[PATCH v7 2/4] CMDQ: Mediatek CMDQ driver
CK Hu
ck.hu at mediatek.com
Mon May 23 20:05:59 PDT 2016
Hi, HS:
Some comments below.
On Mon, 2016-05-23 at 20:23 +0800, HS Liao wrote:
> This patch is first version of Mediatek Command Queue(CMDQ) driver. The
> CMDQ is used to help read/write registers with critical time limitation,
> such as updating display configuration during the vblank. It controls
> Global Command Engine (GCE) hardware to achieve this requirement.
> Currently, CMDQ only supports display related hardwares, but we expect
> it can be extended to other hardwares for future requirements.
>
> Signed-off-by: HS Liao <hs.liao at mediatek.com>
> Signed-off-by: CK Hu <ck.hu at mediatek.com>
> ---
> drivers/soc/mediatek/Kconfig | 10 +
> drivers/soc/mediatek/Makefile | 1 +
> drivers/soc/mediatek/mtk-cmdq.c | 904 ++++++++++++++++++++++++++++++++++++++++
> include/soc/mediatek/cmdq.h | 197 +++++++++
> 4 files changed, 1112 insertions(+)
> create mode 100644 drivers/soc/mediatek/mtk-cmdq.c
> create mode 100644 include/soc/mediatek/cmdq.h
>
> diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
> index 0a4ea80..c4ad75c 100644
> --- a/drivers/soc/mediatek/Kconfig
> +++ b/drivers/soc/mediatek/Kconfig
> @@ -1,6 +1,16 @@
> #
> # MediaTek SoC drivers
> #
> +config MTK_CMDQ
> + bool "MediaTek CMDQ Support"
> + depends on ARCH_MEDIATEK || COMPILE_TEST
> + select MTK_INFRACFG
> + help
> + Say yes here to add support for the MediaTek Command Queue (CMDQ)
> + driver. The CMDQ is used to help read/write registers with critical
> + time limitation, such as updating display configuration during the
> + vblank.
> +
> config MTK_INFRACFG
> bool "MediaTek INFRACFG Support"
> depends on ARCH_MEDIATEK || COMPILE_TEST
> diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
> index 12998b0..f7397ef 100644
> --- a/drivers/soc/mediatek/Makefile
> +++ b/drivers/soc/mediatek/Makefile
> @@ -1,3 +1,4 @@
> +obj-$(CONFIG_MTK_CMDQ) += mtk-cmdq.o
> obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o
> obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
> obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
> diff --git a/drivers/soc/mediatek/mtk-cmdq.c b/drivers/soc/mediatek/mtk-cmdq.c
> new file mode 100644
> index 0000000..f8c5d02
> --- /dev/null
> +++ b/drivers/soc/mediatek/mtk-cmdq.c
> @@ -0,0 +1,904 @@
> +/*
> + * Copyright (c) 2015 MediaTek Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/errno.h>
> +#include <linux/interrupt.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/kthread.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
> +#include <linux/suspend.h>
> +#include <linux/workqueue.h>
> +#include <soc/mediatek/cmdq.h>
> +
> +#define CMDQ_INITIAL_CMD_BLOCK_SIZE PAGE_SIZE
> +#define CMDQ_INST_SIZE 8 /* instruction is 64-bit */
> +
> +#define CMDQ_DEFAULT_TIMEOUT_MS 1000
> +
> +#define CMDQ_DRIVER_DEVICE_NAME "mtk_cmdq"
> +#define CMDQ_CLK_NAME "gce"
> +
> +#define CMDQ_CURR_IRQ_STATUS 0x010
> +#define CMDQ_THR_SLOT_CYCLES 0x030
> +
> +#define CMDQ_THR_BASE 0x100
> +#define CMDQ_THR_SHIFT 0x080
> +#define CMDQ_THR_WARM_RESET 0x00
> +#define CMDQ_THR_ENABLE_TASK 0x04
> +#define CMDQ_THR_SUSPEND_TASK 0x08
> +#define CMDQ_THR_CURR_STATUS 0x0c
> +#define CMDQ_THR_IRQ_STATUS 0x10
> +#define CMDQ_THR_IRQ_ENABLE 0x14
> +#define CMDQ_THR_CURR_ADDR 0x20
> +#define CMDQ_THR_END_ADDR 0x24
> +#define CMDQ_THR_CFG 0x40
> +
> +#define CMDQ_IRQ_MASK 0xffff
> +
> +#define CMDQ_THR_ENABLED 0x1
> +#define CMDQ_THR_DISABLED 0x0
> +#define CMDQ_THR_SUSPEND 0x1
> +#define CMDQ_THR_RESUME 0x0
> +#define CMDQ_THR_STATUS_SUSPENDED BIT(1)
> +#define CMDQ_THR_DO_WARM_RESET BIT(0)
> +#define CMDQ_THR_ACTIVE_SLOT_CYCLES 0x3200
> +#define CMDQ_THR_PRIORITY 3
> +#define CMDQ_THR_IRQ_DONE 0x1
> +#define CMDQ_THR_IRQ_ERROR 0x12
> +#define CMDQ_THR_IRQ_EN 0x13 /* done + error */
> +#define CMDQ_THR_IRQ_MASK 0x13
> +#define CMDQ_THR_EXECUTING BIT(31)
> +
> +#define CMDQ_ARG_A_WRITE_MASK 0xffff
> +#define CMDQ_SUBSYS_MASK 0x1f
> +
> +#define CMDQ_OP_CODE_SHIFT 24
> +#define CMDQ_SUBSYS_SHIFT 16
> +
> +#define CMDQ_JUMP_BY_OFFSET 0x10000000
> +#define CMDQ_JUMP_BY_PA 0x10000001
> +#define CMDQ_JUMP_PASS CMDQ_INST_SIZE
> +
> +#define CMDQ_WFE_UPDATE BIT(31)
> +#define CMDQ_WFE_WAIT BIT(15)
> +#define CMDQ_WFE_WAIT_VALUE 0x1
> +
> +#define CMDQ_EOC_IRQ_EN BIT(0)
> +
> +#define CMDQ_ENABLE_MASK BIT(0)
> +
> +#define CMDQ_OP_CODE_MASK 0xff000000
> +
> +enum cmdq_thread_index {
> + CMDQ_THR_DISP_MAIN_IDX, /* main */
> + CMDQ_THR_DISP_SUB_IDX, /* sub */
> + CMDQ_THR_DISP_MISC_IDX, /* misc */
> + CMDQ_THR_MAX_COUNT, /* max */
> +};
> +
> +/*
> + * CMDQ_CODE_MOVE:
> + * move value into internal register as mask
> + * format: op mask
> + * CMDQ_CODE_WRITE:
> + * write value into target register
> + * format: op subsys address value
> + * CMDQ_CODE_JUMP:
> + * jump by offset
> + * format: op offset
> + * CMDQ_CODE_WFE:
> + * wait for event and clear
> + * it is just clear if no wait
> + * format: [wait] op event update:1 to_wait:1 wait:1
> + * [clear] op event update:1 to_wait:0 wait:0
> + * CMDQ_CODE_EOC:
> + * end of command
> + * format: op irq_flag
> + */
> +enum cmdq_code {
> + CMDQ_CODE_MOVE = 0x02,
> + CMDQ_CODE_WRITE = 0x04,
> + CMDQ_CODE_JUMP = 0x10,
> + CMDQ_CODE_WFE = 0x20,
> + CMDQ_CODE_EOC = 0x40,
> +};
> +
> +enum cmdq_task_state {
> + TASK_STATE_BUSY, /* task running on a thread */
> + TASK_STATE_ERROR, /* task execution error */
> + TASK_STATE_DONE, /* task finished */
> +};
> +
> +struct cmdq_task_cb {
> + cmdq_async_flush_cb cb;
> + void *data;
> +};
> +
> +struct cmdq_thread {
> + void __iomem *base;
> + struct list_head task_busy_list;
> + wait_queue_head_t wait_queue; /* wait task done */
> +};
> +
> +
> +struct cmdq_task {
> + struct cmdq *cmdq;
> + struct list_head list_entry;
> + enum cmdq_task_state task_state;
> + void *va_base; /* va */
It's obviously that va_base is va, so the comment is redundant.
> + dma_addr_t mva_base; /* pa */
> + u64 engine_flag;
> + size_t command_size;
> + u32 num_cmd;
> + struct cmdq_thread *thread;
> + struct cmdq_task_cb cb;
> + struct work_struct release_work;
> +};
> +
> +struct cmdq {
> + struct device *dev;
> + void __iomem *base;
> + u32 irq;
> + struct workqueue_struct *task_release_wq;
> + struct cmdq_thread thread[CMDQ_THR_MAX_COUNT];
> + spinlock_t exec_lock; /* for exec task */
> + struct clk *clock;
> +};
> +
> +struct cmdq_subsys {
> + u32 base_addr;
> + int id;
> +};
> +
> +static const struct cmdq_subsys g_subsys[] = {
> + {0x1400, 1},
> + {0x1401, 2},
> + {0x1402, 3},
> +};
> +
> +static int cmdq_subsys_base_addr_to_id(u32 base_addr)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(g_subsys); i++)
> + if (g_subsys[i].base_addr == base_addr)
> + return g_subsys[i].id;
> + return -EFAULT;
> +}
> +
> +static int cmdq_eng_get_thread(u64 flag)
> +{
> + if (flag & BIT_ULL(CMDQ_ENG_DISP_DSI0))
> + return CMDQ_THR_DISP_MAIN_IDX;
> + else if (flag & BIT_ULL(CMDQ_ENG_DISP_DPI0))
> + return CMDQ_THR_DISP_SUB_IDX;
> + else
> + return CMDQ_THR_DISP_MISC_IDX;
> +}
> +
> +static void cmdq_task_release(struct cmdq_task *task)
> +{
> + struct cmdq *cmdq = task->cmdq;
> +
> + dma_free_coherent(cmdq->dev, task->command_size, task->va_base,
> + task->mva_base);
> + kfree(task);
> +}
> +
> +static struct cmdq_task *cmdq_task_acquire(struct cmdq_rec *rec,
> + struct cmdq_task_cb cb)
> +{
> + struct cmdq *cmdq = rec->cmdq;
> + struct device *dev = cmdq->dev;
> + struct cmdq_task *task;
> +
> + task = kzalloc(sizeof(*task), GFP_KERNEL);
> + INIT_LIST_HEAD(&task->list_entry);
> + task->va_base = dma_alloc_coherent(dev, rec->command_size,
> + &task->mva_base, GFP_KERNEL);
> + if (!task->va_base) {
> + dev_err(dev, "allocate command buffer failed\n");
> + kfree(task);
> + return NULL;
> + }
> +
> + task->cmdq = cmdq;
> + task->command_size = rec->command_size;
> + task->engine_flag = rec->engine_flag;
> + task->task_state = TASK_STATE_BUSY;
> + task->cb = cb;
> + memcpy(task->va_base, rec->buf, rec->command_size);
> + task->num_cmd = task->command_size / sizeof(u64);
Already define CMDQ_INST_SIZE, so use it and the readability is better.
> + return task;
> +}
> +
> +static void cmdq_thread_writel(struct cmdq_thread *thread, u32 value,
> + u32 offset)
> +{
> + writel(value, thread->base + offset);
> +}
> +
> +static u32 cmdq_thread_readl(struct cmdq_thread *thread, u32 offset)
> +{
> + return readl(thread->base + offset);
> +}
> +
> +static int cmdq_thread_suspend(struct cmdq *cmdq, struct cmdq_thread *thread)
> +{
> + u32 enabled;
> + u32 status;
> +
> + cmdq_thread_writel(thread, CMDQ_THR_SUSPEND, CMDQ_THR_SUSPEND_TASK);
> +
> + /* If already disabled, treat as suspended successful. */
> + enabled = cmdq_thread_readl(thread, CMDQ_THR_ENABLE_TASK);
> + if (!(enabled & CMDQ_THR_ENABLED))
> + return 0;
> +
> + if (readl_poll_timeout_atomic(thread->base + CMDQ_THR_CURR_STATUS,
> + status,
> + status & CMDQ_THR_STATUS_SUSPENDED,
> + 0, 10)) {
> + dev_err(cmdq->dev, "Suspend HW thread 0x%x failed\n",
> + (u32)(thread->base - cmdq->base));
> + return -EFAULT;
> + }
> +
> + return 0;
> +}
> +
> +static void cmdq_thread_resume(struct cmdq_thread *thread)
> +{
> + cmdq_thread_writel(thread, CMDQ_THR_RESUME, CMDQ_THR_SUSPEND_TASK);
> +}
> +
> +static int cmdq_thread_reset(struct cmdq *cmdq, struct cmdq_thread *thread)
> +{
> + void __iomem *gce_base = cmdq->base;
> + u32 warm_reset;
> +
> + cmdq_thread_writel(thread, CMDQ_THR_DO_WARM_RESET, CMDQ_THR_WARM_RESET);
> + if (readl_poll_timeout_atomic(thread->base + CMDQ_THR_WARM_RESET,
> + warm_reset,
> + !(warm_reset & CMDQ_THR_DO_WARM_RESET),
> + 0, 10)) {
> + dev_err(cmdq->dev, "Reset HW thread 0x%x failed\n",
> + (u32)(thread->base - cmdq->base));
> + return -EFAULT;
> + }
> + writel(CMDQ_THR_ACTIVE_SLOT_CYCLES, gce_base + CMDQ_THR_SLOT_CYCLES);
> + return 0;
> +}
> +
> +static void cmdq_thread_disable(struct cmdq *cmdq, struct cmdq_thread *thread)
> +{
> + cmdq_thread_reset(cmdq, thread);
> + cmdq_thread_writel(thread, CMDQ_THR_DISABLED, CMDQ_THR_ENABLE_TASK);
> +}
> +
> +/* notify GCE to re-fetch commands by setting HW thread PC */
> +static void cmdq_thread_invalidate_fetched_data(struct cmdq_thread *thread)
> +{
> + cmdq_thread_writel(thread,
> + cmdq_thread_readl(thread, CMDQ_THR_CURR_ADDR),
> + CMDQ_THR_CURR_ADDR);
> +}
> +
> +static void cmdq_task_insert_into_thread(struct cmdq_task *task)
> +{
> + struct cmdq_thread *thread = task->thread;
> + struct cmdq_task *prev_task = list_last_entry(
> + &thread->task_busy_list, typeof(*task), list_entry);
> + u64 *prev_task_base = prev_task->va_base;
> +
> + /* let previous task jump to this task */
> + prev_task_base[prev_task->num_cmd - 1] = (u64)CMDQ_JUMP_BY_PA << 32 |
> + task->mva_base;
> +
> + cmdq_thread_invalidate_fetched_data(thread);
> +}
> +
> +/* we assume tasks in the same display thread are waiting the same event. */
> +static void cmdq_task_remove_wfe(struct cmdq_task *task)
> +{
> + u32 wfe_option = CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE;
> + u32 wfe_op = CMDQ_CODE_WFE << CMDQ_OP_CODE_SHIFT;
> + u32 *base = task->va_base;
> + u32 num_cmd = task->num_cmd << 1;
> + int i;
> +
> + for (i = 0; i < num_cmd; i += 2)
> + if (base[i] == wfe_option &&
> + (base[i + 1] & CMDQ_OP_CODE_MASK) == wfe_op) {
> + base[i] = CMDQ_JUMP_PASS;
> + base[i + 1] = CMDQ_JUMP_BY_OFFSET;
> + }
> +}
> +
> +static void cmdq_task_exec(struct cmdq_task *task, struct cmdq_thread *thread)
> +{
> + struct cmdq *cmdq = task->cmdq;
> + unsigned long flags;
> + unsigned long curr_pa, end_pa;
> +
> + WARN_ON(clk_prepare_enable(cmdq->clock) < 0);
> + spin_lock_irqsave(&cmdq->exec_lock, flags);
> + task->thread = thread;
> + task->task_state = TASK_STATE_BUSY;
Once a task is created, its state is already BUSY, so this assignment is
redundant.
> + if (list_empty(&thread->task_busy_list)) {
> + WARN_ON(cmdq_thread_reset(cmdq, thread) < 0);
> +
> + cmdq_thread_writel(thread, task->mva_base, CMDQ_THR_CURR_ADDR);
> + cmdq_thread_writel(thread, task->mva_base + task->command_size,
> + CMDQ_THR_END_ADDR);
> + cmdq_thread_writel(thread, CMDQ_THR_PRIORITY, CMDQ_THR_CFG);
> + cmdq_thread_writel(thread, CMDQ_THR_IRQ_EN,
> + CMDQ_THR_IRQ_ENABLE);
> +
> + list_move_tail(&task->list_entry,
> + &thread->task_busy_list);
Moving this statement to just before spin_unlock_irqrestore() can reduce
the duplicated code in else part.
> +
> + cmdq_thread_writel(thread, CMDQ_THR_ENABLED,
> + CMDQ_THR_ENABLE_TASK);
> + } else {
> + WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0);
> +
> + /*
> + * check boundary condition
> + * PC = END - 8, EOC is executed
> + * PC = END, all CMDs are executed
> + */
> + curr_pa = cmdq_thread_readl(thread, CMDQ_THR_CURR_ADDR);
> + end_pa = cmdq_thread_readl(thread, CMDQ_THR_END_ADDR);
> + if (curr_pa == end_pa - 8 || curr_pa == end_pa) {
> + /* set to this task directly */
> + cmdq_thread_writel(thread, task->mva_base,
> + CMDQ_THR_CURR_ADDR);
> + } else {
> + cmdq_task_insert_into_thread(task);
> +
> + if (thread == &cmdq->thread[CMDQ_THR_DISP_MAIN_IDX] ||
> + thread == &cmdq->thread[CMDQ_THR_DISP_SUB_IDX])
> + cmdq_task_remove_wfe(task);
> +
> + smp_mb(); /* modify jump before enable thread */
> + }
> +
> + cmdq_thread_writel(thread, task->mva_base + task->command_size,
> + CMDQ_THR_END_ADDR);
> + list_move_tail(&task->list_entry, &thread->task_busy_list);
> + cmdq_thread_resume(thread);
> + }
> + spin_unlock_irqrestore(&cmdq->exec_lock, flags);
> +}
> +
> +static void cmdq_handle_error_done(struct cmdq *cmdq,
> + struct cmdq_thread *thread, bool err)
> +{
> + struct cmdq_task *task, *tmp, *curr_task = NULL;
> + u32 curr_pa;
> + struct cmdq_cb_data cmdq_cb_data;
> +
> + curr_pa = cmdq_thread_readl(thread, CMDQ_THR_CURR_ADDR);
> +
> + list_for_each_entry_safe(task, tmp, &thread->task_busy_list,
> + list_entry) {
> + if (curr_pa >= task->mva_base &&
> + curr_pa < (task->mva_base + task->command_size))
> + curr_task = task;
> + if (task->cb.cb) {
> + cmdq_cb_data.err = curr_task ? err : false;
> + cmdq_cb_data.data = task->cb.data;
> + task->cb.cb(cmdq_cb_data);
> + }
> + task->task_state = (curr_task && err) ? TASK_STATE_ERROR :
> + TASK_STATE_DONE;
> + list_del(&task->list_entry);
> + if (curr_task)
> + break;
> + }
> +
> + wake_up(&thread->wait_queue);
> +}
> +
> +static void cmdq_thread_irq_handler(struct cmdq *cmdq, int tid)
> +{
> + struct cmdq_thread *thread = &cmdq->thread[tid];
> + unsigned long flags = 0L;
> + int value;
> +
> + spin_lock_irqsave(&cmdq->exec_lock, flags);
> +
> + /*
> + * it is possible for another CPU core
> + * to run "release task" right before we acquire the spin lock
> + * and thus reset / disable this HW thread
> + * so we check both the IRQ flag and the enable bit of this thread
> + */
> + value = cmdq_thread_readl(thread, CMDQ_THR_IRQ_STATUS);
> + if (!(value & CMDQ_THR_IRQ_MASK)) {
> + spin_unlock_irqrestore(&cmdq->exec_lock, flags);
> + return;
> + }
If this case happen and just return without clearing irq status, the irq
would keep triggering and system hang up. So just remove this checking
and go down to clear irq status.
> +
> + if (!(cmdq_thread_readl(thread, CMDQ_THR_ENABLE_TASK) &
> + CMDQ_THR_ENABLED)) {
> + spin_unlock_irqrestore(&cmdq->exec_lock, flags);
> + return;
> + }
> +
> + cmdq_thread_writel(thread, ~value, CMDQ_THR_IRQ_STATUS);
> +
> + if (value & CMDQ_THR_IRQ_ERROR)
> + cmdq_handle_error_done(cmdq, thread, true);
> + else if (value & CMDQ_THR_IRQ_DONE)
> + cmdq_handle_error_done(cmdq, thread, false);
These irq status checking and clearing code here is the same as those in
cmdq_task_handle_error_result(). To move the checking and clearing code
into cmdq_handle_error_done() and here just to call
cmdq_handle_error_done(cmdq, thread) would reduce duplicated code.
> +
> + spin_unlock_irqrestore(&cmdq->exec_lock, flags);
> +}
> +
> +static irqreturn_t cmdq_irq_handler(int irq, void *dev)
> +{
> + struct cmdq *cmdq = dev;
> + u32 irq_status;
> + int i;
> +
> + irq_status = readl(cmdq->base + CMDQ_CURR_IRQ_STATUS);
> + irq_status &= CMDQ_IRQ_MASK;
> + irq_status ^= CMDQ_IRQ_MASK;
> +
> + if (!irq_status)
> + return IRQ_NONE;
> +
> + while (irq_status) {
> + i = ffs(irq_status) - 1;
> + irq_status &= ~BIT(i);
> + cmdq_thread_irq_handler(cmdq, i);
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int cmdq_task_handle_error_result(struct cmdq_task *task)
> +{
> + struct cmdq *cmdq = task->cmdq;
> + struct device *dev = cmdq->dev;
> + struct cmdq_thread *thread = task->thread;
> + struct cmdq_task *next_task, *prev_task;
> + u32 irq_flag;
> +
> + /* suspend HW thread to ensure consistency */
> + WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0);
> +
> + /*
> + * Save next_task and prev_task in advance
> + * since cmdq_handle_error_done will remove list_entry.
> + */
> + next_task = prev_task = NULL;
> + if (task->list_entry.next != &thread->task_busy_list)
> + next_task = list_next_entry(task, list_entry);
> + if (task->list_entry.prev != &thread->task_busy_list)
> + prev_task = list_prev_entry(task, list_entry);
> +
> + /*
> + * Although IRQ is disabled, GCE continues to execute.
> + * It may have pending IRQ before HW thread is suspended,
> + * so check this condition again.
> + */
> + irq_flag = cmdq_thread_readl(thread, CMDQ_THR_IRQ_STATUS);
> + if (irq_flag & CMDQ_THR_IRQ_ERROR)
> + cmdq_handle_error_done(cmdq, thread, true);
> + else if (irq_flag & CMDQ_THR_IRQ_DONE)
> + cmdq_handle_error_done(cmdq, thread, false);
> + cmdq_thread_writel(thread, ~irq_flag, CMDQ_THR_IRQ_STATUS);
> +
> + if (task->task_state == TASK_STATE_DONE) {
> + cmdq_thread_resume(thread);
> + return 0;
> + }
> +
> + if (task->task_state == TASK_STATE_ERROR) {
> + dev_err(dev, "task 0x%p error\n", task);
> + if (next_task) /* move to next task */
> + cmdq_thread_writel(thread, next_task->mva_base,
> + CMDQ_THR_CURR_ADDR);
> + cmdq_thread_resume(thread);
> + return -ECANCELED;
> + }
> +
> + /* If task is running, force to remove it. */
> + dev_err(dev, "task 0x%p timeout or killed\n", task);
> +
> + if (task->task_state == TASK_STATE_BUSY)
The state must be BUSY here, so the checking is redundant.
> + task->task_state = TASK_STATE_ERROR;
> +
> + if (prev_task) {
> + u64 *prev_va = prev_task->va_base;
> + u64 *curr_va = task->va_base;
> +
> + /* copy JUMP instruction */
> + prev_va[prev_task->num_cmd - 1] = curr_va[task->num_cmd - 1];
> +
> + cmdq_thread_invalidate_fetched_data(thread);
> + } else if (next_task) { /* move to next task */
> + cmdq_thread_writel(thread, next_task->mva_base,
> + CMDQ_THR_CURR_ADDR);
> + }
> +
> + list_del(&task->list_entry);
> + cmdq_thread_resume(thread);
> +
> + /* call cb here to prevent lock */
> + if (task->cb.cb) {
> + struct cmdq_cb_data cmdq_cb_data;
> +
> + cmdq_cb_data.err = true;
> + cmdq_cb_data.data = task->cb.data;
> + task->cb.cb(cmdq_cb_data);
> + }
> +
> + return -ECANCELED;
> +}
> +
> +static int cmdq_task_wait_and_release(struct cmdq_task *task)
> +{
> + struct cmdq *cmdq = task->cmdq;
> + struct device *dev = cmdq->dev;
> + struct cmdq_thread *thread = task->thread;
> + int wait_q;
> + int err = 0;
> + unsigned long flags;
> +
> + wait_q = wait_event_timeout(thread->wait_queue,
> + task->task_state != TASK_STATE_BUSY,
> + msecs_to_jiffies(CMDQ_DEFAULT_TIMEOUT_MS));
> + if (!wait_q)
> + dev_dbg(dev, "timeout!\n");
Task state may be changed in cmdq_task_handle_error_result() and the
actual time out message print is in cmdq_task_handle_error_result(), so
this print should be removed.
> +
> + spin_lock_irqsave(&cmdq->exec_lock, flags);
> + if (task->task_state != TASK_STATE_DONE)
> + err = cmdq_task_handle_error_result(task);
> + if (list_empty(&thread->task_busy_list))
> + cmdq_thread_disable(cmdq, thread);
> + spin_unlock_irqrestore(&cmdq->exec_lock, flags);
> +
> + /* release regardless of success or not */
> + clk_disable_unprepare(cmdq->clock);
> + cmdq_task_release(task);
> +
> + return err;
> +}
> +
> +static void cmdq_task_wait_release_work(struct work_struct *work_item)
> +{
> + struct cmdq_task *task = container_of(work_item, struct cmdq_task,
> + release_work);
> +
> + cmdq_task_wait_and_release(task);
> +}
> +
> +static void cmdq_task_wait_release_schedule(struct cmdq_task *task)
> +{
> + struct cmdq *cmdq = task->cmdq;
> +
> + INIT_WORK(&task->release_work, cmdq_task_wait_release_work);
> + queue_work(cmdq->task_release_wq, &task->release_work);
> +}
> +
> +static int cmdq_rec_realloc_cmd_buffer(struct cmdq_rec *rec, size_t size)
> +{
> + void *new_buf;
> +
> + new_buf = krealloc(rec->buf, size, GFP_KERNEL | __GFP_ZERO);
> + if (!new_buf)
> + return -ENOMEM;
> + rec->buf = new_buf;
> + rec->buf_size = size;
> + return 0;
> +}
> +
> +struct cmdq_base *cmdq_register_device(struct device *dev)
> +{
> + struct cmdq_base *cmdq_base;
> + struct resource res;
> + int subsys;
> + u32 base;
> +
> + if (of_address_to_resource(dev->of_node, 0, &res))
> + return NULL;
> + base = (u32)res.start;
> +
> + subsys = cmdq_subsys_base_addr_to_id(base >> 16);
> + if (subsys < 0)
> + return NULL;
> +
> + cmdq_base = devm_kmalloc(dev, sizeof(*cmdq_base), GFP_KERNEL);
> + if (!cmdq_base)
> + return NULL;
> + cmdq_base->subsys = subsys;
> + cmdq_base->base = base;
> +
> + return cmdq_base;
> +}
> +EXPORT_SYMBOL(cmdq_register_device);
> +
> +int cmdq_rec_create(struct device *dev, u64 engine_flag,
> + struct cmdq_rec **rec_ptr)
> +{
> + struct cmdq_rec *rec;
> + int err;
> +
> + rec = kzalloc(sizeof(*rec), GFP_KERNEL);
> + if (!rec)
> + return -ENOMEM;
> + rec->cmdq = dev_get_drvdata(dev);
> + rec->engine_flag = engine_flag;
> + err = cmdq_rec_realloc_cmd_buffer(rec, CMDQ_INITIAL_CMD_BLOCK_SIZE);
> + if (err < 0) {
> + kfree(rec);
> + return err;
> + }
> + *rec_ptr = rec;
> + return 0;
> +}
> +EXPORT_SYMBOL(cmdq_rec_create);
> +
> +static int cmdq_rec_append_command(struct cmdq_rec *rec, enum cmdq_code code,
> + u32 arg_a, u32 arg_b)
> +{
> + u64 *cmd_ptr;
> + int err;
> +
> + if (WARN_ON(rec->finalized))
> + return -EBUSY;
> + if (code < CMDQ_CODE_MOVE || code > CMDQ_CODE_EOC)
> + return -EINVAL;
> + if (unlikely(rec->command_size + CMDQ_INST_SIZE > rec->buf_size)) {
> + err = cmdq_rec_realloc_cmd_buffer(rec, rec->buf_size * 2);
> + if (err < 0)
> + return err;
> + }
> + cmd_ptr = rec->buf + rec->command_size;
> + (*cmd_ptr) = (u64)((code << CMDQ_OP_CODE_SHIFT) | arg_a) << 32 | arg_b;
> + rec->command_size += CMDQ_INST_SIZE;
> + return 0;
> +}
> +
> +int cmdq_rec_write(struct cmdq_rec *rec, u32 value, struct cmdq_base *base,
> + u32 offset)
> +{
> + u32 arg_a = ((base->base + offset) & CMDQ_ARG_A_WRITE_MASK) |
> + ((base->subsys & CMDQ_SUBSYS_MASK) << CMDQ_SUBSYS_SHIFT);
> + return cmdq_rec_append_command(rec, CMDQ_CODE_WRITE, arg_a, value);
> +}
> +EXPORT_SYMBOL(cmdq_rec_write);
> +
> +int cmdq_rec_write_mask(struct cmdq_rec *rec, u32 value,
> + struct cmdq_base *base, u32 offset, u32 mask)
> +{
> + u32 offset_mask = offset;
> + int err;
> +
> + if (mask != 0xffffffff) {
> + err = cmdq_rec_append_command(rec, CMDQ_CODE_MOVE, 0, ~mask);
> + if (err < 0)
> + return err;
> + offset_mask |= CMDQ_ENABLE_MASK;
> + }
> + return cmdq_rec_write(rec, value, base, offset_mask);
> +}
> +EXPORT_SYMBOL(cmdq_rec_write_mask);
> +
> +int cmdq_rec_wfe(struct cmdq_rec *rec, enum cmdq_event event)
> +{
> + u32 arg_b;
> +
> + if (event >= CMDQ_MAX_HW_EVENT_COUNT || event < 0)
> + return -EINVAL;
> +
> + /*
> + * bit 0-11: wait value
> + * bit 15: 1 - wait, 0 - no wait
> + * bit 16-27: update value
> + * bit 31: 1 - update, 0 - no update
> + */
> + arg_b = CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE;
> + return cmdq_rec_append_command(rec, CMDQ_CODE_WFE, event, arg_b);
> +}
> +EXPORT_SYMBOL(cmdq_rec_wfe);
> +
> +int cmdq_rec_clear_event(struct cmdq_rec *rec, enum cmdq_event event)
> +{
> + if (event >= CMDQ_MAX_HW_EVENT_COUNT || event < 0)
> + return -EINVAL;
> +
> + return cmdq_rec_append_command(rec, CMDQ_CODE_WFE, event,
> + CMDQ_WFE_UPDATE);
> +}
> +EXPORT_SYMBOL(cmdq_rec_clear_event);
> +
> +static int cmdq_rec_finalize(struct cmdq_rec *rec)
> +{
> + int err;
> +
> + if (rec->finalized)
> + return 0;
> +
> + /* insert EOC and generate IRQ for each command iteration */
> + err = cmdq_rec_append_command(rec, CMDQ_CODE_EOC, 0, CMDQ_EOC_IRQ_EN);
> + if (err < 0)
> + return err;
> +
> + /* JUMP to end */
> + err = cmdq_rec_append_command(rec, CMDQ_CODE_JUMP, 0, CMDQ_JUMP_PASS);
> + if (err < 0)
> + return err;
> +
> + rec->finalized = true;
> + return 0;
> +}
> +
> +static int _cmdq_rec_flush(struct cmdq_rec *rec, struct cmdq_task **task_out,
> + cmdq_async_flush_cb cb, void *data)
> +{
> + struct cmdq *cmdq = rec->cmdq;
> + struct cmdq_task_cb task_cb;
> + struct cmdq_thread *thread;
> + int err;
> +
> + err = cmdq_rec_finalize(rec);
> + if (err < 0)
> + return err;
> +
> + task_cb.cb = cb;
> + task_cb.data = data;
> + *task_out = cmdq_task_acquire(rec, task_cb);
> + if (!(*task_out))
> + return -EFAULT;
> +
> + thread = &cmdq->thread[cmdq_eng_get_thread((*task_out)->engine_flag)];
> + cmdq_task_exec(*task_out, thread);
> + return 0;
> +}
> +
> +int cmdq_rec_flush(struct cmdq_rec *rec)
> +{
> + struct cmdq_task *task;
> + int err;
> +
> + err = _cmdq_rec_flush(rec, &task, NULL, NULL);
> + if (err < 0)
> + return err;
> + return cmdq_task_wait_and_release(task);
> +}
> +EXPORT_SYMBOL(cmdq_rec_flush);
> +
> +int cmdq_rec_flush_async(struct cmdq_rec *rec, cmdq_async_flush_cb cb,
> + void *data)
> +{
> + struct cmdq_task *task;
> + int err;
> +
> + err = _cmdq_rec_flush(rec, &task, cb, data);
> + if (err < 0)
> + return err;
> + cmdq_task_wait_release_schedule(task);
> + return 0;
> +}
> +EXPORT_SYMBOL(cmdq_rec_flush_async);
> +
> +void cmdq_rec_destroy(struct cmdq_rec *rec)
> +{
> + kfree(rec->buf);
> + kfree(rec);
> +}
> +EXPORT_SYMBOL(cmdq_rec_destroy);
> +
> +static int cmdq_remove(struct platform_device *pdev)
> +{
> + struct cmdq *cmdq = platform_get_drvdata(pdev);
> +
> + destroy_workqueue(cmdq->task_release_wq);
> + cmdq->task_release_wq = NULL;
> + return 0;
> +}
> +
> +static int cmdq_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *node = dev->of_node;
> + struct resource *res;
> + struct cmdq *cmdq;
> + int err, i;
> +
> + cmdq = devm_kzalloc(dev, sizeof(*cmdq), GFP_KERNEL);
> + if (!cmdq)
> + return -ENOMEM;
> + cmdq->dev = dev;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + cmdq->base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(cmdq->base)) {
> + dev_err(dev, "failed to ioremap gce\n");
> + return PTR_ERR(cmdq->base);
> + }
> +
> + cmdq->irq = irq_of_parse_and_map(node, 0);
> + if (!cmdq->irq) {
> + dev_err(dev, "failed to get irq\n");
> + return -EINVAL;
> + }
> +
> + dev_dbg(dev, "cmdq device: addr:0x%p, va:0x%p, irq:%d\n",
> + dev, cmdq->base, cmdq->irq);
> +
> + spin_lock_init(&cmdq->exec_lock);
> + cmdq->task_release_wq = alloc_ordered_workqueue(
> + "%s", WQ_MEM_RECLAIM | WQ_HIGHPRI,
> + "cmdq_task_wait_release");
> +
> + for (i = 0; i < ARRAY_SIZE(cmdq->thread); i++) {
> + cmdq->thread[i].base = cmdq->base + CMDQ_THR_BASE +
> + CMDQ_THR_SHIFT * i;
> + init_waitqueue_head(&cmdq->thread[i].wait_queue);
> + INIT_LIST_HEAD(&cmdq->thread[i].task_busy_list);
> + }
> +
> + platform_set_drvdata(pdev, cmdq);
> +
> + err = devm_request_irq(dev, cmdq->irq, cmdq_irq_handler, IRQF_SHARED,
> + CMDQ_DRIVER_DEVICE_NAME, cmdq);
> + if (err < 0) {
> + dev_err(dev, "failed to register ISR (%d)\n", err);
> + goto fail;
> + }
> +
> + cmdq->clock = devm_clk_get(dev, CMDQ_CLK_NAME);
> + if (IS_ERR(cmdq->clock)) {
> + dev_err(dev, "failed to get clk:%s\n", CMDQ_CLK_NAME);
> + err = PTR_ERR(cmdq->clock);
> + goto fail;
> + }
> + return 0;
> +
> +fail:
> + cmdq_remove(pdev);
> + return err;
> +}
> +
> +static const struct of_device_id cmdq_of_ids[] = {
> + {.compatible = "mediatek,mt8173-gce",},
> + {}
> +};
> +
> +static struct platform_driver cmdq_drv = {
> + .probe = cmdq_probe,
> + .remove = cmdq_remove,
> + .driver = {
> + .name = CMDQ_DRIVER_DEVICE_NAME,
> + .owner = THIS_MODULE,
> + .of_match_table = cmdq_of_ids,
> + }
> +};
> +
> +builtin_platform_driver(cmdq_drv);
> diff --git a/include/soc/mediatek/cmdq.h b/include/soc/mediatek/cmdq.h
> new file mode 100644
> index 0000000..60eef3d
> --- /dev/null
> +++ b/include/soc/mediatek/cmdq.h
> @@ -0,0 +1,197 @@
> +/*
> + * Copyright (c) 2015 MediaTek Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __MTK_CMDQ_H__
> +#define __MTK_CMDQ_H__
> +
> +#include <linux/platform_device.h>
> +#include <linux/types.h>
> +
> +enum cmdq_eng {
> + CMDQ_ENG_DISP_AAL,
> + CMDQ_ENG_DISP_COLOR0,
> + CMDQ_ENG_DISP_COLOR1,
> + CMDQ_ENG_DISP_DPI0,
> + CMDQ_ENG_DISP_DSI0,
> + CMDQ_ENG_DISP_DSI1,
> + CMDQ_ENG_DISP_GAMMA,
> + CMDQ_ENG_DISP_OD,
> + CMDQ_ENG_DISP_OVL0,
> + CMDQ_ENG_DISP_OVL1,
> + CMDQ_ENG_DISP_PWM0,
> + CMDQ_ENG_DISP_PWM1,
> + CMDQ_ENG_DISP_RDMA0,
> + CMDQ_ENG_DISP_RDMA1,
> + CMDQ_ENG_DISP_RDMA2,
> + CMDQ_ENG_DISP_UFOE,
> + CMDQ_ENG_DISP_WDMA0,
> + CMDQ_ENG_DISP_WDMA1,
> + CMDQ_ENG_MAX,
> +};
> +
> +/* events for CMDQ and display */
> +enum cmdq_event {
> + /* Display start of frame(SOF) events */
> + CMDQ_EVENT_DISP_OVL0_SOF = 11,
> + CMDQ_EVENT_DISP_OVL1_SOF = 12,
> + CMDQ_EVENT_DISP_RDMA0_SOF = 13,
> + CMDQ_EVENT_DISP_RDMA1_SOF = 14,
> + CMDQ_EVENT_DISP_RDMA2_SOF = 15,
> + CMDQ_EVENT_DISP_WDMA0_SOF = 16,
> + CMDQ_EVENT_DISP_WDMA1_SOF = 17,
> + /* Display end of frame(EOF) events */
> + CMDQ_EVENT_DISP_OVL0_EOF = 39,
> + CMDQ_EVENT_DISP_OVL1_EOF = 40,
> + CMDQ_EVENT_DISP_RDMA0_EOF = 41,
> + CMDQ_EVENT_DISP_RDMA1_EOF = 42,
> + CMDQ_EVENT_DISP_RDMA2_EOF = 43,
> + CMDQ_EVENT_DISP_WDMA0_EOF = 44,
> + CMDQ_EVENT_DISP_WDMA1_EOF = 45,
> + /* Mutex end of frame(EOF) events */
> + CMDQ_EVENT_MUTEX0_STREAM_EOF = 53,
> + CMDQ_EVENT_MUTEX1_STREAM_EOF = 54,
> + CMDQ_EVENT_MUTEX2_STREAM_EOF = 55,
> + CMDQ_EVENT_MUTEX3_STREAM_EOF = 56,
> + CMDQ_EVENT_MUTEX4_STREAM_EOF = 57,
> + /* Display underrun events */
> + CMDQ_EVENT_DISP_RDMA0_UNDERRUN = 63,
> + CMDQ_EVENT_DISP_RDMA1_UNDERRUN = 64,
> + CMDQ_EVENT_DISP_RDMA2_UNDERRUN = 65,
> + /* Keep this at the end of HW events */
> + CMDQ_MAX_HW_EVENT_COUNT = 260,
> +};
> +
> +struct cmdq_cb_data {
> + bool err;
> + void *data;
> +};
> +
> +typedef int (*cmdq_async_flush_cb)(struct cmdq_cb_data data);
> +
> +struct cmdq_task;
> +struct cmdq;
> +
> +struct cmdq_rec {
> + struct cmdq *cmdq;
> + u64 engine_flag;
> + size_t command_size;
> + void *buf;
> + size_t buf_size;
> + bool finalized;
> +};
> +
> +struct cmdq_base {
> + int subsys;
> + u32 base;
> +};
> +
> +/**
> + * cmdq_register_device() - register device which needs CMDQ
> + * @dev: device
> + *
> + * Return: cmdq_base pointer or NULL for failed
> + */
> +struct cmdq_base *cmdq_register_device(struct device *dev);
> +
> +/**
> + * cmdq_rec_create() - create command queue record
> + * @dev: device
> + * @engine_flag: command queue engine flag
> + * @rec_ptr: command queue record pointer to retrieve cmdq_rec
> + *
> + * Return: 0 for success; else the error code is returned
> + */
> +int cmdq_rec_create(struct device *dev, u64 engine_flag,
> + struct cmdq_rec **rec_ptr);
> +
> +/**
> + * cmdq_rec_write() - append write command to the command queue record
> + * @rec: the command queue record
> + * @value: the specified target register value
> + * @base: the command queue base
> + * @offset: register offset from module base
> + *
> + * Return: 0 for success; else the error code is returned
> + */
> +int cmdq_rec_write(struct cmdq_rec *rec, u32 value,
> + struct cmdq_base *base, u32 offset);
> +
> +/**
> + * cmdq_rec_write_mask() - append write command with mask to the command
> + * queue record
> + * @rec: the command queue record
> + * @value: the specified target register value
> + * @base: the command queue base
> + * @offset: register offset from module base
> + * @mask: the specified target register mask
> + *
> + * Return: 0 for success; else the error code is returned
> + */
> +int cmdq_rec_write_mask(struct cmdq_rec *rec, u32 value,
> + struct cmdq_base *base, u32 offset, u32 mask);
> +
> +/**
> + * cmdq_rec_wfe() - append wait for event command to the command queue record
> + * @rec: the command queue record
> + * @event: the desired event type to "wait and CLEAR"
> + *
> + * Return: 0 for success; else the error code is returned
> + */
> +int cmdq_rec_wfe(struct cmdq_rec *rec, enum cmdq_event event);
> +
> +/**
> + * cmdq_rec_clear_event() - append clear event command to the command queue
> + * record
> + * @rec: the command queue record
> + * @event: the desired event to be cleared
> + *
> + * Return: 0 for success; else the error code is returned
> + */
> +int cmdq_rec_clear_event(struct cmdq_rec *rec, enum cmdq_event event);
> +
> +/**
> + * cmdq_rec_flush() - trigger CMDQ to execute the recorded commands
> + * @rec: the command queue record
> + *
> + * Return: 0 for success; else the error code is returned
> + *
> + * Trigger CMDQ to execute the recorded commands. Note that this is a
> + * synchronous flush function. When the function returned, the recorded
> + * commands have been done.
> + */
> +int cmdq_rec_flush(struct cmdq_rec *rec);
> +
> +/**
> + * cmdq_rec_flush_async() - trigger CMDQ to asynchronously execute the recorded
> + * commands and call back after ISR is finished
> + * @rec: the command queue record
> + * @cb: called in the end of CMDQ ISR
> + * @data: this data will pass back to cb
> + *
> + * Return: 0 for success; else the error code is returned
> + *
> + * Trigger CMDQ to asynchronously execute the recorded commands and call back
> + * after ISR is finished. Note that this is an ASYNC function. When the function
> + * returned, it may or may not be finished. The ISR callback function is called
> + * in the end of ISR.
> + */
> +int cmdq_rec_flush_async(struct cmdq_rec *rec, cmdq_async_flush_cb cb,
> + void *data);
> +
> +/**
> + * cmdq_rec_destroy() - destroy command queue record
> + * @rec: the command queue record
> + */
> +void cmdq_rec_destroy(struct cmdq_rec *rec);
> +
> +#endif /* __MTK_CMDQ_H__ */
Regards,
CK
More information about the linux-arm-kernel
mailing list