[PATCH 0/6] ARM: dts: sun5i: q8-common: Enable various peripherals

[Chen-Yu Tsai]

Hi everyone,

This series enables more peripherals for Allwinner A13-based Q8 devices.
The peripherals include the WiFi, the PMIC's micro-usb power supply
(driver), audio codec (headphone and speaker), and full display support
with the new DRM KMS driver. The series is based on parts of Maxime's
"drm: Add Support for Passive RGB to VGA bridges" series, specifically
the clk and drm fixes, and common DTS bits.

Hans, since you have a collection of q8 tablets, I'm hoping you could
test these bits and provide some feedback.


Patch 1 is a small fix for part of the init failure path.

Patch 2 disables ldo5 on the axp209 by default. This regulator output is
muxed with a gpio, and the regulator on/off settings override the gpio.

Patch 3 enables the USB WiFi module found.

Patch 4 enables the USB/VBUS power supply of the PMIC.

Patch 5 enables the audio codec, with support for the speaker amp.

Patch 6 enables the LCD panel with the display pipeline.


Regards
ChenYu


Chen-Yu Tsai (6):
  drm: sun4i: do cleanup if RGB output init fails
  ARM: dts: axp209: Disable ldo5 by default
  ARM: dts: sun5i: q8-common: Enable USB-based WiFi
  ARM: dts: sun5i: q8-common: Enable USB power supply
  ARM: dts: sun5i: q8-common: Enable audio codec
  ARM: dts: sun5i: q8-common: Enable display pipeline and LCD display

 arch/arm/boot/dts/axp209.dtsi          |  1 +
 arch/arm/boot/dts/sun5i-q8-common.dtsi | 62 ++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/sun4i/sun4i_tcon.c     |  6 +++-
 3 files changed, 68 insertions(+), 1 deletion(-)

-- 
2.8.1