[PATCH v3 2/2] i2c: qup: support SMBus block read
Christ, Austin
austinwc at codeaurora.org
Thu May 26 08:42:46 PDT 2016
Hello,
On 5/25/2016 3:31 AM, rajeev kumar wrote:
> On Fri, May 20, 2016 at 3:14 AM, Austin Christ <austinwc at codeaurora.org> wrote:
>> From: Naveen Kaje <nkaje at codeaurora.org>
>>
>> I2C QUP driver relies on SMBus emulation support from the framework.
>> To handle SMBus block reads, the driver should check I2C_M_RECV_LEN
>> flag and should read the first byte received as the message length.
>>
>> The driver configures the QUP hardware to read one byte. Once the
>> message length is known from this byte, the QUP hardware is configured
>> to read the rest.
>>
>> Signed-off-by: Naveen Kaje <nkaje at codeaurora.org>
>> Signed-off-by: Austin Christ <austinwc at codeaurora.org>
>> ---
>> drivers/i2c/busses/i2c-qup.c | 68 ++++++++++++++++++++++++++++++++++++++++++--
>> 1 file changed, 65 insertions(+), 3 deletions(-)
>>
>> Changes:
>> - v3:
>> - clean up redundant checks
>> - use constant instead of variable for smbus length field
>> - v2:
>> - rework the smbus block read and break into separate function
>>
>> diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
>> index ea6ca5f..9fbed83 100644
>> --- a/drivers/i2c/busses/i2c-qup.c
>> +++ b/drivers/i2c/busses/i2c-qup.c
>> @@ -517,6 +517,33 @@ static int qup_i2c_get_data_len(struct qup_i2c_dev *qup)
>> return data_len;
>> }
>>
>> +static bool qup_i2c_check_msg_len(struct i2c_msg *msg)
>> +{
>> + return ((msg->flags & I2C_M_RD) && (msg->flags & I2C_M_RECV_LEN));
>> +}
>> +
>> +static int qup_i2c_set_tags_smb(u16 addr, u8 *tags, struct qup_i2c_dev *qup,
>> + struct i2c_msg *msg)
>> +{
>> + int len = 0;
>> +
>> + if (msg->len > 1) {
>> + tags[len++] = QUP_TAG_V2_DATARD_STOP;
>> + tags[len++] = qup_i2c_get_data_len(qup) - 1;
>> + } else {
>> + tags[len++] = QUP_TAG_V2_START;
>> + tags[len++] = addr & 0xff;
>> +
>> + if (msg->flags & I2C_M_TEN)
>> + tags[len++] = addr >> 8;
>> +
>> + tags[len++] = QUP_TAG_V2_DATARD;
>> + /* Read 1 byte indicating the length of the SMBus message */
>> + tags[len++] = 1;
>> + }
>> + return len;
>> +}
>> +
>> static int qup_i2c_set_tags(u8 *tags, struct qup_i2c_dev *qup,
>> struct i2c_msg *msg, int is_dma)
>> {
>> @@ -526,6 +553,10 @@ static int qup_i2c_set_tags(u8 *tags, struct qup_i2c_dev *qup,
>>
>> int last = (qup->blk.pos == (qup->blk.count - 1)) && (qup->is_last);
>>
>> + /* Handle tags for SMBus block read */
>> + if (qup_i2c_check_msg_len(msg))
>> + return qup_i2c_set_tags_smb(addr, tags, qup, msg);
>> +
>> if (qup->blk.pos == 0) {
>> tags[len++] = QUP_TAG_V2_START;
>> tags[len++] = addr & 0xff;
>> @@ -1065,9 +1096,17 @@ static int qup_i2c_read_fifo_v2(struct qup_i2c_dev *qup,
>> struct i2c_msg *msg)
>> {
>> u32 val;
>> - int idx, pos = 0, ret = 0, total;
>> + int idx, pos = 0, ret = 0, total, msg_offset = 0;
>>
>> + /*
>> + * If the message length is already read in
>> + * the first byte of the buffer, account for
>> + * that by setting the offset
>> + */
>> + if (qup_i2c_check_msg_len(msg) && (msg->len > 1))
>> + msg_offset = 1;
>> total = qup_i2c_get_data_len(qup);
>> + total -= msg_offset;
>>
>> /* 2 extra bytes for read tags */
>> while (pos < (total + 2)) {
>> @@ -1087,8 +1126,8 @@ static int qup_i2c_read_fifo_v2(struct qup_i2c_dev *qup,
>>
>> if (pos >= (total + 2))
>> goto out;
>> -
>> - msg->buf[qup->pos++] = val & 0xff;
>> + msg->buf[qup->pos + msg_offset] = val & 0xff;
>> + qup->pos++;
>> }
>> }
>>
>> @@ -1128,6 +1167,24 @@ static int qup_i2c_read_one_v2(struct qup_i2c_dev *qup, struct i2c_msg *msg)
>> goto err;
>>
>> qup->blk.pos++;
>> +
>> + /* Handle SMBus block read length */
>> + if (qup_i2c_check_msg_len(msg) && (msg->len == 1)) {
>> + if (msg->buf[0] > I2C_SMBUS_BLOCK_MAX) {
>> + ret = -EPROTO;
>> + goto err;
>> + }
>> + msg->len += msg->buf[0];
>> + qup->pos = 0;
>> + qup_i2c_set_read_mode_v2(qup, msg->len);
>> + ret = qup_i2c_issue_xfer_v2(qup, msg);
>> + if (ret)
>> + goto err;
>> + ret = qup_i2c_wait_for_complete(qup, msg);
>> + if (ret)
>> + goto err;
>> + qup_i2c_set_blk_data(qup, msg);
>> + }
>> } while (qup->blk.pos < qup->blk.count);
>>
>> err:
>> @@ -1210,6 +1267,11 @@ static int qup_i2c_xfer(struct i2c_adapter *adap,
>> goto out;
>> }
>>
>> + if (qup_i2c_check_msg_len(&msgs[idx])) {
>> + ret = -EOPNOTSUPP;
> Could you please rethink on this return value ? It should not be "EOPNOTSUPP"
>
> ~Rajeev
This will be replaced with "EINVAL" in v4 patches.
>
>> + goto out;
>> + }
>> +
>> if (msgs[idx].flags & I2C_M_RD)
>> ret = qup_i2c_read_one(qup, &msgs[idx]);
>> else
>> --
>> Qualcomm Innovation Center, Inc.
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
>> a Linux Foundation Collaborative Project.
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
Thanks,
Austin
More information about the linux-arm-kernel
mailing list