[PATCH 2/2 (linux-stable-4.5.y)] stmmac: fix MDIO settings
Giuseppe Cavallaro
peppe.cavallaro at st.com
Mon May 23 06:17:43 PDT 2016
Initially the phy_bus_name was added to manipulate the
driver name but it was recently just used to manage the
fixed-link and then to take some decision at run-time.
So the patch uses the is_pseudo_fixed_link and removes
the phy_bus_name variable not necessary anymore.
The driver can manage the mdio registration by using phy-handle,
dwmac-mdio and own parameter e.g. snps,phy-addr.
This patch takes care about all these possible configurations
and fixes the mdio registration in case of there is a real
transceiver or a switch (that needs to be managed by using
fixed-link).
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro at st.com>
Reviewed-by: Andreas Färber <afaerber at suse.de>
Tested-by: Frank Schäfer <fschaefer.oss at googlemail.com>
Cc: Gabriel Fernandez <gabriel.fernandez at linaro.org>
Cc: Dinh Nguyen <dinh.linux at gmail.com>
Cc: David S. Miller <davem at davemloft.net>
Cc: Phil Reid <preid at electromag.com.au>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 11 +--
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 19 +----
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 84 +++++++++++++++++-----
3 files changed, 70 insertions(+), 44 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index c21015b..389d7d0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -271,7 +271,6 @@ static void stmmac_eee_ctrl_timer(unsigned long arg)
*/
bool stmmac_eee_init(struct stmmac_priv *priv)
{
- char *phy_bus_name = priv->plat->phy_bus_name;
unsigned long flags;
bool ret = false;
@@ -283,7 +282,7 @@ bool stmmac_eee_init(struct stmmac_priv *priv)
goto out;
/* Never init EEE in case of a switch is attached */
- if (phy_bus_name && (!strcmp(phy_bus_name, "fixed")))
+ if (priv->phydev->is_pseudo_fixed_link)
goto out;
/* MAC core supports the EEE feature. */
@@ -820,12 +819,8 @@ static int stmmac_init_phy(struct net_device *dev)
phydev = of_phy_connect(dev, priv->plat->phy_node,
&stmmac_adjust_link, 0, interface);
} else {
- if (priv->plat->phy_bus_name)
- snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x",
- priv->plat->phy_bus_name, priv->plat->bus_id);
- else
- snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
- priv->plat->bus_id);
+ snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
+ priv->plat->bus_id);
snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
priv->plat->phy_addr);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 0faf163..3f5512f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -198,29 +198,12 @@ int stmmac_mdio_register(struct net_device *ndev)
struct mii_bus *new_bus;
struct stmmac_priv *priv = netdev_priv(ndev);
struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
+ struct device_node *mdio_node = priv->plat->mdio_node;
int addr, found;
- struct device_node *mdio_node = NULL;
- struct device_node *child_node = NULL;
if (!mdio_bus_data)
return 0;
- if (IS_ENABLED(CONFIG_OF)) {
- for_each_child_of_node(priv->device->of_node, child_node) {
- if (of_device_is_compatible(child_node,
- "snps,dwmac-mdio")) {
- mdio_node = child_node;
- break;
- }
- }
-
- if (mdio_node) {
- netdev_dbg(ndev, "FOUND MDIO subnode\n");
- } else {
- netdev_warn(ndev, "No MDIO subnode found\n");
- }
- }
-
new_bus = mdiobus_alloc();
if (new_bus == NULL)
return -ENOMEM;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 6a52fa1..190fb6d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -96,6 +96,69 @@ static int dwmac1000_validate_ucast_entries(int ucast_entries)
}
/**
+ * stmmac_dt_phy - parse device-tree driver parameters to allocate PHY resources
+ * @plat: driver data platform structure
+ * @np: device tree node
+ * @dev: device pointer
+ * Description:
+ * The mdio bus will be allocated in case of a phy transceiver is on board;
+ * it will be NULL if the fixed-link is configured.
+ * If there is the "snps,dwmac-mdio" sub-node the mdio will be allocated
+ * in any case (for DSA, mdio must be registered even if fixed-link).
+ * The table below sums the supported configurations:
+ * -------------------------------
+ * snps,phy-addr | Y
+ * -------------------------------
+ * phy-handle | Y
+ * -------------------------------
+ * fixed-link | N
+ * -------------------------------
+ * snps,dwmac-mdio |
+ * even if | Y
+ * fixed-link |
+ * -------------------------------
+ *
+ * It returns 0 in case of success otherwise -ENODEV.
+ */
+static int stmmac_dt_phy(struct plat_stmmacenet_data *plat,
+ struct device_node *np, struct device *dev)
+{
+ bool mdio = true;
+
+ /* If phy-handle property is passed from DT, use it as the PHY */
+ plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
+ if (plat->phy_node)
+ dev_dbg(dev, "Found phy-handle subnode\n");
+
+ /* If phy-handle is not specified, check if we have a fixed-phy */
+ if (!plat->phy_node && of_phy_is_fixed_link(np)) {
+ if ((of_phy_register_fixed_link(np) < 0))
+ return -ENODEV;
+
+ dev_dbg(dev, "Found fixed-link subnode\n");
+ plat->phy_node = of_node_get(np);
+ mdio = false;
+ }
+
+ /* If snps,dwmac-mdio is passed from DT, always register the MDIO */
+ for_each_child_of_node(np, plat->mdio_node) {
+ if (of_device_is_compatible(plat->mdio_node, "snps,dwmac-mdio"))
+ break;
+ }
+
+ if (plat->mdio_node) {
+ dev_dbg(dev, "Found MDIO subnode\n");
+ mdio = true;
+ }
+
+ if (mdio)
+ plat->mdio_bus_data =
+ devm_kzalloc(dev, sizeof(struct stmmac_mdio_bus_data),
+ GFP_KERNEL);
+ return 0;
+}
+
+/**
* stmmac_probe_config_dt - parse device-tree driver parameters
* @pdev: platform_device structure
* @plat: driver data platform structure
@@ -129,30 +192,15 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
/* Default to phy auto-detection */
plat->phy_addr = -1;
- /* If we find a phy-handle property, use it as the PHY */
- plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
-
- /* If phy-handle is not specified, check if we have a fixed-phy */
- if (!plat->phy_node && of_phy_is_fixed_link(np)) {
- if ((of_phy_register_fixed_link(np) < 0))
- return ERR_PTR(-ENODEV);
-
- plat->phy_node = of_node_get(np);
- }
-
/* "snps,phy-addr" is not a standard property. Mark it as deprecated
* and warn of its use. Remove this when phy node support is added.
*/
if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
- if ((plat->phy_node && !of_phy_is_fixed_link(np)) || plat->phy_bus_name)
- plat->mdio_bus_data = NULL;
- else
- plat->mdio_bus_data =
- devm_kzalloc(&pdev->dev,
- sizeof(struct stmmac_mdio_bus_data),
- GFP_KERNEL);
+ /* To Configure PHY by using all device-tree supported properties */
+ if (stmmac_dt_phy(plat, np, &pdev->dev))
+ return ERR_PTR(-ENODEV);
of_property_read_u32(np, "tx-fifo-depth", &plat->tx_fifo_size);
--
2.7.4
More information about the linux-arm-kernel
mailing list