[PATCH 7/7] phy: Add Northstar2 PCI Phy support

[Pramod Kumar]

Add PCI Phy support for Broadcom Northstar2 SoCs.  This driver uses the
interface from the iproc mdio mux driver to enable the devices
respective phys.

Signed-off-by: Jon Mason <jonmason at broadcom.com>
Signed-off-by: Pramod Kumar <pramod.kumar at broadcom.com>
---
 drivers/phy/Kconfig            |   8 +++
 drivers/phy/Makefile           |   1 +
 drivers/phy/phy-bcm-ns2-pcie.c | 115 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 124 insertions(+)
 create mode 100644 drivers/phy/phy-bcm-ns2-pcie.c

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 26566db..5ff60b2 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -421,4 +421,12 @@ config PHY_CYGNUS_PCIE
 	  Enable this to support the Broadcom Cygnus PCIe PHY.
 	  If unsure, say N.
 
+config PHY_NS2_PCIE
+	tristate "Broadcom Northstar2 PCIe PHY driver"
+	depends on OF && MDIO_BUS_MUX_BCM_IPROC
+	select GENERIC_PHY
+	default ARCH_BCM_IPROC
+	help
+	  Enable this to support the Broadcom Northstar2 PCIe PHY.
+	  If unsure, say N.
 endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 24596a9..77d51ff 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -52,3 +52,4 @@ obj-$(CONFIG_PHY_TUSB1210)		+= phy-tusb1210.o
 obj-$(CONFIG_PHY_BRCMSTB_SATA)		+= phy-brcmstb-sata.o
 obj-$(CONFIG_PHY_PISTACHIO_USB)		+= phy-pistachio-usb.o
 obj-$(CONFIG_PHY_CYGNUS_PCIE)		+= phy-bcm-cygnus-pcie.o
+obj-$(CONFIG_PHY_NS2_PCIE)		+= phy-bcm-ns2-pcie.o
diff --git a/drivers/phy/phy-bcm-ns2-pcie.c b/drivers/phy/phy-bcm-ns2-pcie.c
new file mode 100644
index 0000000..65c3870
--- /dev/null
+++ b/drivers/phy/phy-bcm-ns2-pcie.c
@@ -0,0 +1,115 @@
+/*
+ * Copyright (C) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of_mdio.h>
+#include <linux/mdio.h>
+#include <linux/phy.h>
+#include <linux/phy/phy.h>
+
+struct ns2_pci_phy {
+	struct mdio_device *mdiodev;
+	struct phy *phy;
+};
+
+#define BLK_ADDR_REG_OFFSET	0x1f
+#define PLL_AFE1_100MHZ_BLK	0x2100
+#define PLL_CLK_AMP_OFFSET	0x03
+#define PLL_CLK_AMP_2P05V	0x2b18
+
+static int ns2_pci_phy_init(struct phy *p)
+{
+	struct ns2_pci_phy *phy = phy_get_drvdata(p);
+	int rc;
+
+	/* select the AFE 100MHz block page */
+	rc = mdiobus_write(phy->mdiodev->bus, phy->mdiodev->addr,
+			   BLK_ADDR_REG_OFFSET, PLL_AFE1_100MHZ_BLK);
+	if (rc)
+		goto err;
+
+	/* set the 100 MHz reference clock amplitude to 2.05 v */
+	rc = mdiobus_write(phy->mdiodev->bus, phy->mdiodev->addr,
+			   PLL_CLK_AMP_OFFSET, PLL_CLK_AMP_2P05V);
+	if (rc)
+		goto err;
+
+	return 0;
+
+err:
+	dev_err(&phy->mdiodev->dev, "Error %d writing to phy\n", rc);
+	return rc;
+}
+
+static struct phy_ops ns2_pci_phy_ops = {
+	.init = ns2_pci_phy_init,
+};
+
+static int ns2_pci_phy_probe(struct mdio_device *mdiodev)
+{
+	struct device *dev = &mdiodev->dev;
+	struct phy_provider *provider;
+	struct ns2_pci_phy *p;
+	struct phy *phy;
+
+	phy = devm_phy_create(dev, dev->of_node, &ns2_pci_phy_ops);
+	if (IS_ERR_OR_NULL(phy)) {
+		dev_err(dev, "failed to create Phy\n");
+		return PTR_ERR(phy);
+	}
+
+	p = devm_kmalloc(dev, sizeof(struct ns2_pci_phy),
+			 GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	p->mdiodev = mdiodev;
+	dev_set_drvdata(dev, p);
+
+	p->phy = phy;
+	phy_set_drvdata(phy, p);
+
+	provider = devm_of_phy_provider_register(&phy->dev,
+						 of_phy_simple_xlate);
+	if (IS_ERR(provider)) {
+		dev_err(dev, "failed to register Phy provider\n");
+		return PTR_ERR(provider);
+	}
+
+	dev_info(dev, "%s PHY registered\n", dev_name(dev));
+
+	return 0;
+}
+
+static const struct of_device_id ns2_pci_phy_of_match[] = {
+	{ .compatible = "brcm,ns2-pcie-phy", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, ns2_pci_phy_of_match);
+
+static struct mdio_driver ns2_pci_phy_driver = {
+	.mdiodrv = {
+		.driver = {
+			.name = "phy-bcm-ns2-pci",
+			.of_match_table = ns2_pci_phy_of_match,
+		},
+	},
+	.probe = ns2_pci_phy_probe,
+};
+mdio_module_driver(ns2_pci_phy_driver);
+
+MODULE_AUTHOR("Broadcom");
+MODULE_DESCRIPTION("Broadcom Northstar2 PCI Phy driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:phy-bcm-ns2-pci");
-- 
1.9.1