[PATCH 02/11] drivers: clk: st: Add clock propagation for audio clocks

[Rob Herring]

On Thu, May 26, 2016 at 4:49 AM, Gabriel Fernandez
<gabriel.fernandez at linaro.org> wrote:
> On 25 May 2016 at 19:24, Rob Herring <robh at kernel.org> wrote:
>>
>> On Wed, May 18, 2016 at 10:41:23AM +0200, Gabriel Fernandez wrote:
>> > This patch allows fine tuning of the quads FS for audio clocks
>> > accuracy.
>> >
>> > Signed-off-by: Olivier Bideau <olivier.bideau at st.com>
>> > Signed-off-by: Gabriel Fernandez <gabriel.fernandez at linaro.org>
>> > ---
>> >  .../devicetree/bindings/clock/st/st,flexgen.txt    |  1 +
>> >  drivers/clk/st/clk-flexgen.c                       | 24 ++++++++++++++++++++++
>> >  2 files changed, 25 insertions(+)
>> >
>> > diff --git a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
>> > index b7ee5c7..15b33c7 100644
>> > --- a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
>> > +++ b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
>> > @@ -60,6 +60,7 @@ This binding uses the common clock binding[2].
>> >  Required properties:
>> >  - compatible : shall be:
>> >    "st,flexgen"
>> > +  "st,stih407-clkgend0", "st,flexgen" (enable clock propagation on parent)
>>
>> What do "d0" and "d2" refer to?
>>
>> This seems to indicate you have too much clock detail in the DT (with
>> individual clocks described) or not enough with genericish compatible
>> strings. What happens for the mext clock you need to adjust the flags
>> on? You should be able to make these adjustments without DT updates.
>> Perhaps you need a wider fixing of clock compatible strings.
>>
>> Rob
>
> Sorry i sent my response in html...
>
> Hi Rob,
>
> Thanks for reviewing.
>
> Can i remove
> "
> st,stih407-clkgend0" & "
> st,stih407-clkgend2" compatible strings and add proprieties instead ?
> I only need to activate 2 features and then we can keep generic
> compatible strings.

That is no different and suffers the same point I raised. It requires
updating the DT for any clock configuration change or enhancement.

Rob