[PATCH 2/2] clk: rockchip: fix the rk3399 sdmmc sample shift

[Doug Anderson]

Shawn,

On Fri, May 13, 2016 at 12:46 AM, Shawn Lin <shawn.lin at rock-chips.com> wrote:
>> This should be possible to verify in one of two ways.  If the TRM has
>> a typo and things truly _do_ start at 0 instead of 1, then:
>>
>> 1. There will be roughly mirrors of valid ranges.
>> 2. Things won't match up if we change tuning to use 180 course offsets
>> and the rest fine offsets.
>>
>> It would be ideal if you could confirm with the chip guys, but if you
>
>
> I have checked it before Xing upstreamed the code, but as your question on
> the TRM, I check it with the  chip guys again.
>
> So the answer is that drv/sample stuff should refer to  Mobile Strorage
> Host Controller section, and it will fit the future Socs from now on.

OK, awesome.  I also did more quick tests by forcing dw_mmc to give me
extra details about the tuning.  These tests agree with you.

Please consider this patch abandoned.  Note that the previous patch
(1/2) is still good as far as I know, so just this patch (2/2) should
be abandoned.

Thanks!  :)

-Doug