[PATCH v7 11/15] acpi, numa: Move acpi_numa_memory_affinity_init() to drivers/acpi/numa.c
David Daney
ddaney.cavm at gmail.com
Tue May 24 15:35:41 PDT 2016
From: Hanjun Guo <hanjun.guo at linaro.org>
acpi_numa_memory_affinity_init() will be reused by arm64. Move it to
drivers/acpi/numa.c to facilitate reuse.
No code change.
Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
Signed-off-by: Robert Richter <rrichter at cavium.com>
Signed-off-by: David Daney <david.daney at cavium.com>
---
arch/x86/mm/srat.c | 57 --------------------------------------------------
drivers/acpi/numa.c | 60 +++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 60 insertions(+), 57 deletions(-)
diff --git a/arch/x86/mm/srat.c b/arch/x86/mm/srat.c
index 30460f5..b1ecff4 100644
--- a/arch/x86/mm/srat.c
+++ b/arch/x86/mm/srat.c
@@ -15,8 +15,6 @@
#include <linux/bitmap.h>
#include <linux/module.h>
#include <linux/topology.h>
-#include <linux/bootmem.h>
-#include <linux/memblock.h>
#include <linux/mm.h>
#include <asm/proto.h>
#include <asm/numa.h>
@@ -104,61 +102,6 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
pxm, apic_id, node);
}
-/* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
-int __init
-acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
-{
- u64 start, end;
- u32 hotpluggable;
- int node, pxm;
-
- if (srat_disabled())
- goto out_err;
- if (ma->header.length != sizeof(struct acpi_srat_mem_affinity))
- goto out_err_bad_srat;
- if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0)
- goto out_err;
- hotpluggable = ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE;
- if (hotpluggable && !IS_ENABLED(CONFIG_MEMORY_HOTPLUG))
- goto out_err;
-
- start = ma->base_address;
- end = start + ma->length;
- pxm = ma->proximity_domain;
- if (acpi_srat_revision <= 1)
- pxm &= 0xff;
-
- node = acpi_map_pxm_to_node(pxm);
- if (node < 0) {
- printk(KERN_ERR "SRAT: Too many proximity domains.\n");
- goto out_err_bad_srat;
- }
-
- if (numa_add_memblk(node, start, end) < 0)
- goto out_err_bad_srat;
-
- node_set(node, numa_nodes_parsed);
-
- pr_info("SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]%s%s\n",
- node, pxm,
- (unsigned long long) start, (unsigned long long) end - 1,
- hotpluggable ? " hotplug" : "",
- ma->flags & ACPI_SRAT_MEM_NON_VOLATILE ? " non-volatile" : "");
-
- /* Mark hotplug range in memblock. */
- if (hotpluggable && memblock_mark_hotplug(start, ma->length))
- pr_warn("SRAT: Failed to mark hotplug range [mem %#010Lx-%#010Lx] in memblock\n",
- (unsigned long long)start, (unsigned long long)end - 1);
-
- max_possible_pfn = max(max_possible_pfn, PFN_UP(end - 1));
-
- return 0;
-out_err_bad_srat:
- bad_srat();
-out_err:
- return -EINVAL;
-}
-
int __init x86_acpi_numa_init(void)
{
int ret;
diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c
index af0c8d5..811f90a 100644
--- a/drivers/acpi/numa.c
+++ b/drivers/acpi/numa.c
@@ -27,6 +27,8 @@
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/acpi.h>
+#include <linux/bootmem.h>
+#include <linux/memblock.h>
#include <linux/numa.h>
#include <linux/nodemask.h>
#include <linux/topology.h>
@@ -236,6 +238,64 @@ void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
}
}
}
+
+/*
+ * Default callback for parsing of the Proximity Domain <-> Memory
+ * Area mappings
+ */
+int __init
+acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
+{
+ u64 start, end;
+ u32 hotpluggable;
+ int node, pxm;
+
+ if (srat_disabled())
+ goto out_err;
+ if (ma->header.length != sizeof(struct acpi_srat_mem_affinity))
+ goto out_err_bad_srat;
+ if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0)
+ goto out_err;
+ hotpluggable = ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE;
+ if (hotpluggable && !IS_ENABLED(CONFIG_MEMORY_HOTPLUG))
+ goto out_err;
+
+ start = ma->base_address;
+ end = start + ma->length;
+ pxm = ma->proximity_domain;
+ if (acpi_srat_revision <= 1)
+ pxm &= 0xff;
+
+ node = acpi_map_pxm_to_node(pxm);
+ if (node < 0) {
+ printk(KERN_ERR "SRAT: Too many proximity domains.\n");
+ goto out_err_bad_srat;
+ }
+
+ if (numa_add_memblk(node, start, end) < 0)
+ goto out_err_bad_srat;
+
+ node_set(node, numa_nodes_parsed);
+
+ pr_info("SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]%s%s\n",
+ node, pxm,
+ (unsigned long long) start, (unsigned long long) end - 1,
+ hotpluggable ? " hotplug" : "",
+ ma->flags & ACPI_SRAT_MEM_NON_VOLATILE ? " non-volatile" : "");
+
+ /* Mark hotplug range in memblock. */
+ if (hotpluggable && memblock_mark_hotplug(start, ma->length))
+ pr_warn("SRAT: Failed to mark hotplug range [mem %#010Lx-%#010Lx] in memblock\n",
+ (unsigned long long)start, (unsigned long long)end - 1);
+
+ max_possible_pfn = max(max_possible_pfn, PFN_UP(end - 1));
+
+ return 0;
+out_err_bad_srat:
+ bad_srat();
+out_err:
+ return -EINVAL;
+}
#endif /* defined(CONFIG_X86) || defined (CONFIG_ARM64) */
static int __init acpi_parse_slit(struct acpi_table_header *table)
--
1.7.11.7
More information about the linux-arm-kernel
mailing list