[PATCH 4/5] iommu/mediatek: add support for mtk iommu generation one HW

Honghui Zhang honghui.zhang at mediatek.com
Thu May 12 05:41:24 PDT 2016


Hi, Robin, Thanks very much for your comment, and sorry for the last
reply format.

On Tue, 2016-05-10 at 11:28 +0100, Robin Murphy wrote:
> On 09/05/16 09:00, honghui.zhang at mediatek.com wrote:
> [...]
> > +static void *mtk_iommu_alloc_pgt(struct device *dev, size_t size, gfp_t gfp)
> > +{
> > +	dma_addr_t dma;
> > +	void *pages = alloc_pages_exact(size, gfp | __GFP_ZERO);
> > +
> > +	if (!pages)
> > +		return NULL;
> > +
> > +	dma = dma_map_single(dev, pages, size, DMA_TO_DEVICE);
> > +	if (dma_mapping_error(dev, dma))
> > +		goto out_free;
> > +	/*
> > +	 * We depend on the IOMMU being able to work with any physical
> > +	 * address directly, so if the DMA layer suggests otherwise by
> > +	 * translating or truncating them, that bodes very badly...
> > +	 */
> > +	if (dma != virt_to_phys(pages))
> > +		goto out_unmap;
> 
> Given that you've only got a single table to allocate, and at 4MB it has 
> a fair chance of failing beyond early boot time, just use 
> dma_alloc_coherent() - you don't need to care about the dma <-> phys 
> relationship because you don't have multi-level tables to walk. That 
> way, you can get rid of all the awkward streaming DMA stuff, and also 
> benefit from CMA to avoid allocation failures.
> 

The dma_alloc_coheret interface is good enough for me, thanks.

> > +	kmemleak_ignore(pages);
> > +	return pages;
> > +
> > +out_unmap:
> > +	dev_err(dev, "Cannot accommodate DMA translation for IOMMU page tables\n");
> > +	dma_unmap_single(dev, dma, size, DMA_TO_DEVICE);
> > +out_free:
> > +	free_pages_exact(pages, size);
> > +	return NULL;
> > +
> > +}
> > +
> > +static void mtk_iommu_free_pgt(struct device *dev, void *pages, size_t size)
> > +{
> > +	dma_unmap_single(dev, (dma_addr_t)virt_to_phys(pages),
> > +			 size, DMA_TO_DEVICE);
> > +	free_pages_exact(pages, size);
> > +}
> > +
> > +static int mtk_iommu_domain_finalise(struct mtk_iommu_data *data)
> > +{
> > +	struct mtk_iommu_domain *dom = data->m4u_dom;
> > +
> > +	spin_lock_init(&dom->pgtlock);
> > +
> > +	dom->pgt_va = mtk_iommu_alloc_pgt(data->dev,
> > +				dom->pgt_size, GFP_KERNEL);
> > +	if (!dom->pgt_va)
> > +		return -ENOMEM;
> > +
> > +	dom->pgt_pa = virt_to_phys(dom->pgt_va);
> > +
> > +	writel(dom->pgt_pa, data->base + REG_MMU_PT_BASE_ADDR);
> > +
> > +	dom->cookie = (void *)data;
> > +
> > +	return 0;
> > +}
> > +
> > +static struct iommu_domain *mtk_iommu_domain_alloc(unsigned type)
> > +{
> > +	struct mtk_iommu_domain *dom;
> > +
> > +	if (type != IOMMU_DOMAIN_UNMANAGED)
> > +		return NULL;
> > +
> > +	dom = kzalloc(sizeof(*dom), GFP_KERNEL);
> > +	if (!dom)
> > +		return NULL;
> > +
> > +	/*
> > +	 * MTK m4u support 4GB iova address space, and oly support 4K page
> > +	 * mapping. So the pagetable size should be exactly as 4M.
> > +	 */
> > +	dom->pgt_size = SZ_4M;
> 
> If the table size is fixed, then why bother having a variable at all?

I will follow your advise for next version.
thanks.
> 
> > +	return &dom->domain;
> > +}
> > +
> > +static void mtk_iommu_domain_free(struct iommu_domain *domain)
> > +{
> > +	kfree(to_mtk_domain(domain));
> > +}
> > +
> 
> [...]
> 
> > +static int mtk_iommu_map(struct iommu_domain *domain, unsigned long iova,
> > +			 phys_addr_t paddr, size_t size, int prot)
> > +{
> > +	struct mtk_iommu_domain *dom = to_mtk_domain(domain);
> > +	struct mtk_iommu_data *data = dom->cookie;
> > +	unsigned int page_num = size >> MTK_IOMMU_PAGE_SHIFT;
> 
> Since you only advertise a single page size, this will always be 1, so 
> you could either get rid of the loop here...

I would prefer your following advise to modify the pgsize_bitmap, thanks
very much.

> 
> > +	unsigned long flags;
> > +	unsigned int i;
> > +	u32 *pgt_base_iova;
> > +	u32 pabase = (u32)paddr;
> > +	int map_size = 0;
> > +
> > +	spin_lock_irqsave(&dom->pgtlock, flags);
> > +	pgt_base_iova = dom->pgt_va + (iova  >> MTK_IOMMU_PAGE_SHIFT);
> > +	for (i = 0; i < page_num; i++) {
> > +		pgt_base_iova[i] = pabase | F_DESC_VALID | F_DESC_NONSEC;
> > +		pabase += MTK_IOMMU_PAGE_SIZE;
> > +		map_size += MTK_IOMMU_PAGE_SIZE;
> > +	}
> > +	dma_sync_single_for_device(data->dev,
> > +			dom->pgt_pa + (iova >> MTK_IOMMU_PAGE_SHIFT),
> > +			(size >> MTK_IOMMU_PAGE_SHIFT) * sizeof(u32),
> > +			DMA_TO_DEVICE);
> > +	spin_unlock_irqrestore(&dom->pgtlock, flags);
> > +
> > +	mtk_iommu_tlb_flush_range(data, iova, size);
> > +
> > +	return map_size;
> > +}
> 
> [...]
> 
> > +static struct iommu_ops mtk_iommu_ops = {
> > +	.domain_alloc	= mtk_iommu_domain_alloc,
> > +	.domain_free	= mtk_iommu_domain_free,
> > +	.attach_dev	= mtk_iommu_attach_device,
> > +	.detach_dev	= mtk_iommu_detach_device,
> > +	.map		= mtk_iommu_map,
> > +	.unmap		= mtk_iommu_unmap,
> > +	.map_sg		= default_iommu_map_sg,
> > +	.iova_to_phys	= mtk_iommu_iova_to_phys,
> > +	.add_device	= mtk_iommu_add_device,
> > +	.remove_device	= mtk_iommu_remove_device,
> > +	.device_group	= mtk_iommu_device_group,
> > +	.pgsize_bitmap	= MTK_IOMMU_PAGE_SIZE,
> > +};
> 
> ...or perhaps advertise .pgsize_bitmap = ~0UL << MTK_IOMMU_PAGE_SHIFT 
> here, so you actually can handle multiple entries at once for larger 
> mappings - given how simple the page table format is that doesn't seem 
> too unreasonable, especially since it should give you a big efficiency 
> win in terms of TLB maintenance.
> 
> Robin.
> 





More information about the linux-arm-kernel mailing list