[PATCH 04/20] clk: sunxi: display: Add per-clock flags
Chen-Yu Tsai
wens at csie.org
Mon May 16 08:21:41 PDT 2016
Hi,
On Mon, May 16, 2016 at 8:47 PM, Maxime Ripard
<maxime.ripard at free-electrons.com> wrote:
> The TCON channel 0 clock that is the parent clock of our pixel clock is
> expected to change its rate depending on the resolution we want to output
> in our display engine.
>
> However, since it's only a mux, the only way it can do that is by changing
> its parents rate.
>
> Allow to give flags in our display clocks description, and add the
> CLK_SET_RATE_PARENT flag for the TCON channel 0 flag.
>
> Fixes: a3b4956ee6d9 ("clk: sunxi: display: Add per-clock flags")
> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> ---
> drivers/clk/sunxi/clk-sun4i-display.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/sunxi/clk-sun4i-display.c b/drivers/clk/sunxi/clk-sun4i-display.c
> index 445a7498d6df..9780fac6d029 100644
> --- a/drivers/clk/sunxi/clk-sun4i-display.c
> +++ b/drivers/clk/sunxi/clk-sun4i-display.c
> @@ -33,6 +33,8 @@ struct sun4i_a10_display_clk_data {
>
> u8 width_div;
> u8 width_mux;
> +
Don't really need this separator, but I'm ok either way.
> + u32 flags;
> };
>
> struct reset_data {
> @@ -166,7 +168,7 @@ static void __init sun4i_a10_display_init(struct device_node *node,
> data->has_div ? &div->hw : NULL,
> data->has_div ? &clk_divider_ops : NULL,
> &gate->hw, &clk_gate_ops,
> - 0);
> + data->flags);
> if (IS_ERR(clk)) {
> pr_err("%s: Couldn't register the clock\n", clk_name);
> goto free_div;
> @@ -232,6 +234,7 @@ static const struct sun4i_a10_display_clk_data sun4i_a10_tcon_ch0_data __initcon
> .offset_rst = 29,
> .offset_mux = 24,
> .width_mux = 2,
> + .flags = CLK_SET_RATE_PARENT,
> };
>
> static void __init sun4i_a10_tcon_ch0_setup(struct device_node *node)
> --
> 2.8.2
>
Acked-by: Chen-Yu Tsai <wens at csie.org>
More information about the linux-arm-kernel
mailing list