[PATCH 2/2] ARM: dts: Add async-bridge clock to MFC power domain for Exynos5420

[Krzysztof Kozlowski]

On 05/24/2016 07:41 PM, Javier Martinez Canillas wrote:
> The MFC IP is also inter-connected by an Async-Bridge so the CLK_ACLK333
> has to be ungated during a power domain switch. Trying to do it when the
> clock is gated will fail and lead to an imprecise external abort error
> when the driver tries to access the MFC registers with the PD disabled.
> 
> For example, if the s5p-mfc module is removed and the MFC PD turned off:
> 
> [  186.835606] Power domain power-domain at 10044060 disable failed
> [  186.835671] s5p-mfc 11000000.codec: Removing 11000000.codec
> [  186.837670] Power domain power-domain at 10044060 disable failed
> 
> And when the module is inserted again:
> 
> [ 2395.176956] s5p_mfc_wait_for_done_dev:34: Interrupt (dev->int_type:0, command:12) timed out
> [ 2395.177031] s5p_mfc_init_hw:272: Failed to load firmware
> [ 2395.177384] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
> [ 2395.177441] pgd = ec3b4000
> [ 2395.177467] [00000000] *pgd=00000000
> [ 2395.177507] Internal error: : 1406 [#1] PREEMPT SMP ARM
> [ 2395.177550] Modules linked in: s5p_mfc mwifiex_sdio mwifiex uvcvideo s5p_jpeg v4l2_mem2mem videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops videobuf2_v4l2 videobuf2_core v4l2_common videodev media [last unloaded: s5p_mfc]
> [ 2395.177774] CPU: 1 PID: 2382 Comm: v4l_id Tainted: G        W       4.6.0-rc6-next-20160502-00010-g7730dc64d2c1-dirty #179
> [ 2395.177857] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
> [ 2395.177906] task: ed275500 ti: e6c8c000 task.ti: e6c8c000
> [ 2395.177996] PC is at s5p_mfc_reset+0x1c4/0x284 [s5p_mfc]
> [ 2395.178057] LR is at s5p_mfc_reset+0x1a4/0x284 [s5p_mfc]
> 
> This patch fixes this issue by adding the CLK_ACLK333 as an Async-Bridge
> clock for the MFC power domain, so the PD configuration works properly.
> 
> Signed-off-by: Javier Martinez Canillas <javier at osg.samsung.com>
> 
> ---
> 
>  arch/arm/boot/dts/exynos5420.dtsi | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)

Indeed patch #1 is not a hard dependency here because there are no other
asb clocks. It is entirely obvious but works fine.

Reviewed-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>

Unless all other patches are meant to current fixes cycle (and/or
cc-stable), I do not plan to apply it now. I'll take it for v4.8, because:
1. Your previous patches are needed. Without them bind/unbind won't work.
2. This is not reproducible in a regular driver operation.
3. It needs clock change to actually be useful.

Is it okay?

Best regards,
Krzysztof

> 
> diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
> index 4c8523471c65..f3e9d873633e 100644
> --- a/arch/arm/boot/dts/exynos5420.dtsi
> +++ b/arch/arm/boot/dts/exynos5420.dtsi
> @@ -313,8 +313,9 @@
>  	mfc_pd: power-domain at 10044060 {
>  		compatible = "samsung,exynos4210-pd";
>  		reg = <0x10044060 0x20>;
> -		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK333>;
> -		clock-names = "oscclk", "clk0";
> +		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK333>,
> +			 <&clock CLK_ACLK333>;
> +		clock-names = "oscclk", "clk0","asb0";
>  		#power-domain-cells = <0>;
>  	};
>  
>