIT(11), 0);
> +static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "ahb1",
> + 0x064, BIT(12), 0);
> +static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "ahb1",
> + 0x064, BIT(20), 0);
> +static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "ahb1",
> + 0x064, BIT(21), 0);
> +static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "ahb1",
> + 0x064, BIT(22), 0);
> +
> +static SUNXI_CCU_GATE(bus_codec_clk, "bus-codec", "apb1",
> + 0x068, BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1",
> + 0x068, BIT(1), 0);
> +static SUNXI_CCU_GATE(bus_pio_clk, "bus-pio", "apb1",
> + 0x068, BIT(5), 0);
> +static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1",
> + 0x068, BIT(8), 0);
> +static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1",
> + 0x068, BIT(12), 0);
> +static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb1",
> + 0x068, BIT(13), 0);
> +static SUNXI_CCU_GATE(bus_i2s2_clk, "bus-i2s2", "apb1",
> + 0x068, BIT(14), 0);
> +
> +static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2",
> + 0x06c, BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2",
> + 0x06c, BIT(1), 0);
> +static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2",
> + 0x06c, BIT(2), 0);
> +static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2",
> + 0x06c, BIT(16), 0);
> +static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2",
> + 0x06c, BIT(17), 0);
> +static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2",
> + 0x06c, BIT(18), 0);
> +static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2",
> + 0x06c, BIT(19), 0);
> +static SUNXI_CCU_GATE(bus_scr_clk, "bus-scr", "apb2",
> + 0x06c, BIT(20), 0);
> +
> +static SUNXI_CCU_GATE(bus_ephy_clk, "bus-ephy", "ahb1",
> + 0x070, BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "ahb1",
> + 0x070, BIT(7), 0);
Maybe not split these lines? IMHO it's easier to read as table.
> +
> +static u8 ths_div_table [] = { 1, 2, 4, 6 };
> +static SUNXI_CCU_DIV_TABLE_WITH_GATE(ths_clk, "ths", "osc24M",
> + 0x074, 0, 2, ths_div_table, BIT(31), 0);
The clock actually has a mux, which has only one valid parent.
Should we include it?
> +
> +static const char * const nand_parents[] = { "osc24M", "pll-periph0",
> + "pll-periph1" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", nand_parents, 0x080,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static const char * const mmc0_parents[] = { "osc24M", "pll-periph0",
> + "pll-periph1" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mmc0_parents, 0x088,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_PHASE(mmc0_sample_clk, "mmc0_sample", "mmc0",
> + 0x088, 20, 3, 0);
> +static SUNXI_CCU_PHASE(mmc0_output_clk, "mmc0_output", "mmc0",
> + 0x088, 8, 3, 0);
> +
> +static const char * const mmc1_parents[] = { "osc24M", "pll-periph0",
> + "pll-periph1" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mmc1_parents, 0x08c,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_PHASE(mmc1_sample_clk, "mmc1_sample", "mmc1",
> + 0x08c, 20, 3, 0);
> +static SUNXI_CCU_PHASE(mmc1_output_clk, "mmc1_output", "mmc1",
> + 0x08c, 8, 3, 0);
> +
> +static const char * const mmc2_parents[] = { "osc24M", "pll-periph0",
> + "pll-periph1" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mmc2_parents, 0x090,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_PHASE(mmc2_sample_clk, "mmc2_sample", "mmc2",
> + 0x090, 20, 3, 0);
> +static SUNXI_CCU_PHASE(mmc2_output_clk, "mmc2_output", "mmc2",
> + 0x090, 8, 3, 0);
> +
> +static const char * const ts_parents[] = { "osc24M", "pll-periph0", };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x098,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 1, /* mux */
The mux is 4 bits wide with only 2 valid parents.
> + BIT(31), /* gate */
> + 0);
> +
> +static const char * const ce_parents[] = { "osc24M", "pll-periph0",
> + "pll-periph1" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x09c,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static const char * const spi0_parents[] = { "osc24M", "pll-periph0",
> + "pll-periph1" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", spi0_parents, 0x0a0,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static const char * const spi1_parents[] = { "osc24M", "pll-periph0",
> + "pll-periph1" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", spi1_parents, 0x0a4,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static const char * const i2s0_parents[] = { "pll-audio-8x", "pll-audio-4x",
> + "pll-audio-2x" , "pll-audio" };
> +static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s0_parents,
> + 0x0b0, 16, 2, BIT(31), 0);
> +
> +static const char * const i2s1_parents[] = { "pll-audio-8x", "pll-audio-4x",
> + "pll-audio-2x" , "pll-audio" };
> +static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", i2s1_parents,
> + 0x0b4, 16, 2, BIT(31), 0);
> +
> +static const char * const i2s2_parents[] = { "pll-audio-8x", "pll-audio-4x",
> + "pll-audio-2x" , "pll-audio" };
> +static SUNXI_CCU_MUX_WITH_GATE(i2s2_clk, "i2s2", i2s2_parents,
> + 0x0b8, 16, 2, BIT(31), 0);
> +
> +static SUNXI_CCU_M_WITH_GATE(spdif_clk, "spdif", "pll-audio",
> + 0x0c0, 0, 4, BIT(31), 0);
> +
> +static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M",
> + 0x0cc, BIT(8), 0);
> +static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M",
> + 0x0cc, BIT(9), 0);
> +static SUNXI_CCU_GATE(usb_phy2_clk, "usb-phy2", "osc24M",
> + 0x0cc, BIT(10), 0);
> +static SUNXI_CCU_GATE(usb_phy3_clk, "usb-phy3", "osc24M",
> + 0x0cc, BIT(11), 0);
> +static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc24M",
> + 0x0cc, BIT(16), 0);
> +static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "osc24M",
> + 0x0cc, BIT(17), 0);
> +static SUNXI_CCU_GATE(usb_ohci2_clk, "usb-ohci2", "osc24M",
> + 0x0cc, BIT(18), 0);
> +static SUNXI_CCU_GATE(usb_ohci3_clk, "usb-ohci3", "osc24M",
> + 0x0cc, BIT(19), 0);
> +
> +static const char * const dram_parents[] = { "pll-ddr", "pll-periph0-2x" };
> +static SUNXI_CCU_M_WITH_MUX(dram_clk, "dram", dram_parents,
> + 0x0f4, 0, 4, 20, 1, 0);
Mux is 2 bits wide. Also need an update bit setting for this clock.
(or mark it read-only?)
> +
> +static SUNXI_CCU_GATE(dram_ve_clk, "dram-ve", "dram",
> + 0x100, BIT(0), 0);
> +static SUNXI_CCU_GATE(dram_csi_clk, "dram-csi", "dram",
> + 0x100, BIT(1), 0);
> +static SUNXI_CCU_GATE(dram_deinterlace_clk, "dram-deinterlace", "dram",
> + 0x100, BIT(2), 0);
> +static SUNXI_CCU_GATE(dram_ts_clk, "dram-ts", "dram",
> + 0x100, BIT(3), 0);
> +
> +static const char * const de_parents[] = { "pll-periph0-2x", "pll-de" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
> + 0x104, 0, 4, 24, 1, BIT(31), 0);
> +
> +static SUNXI_CCU_M_WITH_GATE(tcon_clk, "tcon", "pll-video",
> + 0x118, 0, 4, BIT(31), 0);
> +
> +static const char * const tve_parents[] = { "pll-de", "pll-periph1" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(tve_clk, "tve", tve_parents,
> + 0x120, 0, 4, 24, 1, BIT(31), 0);
> +
> +static const char * const deinterlace_parents[] = { "pll-periph0", "pll-periph1" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace", deinterlace_parents,
> + 0x124, 0, 4, 24, 1, BIT(31), 0);
Mux is 3 bits wide for DE, TCON, TVE, and DEINTERLACE clocks.
> +
> +static SUNXI_CCU_GATE(csi_misc_clk, "csi-misc", "osc24M",
> + 0x130, BIT(31), 0);
> +
> +static const char * const csi_sclk_parents[] = { "pll-periph0", "pll-periph1" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(csi_sclk_clk, "csi-sclk", csi_sclk_parents,
> + 0x134, 16, 4, 24, 1, BIT(31), 0);
Mux is 3 bits wide.
> +
> +static const char * const csi_mclk_parents[] = { "osc24M", "pll-video", "pll-periph0" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(csi_mclk_clk, "csi-mclk", csi_mclk_parents,
> + 0x134, 0, 5, 8, 2, BIT(15), 0);
Same here.
> +
> +static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve",
> + 0x13c, 16, 3, BIT(31), 0);
> +
> +static SUNXI_CCU_GATE(ac_dig_clk, "ac-dig", "pll-audio",
> + 0x140, BIT(31), 0);
> +static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M",
> + 0x144, BIT(31), 0);
> +
> +static SUNXI_CCU_M_WITH_GATE(hdmi_clk, "hdmi", "pll-video",
> + 0x150, 0, 4, BIT(31), 0);
2 bit mux?
> +
> +static SUNXI_CCU_GATE(hdmi_ddc_clk, "hdmi-ddc", "osc24M",
> + 0x154, BIT(31), 0);
> +
> +static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x", "pll-ddr" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents,
> + 0x15c, 0, 3, 24, 2, BIT(31), CLK_IS_CRITICAL);
> +
> +static SUNXI_CCU_M_WITH_GATE(gpu_clk, "gpu", "pll-gpu",
> + 0x1a0, 0, 3, BIT(31), 0);
> +
> +static struct ccu_common *sun8i_h3_ccu_clks[] = {
> + [CLK_PLL_CPUX] = &pll_cpux_clk.common,
> + [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common,
> + [CLK_PLL_AUDIO] = &pll_audio_clk.common,
> + [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.common,
> + [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.common,
> + [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.common,
> + [CLK_PLL_VIDEO] = &pll_video_clk.common,
> + [CLK_PLL_VE] = &pll_ve_clk.common,
> + [CLK_PLL_DDR] = &pll_ddr_clk.common,
> + [CLK_PLL_PERIPH0] = &pll_periph0_clk.common,
> + [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.common,
> + [CLK_PLL_GPU] = &pll_gpu_clk.common,
> + [CLK_PLL_PERIPH1] = &pll_periph1_clk.common,
> + [CLK_PLL_DE] = &pll_de_clk.common,
> + [CLK_CPUX] = &cpux_clk.common,
> + [CLK_AXI] = &axi_clk.common,
> + [CLK_AHB1] = &ahb1_clk.common,
> + [CLK_APB1] = &apb1_clk.common,
> + [CLK_APB2] = &apb2_clk.common,
> + [CLK_AHB2] = &ahb2_clk.common,
> + [CLK_BUS_CE] = &bus_ce_clk.common,
> + [CLK_BUS_DMA] = &bus_dma_clk.common,
> + [CLK_BUS_MMC0] = &bus_mmc0_clk.common,
> + [CLK_BUS_MMC1] = &bus_mmc1_clk.common,
> + [CLK_BUS_MMC2] = &bus_mmc2_clk.common,
> + [CLK_BUS_NAND] = &bus_nand_clk.common,
> + [CLK_BUS_DRAM] = &bus_dram_clk.common,
> + [CLK_BUS_EMAC] = &bus_emac_clk.common,
> + [CLK_BUS_TS] = &bus_ts_clk.common,
> + [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common,
> + [CLK_BUS_SPI0] = &bus_spi0_clk.common,
> + [CLK_BUS_SPI1] = &bus_spi1_clk.common,
> + [CLK_BUS_OTG] = &bus_otg_clk.common,
> + [CLK_BUS_EHCI0] = &bus_ehci0_clk.common,
> + [CLK_BUS_EHCI1] = &bus_ehci1_clk.common,
> + [CLK_BUS_EHCI2] = &bus_ehci2_clk.common,
> + [CLK_BUS_EHCI3] = &bus_ehci3_clk.common,
> + [CLK_BUS_OHCI0] = &bus_ohci0_clk.common,
> + [CLK_BUS_OHCI1] = &bus_ohci1_clk.common,
> + [CLK_BUS_OHCI2] = &bus_ohci2_clk.common,
> + [CLK_BUS_OHCI3] = &bus_ohci3_clk.common,
> + [CLK_BUS_VE] = &bus_ve_clk.common,
> + [CLK_BUS_TCON0] = &bus_tcon0_clk.common,
> + [CLK_BUS_TCON1] = &bus_tcon1_clk.common,
> + [CLK_BUS_DEINTERLACE] = &bus_deinterlace_clk.common,
> + [CLK_BUS_CSI] = &bus_csi_clk.common,
> + [CLK_BUS_TVE] = &bus_tve_clk.common,
> + [CLK_BUS_HDMI] = &bus_hdmi_clk.common,
> + [CLK_BUS_DE] = &bus_de_clk.common,
> + [CLK_BUS_GPU] = &bus_gpu_clk.common,
> + [CLK_BUS_MSGBOX] = &bus_msgbox_clk.common,
> + [CLK_BUS_SPINLOCK] = &bus_spinlock_clk.common,
> + [CLK_BUS_CODEC] = &bus_codec_clk.common,
> + [CLK_BUS_SPDIF] = &bus_spdif_clk.common,
> + [CLK_BUS_PIO] = &bus_pio_clk.common,
> + [CLK_BUS_THS] = &bus_ths_clk.common,
> + [CLK_BUS_I2S0] = &bus_i2s0_clk.common,
> + [CLK_BUS_I2S1] = &bus_i2s1_clk.common,
> + [CLK_BUS_I2S2] = &bus_i2s2_clk.common,
> + [CLK_BUS_I2C0] = &bus_i2c0_clk.common,
> + [CLK_BUS_I2C1] = &bus_i2c1_clk.common,
> + [CLK_BUS_I2C2] = &bus_i2c2_clk.common,
> + [CLK_BUS_UART0] = &bus_uart0_clk.common,
> + [CLK_BUS_UART1] = &bus_uart1_clk.common,
> + [CLK_BUS_UART2] = &bus_uart2_clk.common,
> + [CLK_BUS_UART3] = &bus_uart3_clk.common,
> + [CLK_BUS_SCR] = &bus_scr_clk.common,
> + [CLK_BUS_EPHY] = &bus_ephy_clk.common,
> + [CLK_BUS_DBG] = &bus_dbg_clk.common,
> + [CLK_THS] = &ths_clk.common,
> + [CLK_NAND] = &nand_clk.common,
> + [CLK_MMC0] = &mmc0_clk.common,
> + [CLK_MMC0_SAMPLE] = &mmc0_sample_clk.common,
> + [CLK_MMC0_OUTPUT] = &mmc0_output_clk.common,
> + [CLK_MMC1] = &mmc1_clk.common,
> + [CLK_MMC1_SAMPLE] = &mmc1_sample_clk.common,
> + [CLK_MMC1_OUTPUT] = &mmc1_output_clk.common,
> + [CLK_MMC2] = &mmc2_clk.common,
> + [CLK_MMC2_SAMPLE] = &mmc2_sample_clk.common,
> + [CLK_MMC2_OUTPUT] = &mmc2_output_clk.common,
> + [CLK_TS] = &ts_clk.common,
> + [CLK_CE] = &ce_clk.common,
> + [CLK_SPI0] = &spi0_clk.common,
> + [CLK_SPI1] = &spi1_clk.common,
> + [CLK_I2S0] = &i2s0_clk.common,
> + [CLK_I2S1] = &i2s1_clk.common,
> + [CLK_I2S2] = &i2s2_clk.common,
> + [CLK_SPDIF] = &spdif_clk.common,
> + [CLK_USB_PHY0] = &usb_phy0_clk.common,
> + [CLK_USB_PHY1] = &usb_phy1_clk.common,
> + [CLK_USB_PHY2] = &usb_phy2_clk.common,
> + [CLK_USB_PHY3] = &usb_phy3_clk.common,
> + [CLK_USB_OHCI0] = &usb_ohci0_clk.common,
> + [CLK_USB_OHCI1] = &usb_ohci1_clk.common,
> + [CLK_USB_OHCI2] = &usb_ohci2_clk.common,
> + [CLK_USB_OHCI3] = &usb_ohci3_clk.common,
> + [CLK_DRAM] = &dram_clk.common,
> + [CLK_DRAM_VE] = &dram_ve_clk.common,
> + [CLK_DRAM_CSI] = &dram_csi_clk.common,
> + [CLK_DRAM_DEINTERLACE] = &dram_deinterlace_clk.common,
> + [CLK_DRAM_TS] = &dram_ts_clk.common,
> + [CLK_DE] = &de_clk.common,
> + [CLK_TCON0] = &tcon_clk.common,
> + [CLK_TVE] = &tve_clk.common,
> + [CLK_DEINTERLACE] = &deinterlace_clk.common,
> + [CLK_CSI_MISC] = &csi_misc_clk.common,
> + [CLK_CSI_SCLK] = &csi_sclk_clk.common,
> + [CLK_CSI_MCLK] = &csi_mclk_clk.common,
> + [CLK_VE] = &ve_clk.common,
> + [CLK_AC_DIG] = &ac_dig_clk.common,
> + [CLK_AVS] = &avs_clk.common,
> + [CLK_HDMI] = &hdmi_clk.common,
> + [CLK_HDMI_DDC] = &hdmi_ddc_clk.common,
> + [CLK_MBUS] = &mbus_clk.common,
> + [CLK_GPU] = &gpu_clk.common,
> +};
> +
> +static struct ccu_reset_map sun8i_h3_ccu_resets[] = {
> + [RST_USB_PHY0] = { 0x0cc, BIT(0) },
> + [RST_USB_PHY1] = { 0x0cc, BIT(1) },
> + [RST_USB_PHY2] = { 0x0cc, BIT(2) },
> + [RST_USB_PHY3] = { 0x0cc, BIT(3) },
> +
> + [RST_MBUS] = { 0x0fc, BIT(31) },
> +
> + [RST_BUS_CE] = { 0x2c0, BIT(5) },
> + [RST_BUS_DMA] = { 0x2c0, BIT(6) },
> + [RST_BUS_MMC0] = { 0x2c0, BIT(8) },
> + [RST_BUS_MMC1] = { 0x2c0, BIT(9) },
> + [RST_BUS_MMC2] = { 0x2c0, BIT(10) },
> + [RST_BUS_NAND] = { 0x2c0, BIT(13) },
> + [RST_BUS_DRAM] = { 0x2c0, BIT(14) },
> + [RST_BUS_EMAC] = { 0x2c0, BIT(17) },
> + [RST_BUS_TS] = { 0x2c0, BIT(18) },
> + [RST_BUS_HSTIMER] = { 0x2c0, BIT(19) },
> + [RST_BUS_SPI0] = { 0x2c0, BIT(20) },
> + [RST_BUS_SPI1] = { 0x2c0, BIT(21) },
> + [RST_BUS_OTG] = { 0x2c0, BIT(23) },
> + [RST_BUS_EHCI0] = { 0x2c0, BIT(24) },
> + [RST_BUS_EHCI1] = { 0x2c0, BIT(25) },
> + [RST_BUS_EHCI2] = { 0x2c0, BIT(26) },
> + [RST_BUS_EHCI3] = { 0x2c0, BIT(27) },
> + [RST_BUS_OHCI0] = { 0x2c0, BIT(28) },
> + [RST_BUS_OHCI1] = { 0x2c0, BIT(29) },
> + [RST_BUS_OHCI2] = { 0x2c0, BIT(30) },
> + [RST_BUS_OHCI3] = { 0x2c0, BIT(31) },
> +
> + [RST_BUS_VE] = { 0x2c4, BIT(0) },
> + [RST_BUS_TCON0] = { 0x2c4, BIT(3) },
> + [RST_BUS_TCON1] = { 0x2c4, BIT(4) },
> + [RST_BUS_DEINTERLACE] = { 0x2c4, BIT(5) },
> + [RST_BUS_CSI] = { 0x2c4, BIT(8) },
> + [RST_BUS_TVE] = { 0x2c4, BIT(9) },
> + [RST_BUS_HDMI0] = { 0x2c4, BIT(10) },
> + [RST_BUS_HDMI1] = { 0x2c4, BIT(11) },
> + [RST_BUS_DE] = { 0x2c4, BIT(12) },
> + [RST_BUS_GPU] = { 0x2c4, BIT(20) },
> + [RST_BUS_MSGBOX] = { 0x2c4, BIT(21) },
> + [RST_BUS_SPINLOCK] = { 0x2c4, BIT(22) },
> + [RST_BUS_DBG] = { 0x2c4, BIT(31) },
> +
> + [RST_BUS_EPHY] = { 0x2c8, BIT(2) },
> +
> + [RST_BUS_CODEC] = { 0x2d0, BIT(0) },
> + [RST_BUS_SPDIF] = { 0x2d0, BIT(1) },
> + [RST_BUS_THS] = { 0x2d0, BIT(8) },
> + [RST_BUS_I2S0] = { 0x2d0, BIT(12) },
> + [RST_BUS_I2S1] = { 0x2d0, BIT(13) },
> + [RST_BUS_I2S2] = { 0x2d0, BIT(14) },
> +
> + [RST_BUS_I2C0] = { 0x2d4, BIT(0) },
> + [RST_BUS_I2C1] = { 0x2d4, BIT(1) },
> + [RST_BUS_I2C2] = { 0x2d4, BIT(2) },
> + [RST_BUS_UART0] = { 0x2d4, BIT(16) },
> + [RST_BUS_UART1] = { 0x2d4, BIT(17) },
> + [RST_BUS_UART2] = { 0x2d4, BIT(18) },
> + [RST_BUS_UART3] = { 0x2d4, BIT(19) },
> + [RST_BUS_SCR] = { 0x2d4, BIT(20) },
> +};
> +
> +static const struct sunxi_ccu_desc sun8i_h3_ccu_desc = {
> + .clks = sun8i_h3_ccu_clks,
> + .num_clks = ARRAY_SIZE(sun8i_h3_ccu_clks),
> +
> + .resets = sun8i_h3_ccu_resets,
> + .num_resets = ARRAY_SIZE(sun8i_h3_ccu_resets),
> +};
> +
> +static void __init sun8i_h3_ccu_setup(struct device_node *node)
> +{
> + sunxi_ccu_probe(node, &sun8i_h3_ccu_desc);
> +}
> +CLK_OF_DECLARE(sun8i_h3_ccu, "allwinner,sun8i-h3-ccu",
> + sun8i_h3_ccu_setup);
> diff --git a/include/dt-bindings/clock/sun8i-h3.h b/include/dt-bindings/clock/sun8i-h3.h
> new file mode 100644
> index 000000000000..96eced56e7a2
> --- /dev/null
> +++ b/include/dt-bindings/clock/sun8i-h3.h
> @@ -0,0 +1,162 @@
> +/*
> + * Copyright (C) 2016 Maxime Ripard <maxime.ripard at free-electrons.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#ifndef _DT_BINDINGS_CLK_SUN8I_H3_H_
> +#define _DT_BINDINGS_CLK_SUN8I_H3_H_
> +
> +#define CLK_PLL_CPUX 0
> +#define CLK_PLL_AUDIO_BASE 1
> +#define CLK_PLL_AUDIO 2
> +#define CLK_PLL_AUDIO_2X 3
> +#define CLK_PLL_AUDIO_4X 4
> +#define CLK_PLL_AUDIO_8X 5
> +#define CLK_PLL_VIDEO 6
> +#define CLK_PLL_VE 7
> +#define CLK_PLL_DDR 8
> +#define CLK_PLL_PERIPH0 9
> +#define CLK_PLL_PERIPH0_2X 10
> +#define CLK_PLL_GPU 11
> +#define CLK_PLL_PERIPH1 12
> +#define CLK_PLL_DE 13
> +#define CLK_CPUX 14
> +#define CLK_AXI 15
> +#define CLK_AHB1 16
> +#define CLK_APB1 17
> +#define CLK_APB2 18
> +#define CLK_AHB2 19
> +#define CLK_BUS_CE 20
> +#define CLK_BUS_DMA 21
> +#define CLK_BUS_MMC0 22
> +#define CLK_BUS_MMC1 23
> +#define CLK_BUS_MMC2 24
> +#define CLK_BUS_NAND 25
> +#define CLK_BUS_DRAM 26
> +#define CLK_BUS_EMAC 27
> +#define CLK_BUS_TS 28
> +#define CLK_BUS_HSTIMER 29
> +#define CLK_BUS_SPI0 30
> +#define CLK_BUS_SPI1 31
> +#define CLK_BUS_OTG 32
> +#define CLK_BUS_EHCI0 33
> +#define CLK_BUS_EHCI1 34
> +#define CLK_BUS_EHCI2 35
> +#define CLK_BUS_EHCI3 36
> +#define CLK_BUS_OHCI0 37
> +#define CLK_BUS_OHCI1 38
> +#define CLK_BUS_OHCI2 39
> +#define CLK_BUS_OHCI3 40
> +#define CLK_BUS_VE 41
> +#define CLK_BUS_TCON0 42
> +#define CLK_BUS_TCON1 43
> +#define CLK_BUS_DEINTERLACE 44
> +#define CLK_BUS_CSI 45
> +#define CLK_BUS_TVE 46
> +#define CLK_BUS_HDMI 47
> +#define CLK_BUS_DE 48
> +#define CLK_BUS_GPU 49
> +#define CLK_BUS_MSGBOX 50
> +#define CLK_BUS_SPINLOCK 51
> +#define CLK_BUS_CODEC 52
> +#define CLK_BUS_SPDIF 53
> +#define CLK_BUS_PIO 54
> +#define CLK_BUS_THS 55
> +#define CLK_BUS_I2S0 56
> +#define CLK_BUS_I2S1 57
> +#define CLK_BUS_I2S2 58
> +#define CLK_BUS_I2C0 59
> +#define CLK_BUS_I2C1 60
> +#define CLK_BUS_I2C2 61
> +#define CLK_BUS_UART0 62
> +#define CLK_BUS_UART1 63
> +#define CLK_BUS_UART2 64
> +#define CLK_BUS_UART3 65
> +#define CLK_BUS_SCR 66
> +#define CLK_BUS_EPHY 67
> +#define CLK_BUS_DBG 68
> +#define CLK_THS 69
> +#define CLK_NAND 70
> +#define CLK_MMC0 71
> +#define CLK_MMC0_SAMPLE 72
> +#define CLK_MMC0_OUTPUT 73
> +#define CLK_MMC1 74
> +#define CLK_MMC1_SAMPLE 75
> +#define CLK_MMC1_OUTPUT 76
> +#define CLK_MMC2 77
> +#define CLK_MMC2_SAMPLE 78
> +#define CLK_MMC2_OUTPUT 79
> +#define CLK_TS 80
> +#define CLK_CE 81
> +#define CLK_SPI0 82
> +#define CLK_SPI1 83
> +#define CLK_I2S0 84
> +#define CLK_I2S1 85
> +#define CLK_I2S2 86
> +#define CLK_SPDIF 87
> +#define CLK_USB_PHY0 88
> +#define CLK_USB_PHY1 89
> +#define CLK_USB_PHY2 90
> +#define CLK_USB_PHY3 91
> +#define CLK_USB_OHCI0 92
> +#define CLK_USB_OHCI1 93
> +#define CLK_USB_OHCI2 94
> +#define CLK_USB_OHCI3 95
> +#define CLK_DRAM 96
> +#define CLK_DRAM_VE 97
> +#define CLK_DRAM_CSI 98
> +#define CLK_DRAM_DEINTERLACE 99
> +#define CLK_DRAM_TS 100
> +#define CLK_DE 101
> +#define CLK_TCON0 102
> +#define CLK_TVE 103
> +#define CLK_DEINTERLACE 104
> +#define CLK_CSI_MISC 105
> +#define CLK_CSI_SCLK 106
> +#define CLK_CSI_MCLK 107
> +#define CLK_VE 108
> +#define CLK_AC_DIG 109
> +#define CLK_AVS 110
> +#define CLK_HDMI 111
> +#define CLK_HDMI_DDC 112
> +#define CLK_MBUS 113
> +#define CLK_GPU 114
> +
> +#endif /* _DT_BINDINGS_CLK_SUN8I_H3_H_ */
> diff --git a/include/dt-bindings/reset/sun8i-h3.h b/include/dt-bindings/reset/sun8i-h3.h
> new file mode 100644
> index 000000000000..6b7af80c26ec
> --- /dev/null
> +++ b/include/dt-bindings/reset/sun8i-h3.h
> @@ -0,0 +1,103 @@
> +/*
> + * Copyright (C) 2016 Maxime Ripard <maxime.ripard at free-electrons.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#ifndef _DT_BINDINGS_RST_SUN8I_H3_H_
> +#define _DT_BINDINGS_RST_SUN8I_H3_H_
> +
> +#define RST_USB_PHY0 0
> +#define RST_USB_PHY1 1
> +#define RST_USB_PHY2 2
> +#define RST_USB_PHY3 3
> +
> +#define RST_MBUS 4
> +
> +#define RST_BUS_CE 5
> +#define RST_BUS_DMA 6
> +#define RST_BUS_MMC0 7
> +#define RST_BUS_MMC1 8
> +#define RST_BUS_MMC2 9
> +#define RST_BUS_NAND 10
> +#define RST_BUS_DRAM 11
> +#define RST_BUS_EMAC 12
> +#define RST_BUS_TS 13
> +#define RST_BUS_HSTIMER 14
> +#define RST_BUS_SPI0 15
> +#define RST_BUS_SPI1 16
> +#define RST_BUS_OTG 17
> +#define RST_BUS_EHCI0 18
> +#define RST_BUS_EHCI1 19
> +#define RST_BUS_EHCI2 20
> +#define RST_BUS_EHCI3 21
> +#define RST_BUS_OHCI0 22
> +#define RST_BUS_OHCI1 23
> +#define RST_BUS_OHCI2 24
> +#define RST_BUS_OHCI3 25
> +#define RST_BUS_VE 26
> +#define RST_BUS_TCON0 27
> +#define RST_BUS_TCON1 28
> +#define RST_BUS_DEINTERLACE 29
> +#define RST_BUS_CSI 30
> +#define RST_BUS_TVE 31
> +#define RST_BUS_HDMI0 32
> +#define RST_BUS_HDMI1 33
> +#define RST_BUS_DE 34
> +#define RST_BUS_GPU 35
> +#define RST_BUS_MSGBOX 36
> +#define RST_BUS_SPINLOCK 37
> +#define RST_BUS_DBG 38
> +#define RST_BUS_EPHY 39
> +#define RST_BUS_CODEC 40
> +#define RST_BUS_SPDIF 41
> +#define RST_BUS_THS 42
> +#define RST_BUS_I2S0 43
> +#define RST_BUS_I2S1 44
> +#define RST_BUS_I2S2 45
> +#define RST_BUS_I2C0 46
> +#define RST_BUS_I2C1 47
> +#define RST_BUS_I2C2 48
> +#define RST_BUS_UART0 49
> +#define RST_BUS_UART1 50
> +#define RST_BUS_UART2 51
> +#define RST_BUS_UART3 52
> +#define RST_BUS_SCR 53
> +
> +#endif /* _DT_BINDINGS_RST_SUN8I_H3_H_ */
> --
> 2.8.2
>
The rest looks good. Sorry it took so long.
About the mux widths, I prefer to have the full width, even if only the first
few values are valid. It would prevent someone playing with the registers (or
bad code) and the values sticking, before the kernel loads. Then the kernel
won't think that it set a valid parent, but the high bit was not cleared, and
whatever peripheral ended up not working.
Regards
ChenYu
More information about the linux-arm-kernel
mailing list