[PATCH v3 33/55] KVM: arm/arm64: vgic-new: Add GICv3 CTLR, IIDR, TYPER handlers

Andre Przywara andre.przywara at arm.com
Thu May 12 05:33:24 PDT 2016


Hi,

On 12/05/16 12:47, Christoffer Dall wrote:
> On Fri, May 06, 2016 at 11:45:46AM +0100, Andre Przywara wrote:
>> As in the GICv2 emulation we handle those three registers in one
>> function.
>>
>> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
>> ---
>> Changelog RFC..v1:
>> - kick VCPUs if distributor gets enabled
>>
>> Changelog v1 .. v2:
>> - rewrite write handler to use switch statement
>>
>>  virt/kvm/arm/vgic/vgic-mmio-v3.c | 50 +++++++++++++++++++++++++++++++++++++++-
>>  virt/kvm/arm/vgic/vgic.h         |  2 ++
>>  2 files changed, 51 insertions(+), 1 deletion(-)
>>
>> diff --git a/virt/kvm/arm/vgic/vgic-mmio-v3.c b/virt/kvm/arm/vgic/vgic-mmio-v3.c
>> index 06c7ec5..5f4558c 100644
>> --- a/virt/kvm/arm/vgic/vgic-mmio-v3.c
>> +++ b/virt/kvm/arm/vgic/vgic-mmio-v3.c
>> @@ -22,6 +22,54 @@
>>  #include "vgic.h"
>>  #include "vgic-mmio.h"
>>  
>> +static unsigned long vgic_mmio_read_v3_misc(struct kvm_vcpu *vcpu,
>> +					    gpa_t addr, unsigned int len)
>> +{
>> +	u32 value = 0;
>> +
>> +	switch (addr & 0x0c) {
>> +	case GICD_CTLR:
>> +		if (vcpu->kvm->arch.vgic.enabled)
>> +			value |= GICD_CTLR_ENABLE_SS_G1;
>> +		value |= GICD_CTLR_ARE_NS | GICD_CTLR_DS;
>> +		break;
>> +	case GICD_TYPER:
>> +		value = vcpu->kvm->arch.vgic.nr_spis + VGIC_NR_PRIVATE_IRQS;
>> +		value = (value >> 5) - 1;
>> +		value |= (INTERRUPT_ID_BITS_SPIS - 1) << 19;
>> +		break;
>> +	case GICD_IIDR:
>> +		value = (PRODUCT_ID_KVM << 24) | (IMPLEMENTER_ARM << 0);
>> +		break;
>> +	default:
>> +		return 0;
>> +	}
>> +
>> +	return extract_bytes(value, addr & 3, len);
> 
> why do we return extract_bytes here?  This register can only be accessed
> in full with a 32-bit aligned access, right?

... which we only ensure since last night.
So: yes, I think this can go.
Will fix it.

> 
>> +}
>> +
>> +static void vgic_mmio_write_v3_misc(struct kvm_vcpu *vcpu,
>> +				    gpa_t addr, unsigned int len,
>> +				    unsigned long val)
>> +{
>> +	switch (addr & 0x0c) {
>> +	case GICD_CTLR:
>> +		if (!(addr & 1)) {
> 
> obviously same question as on the v2 counterpart

Noted, will be fixed.

Cheers,
Andre.

> 
>> +			struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
>> +			bool was_enabled = dist->enabled;
>> +
>> +			dist->enabled = val & GICD_CTLR_ENABLE_SS_G1;
>> +
>> +			if (!was_enabled && dist->enabled)
>> +				vgic_kick_vcpus(vcpu->kvm);
>> +		}
>> +		break;
>> +	case GICD_TYPER:
>> +	case GICD_IIDR:
>> +		return;
>> +	}
>> +}
>> +
>>  /*
>>   * The GICv3 per-IRQ registers are split to control PPIs and SGIs in the
>>   * redistributors, while SPIs are covered by registers in the distributor
>> @@ -46,7 +94,7 @@
>>  
>>  static const struct vgic_register_region vgic_v3_dist_registers[] = {
>>  	REGISTER_DESC_WITH_LENGTH(GICD_CTLR,
>> -		vgic_mmio_read_raz, vgic_mmio_write_wi, 16),
>> +		vgic_mmio_read_v3_misc, vgic_mmio_write_v3_misc, 16),
>>  	REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_IGROUPR,
>>  		vgic_mmio_read_rao, vgic_mmio_write_wi, 1),
>>  	REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_ISENABLER,
>> diff --git a/virt/kvm/arm/vgic/vgic.h b/virt/kvm/arm/vgic/vgic.h
>> index 39a8a65..635e2e2 100644
>> --- a/virt/kvm/arm/vgic/vgic.h
>> +++ b/virt/kvm/arm/vgic/vgic.h
>> @@ -19,6 +19,8 @@
>>  #define PRODUCT_ID_KVM		0x4b	/* ASCII code K */
>>  #define IMPLEMENTER_ARM		0x43b
>>  
>> +#define INTERRUPT_ID_BITS_SPIS	10
>> +
>>  #define vgic_irq_is_sgi(intid) ((intid) < VGIC_NR_SGIS)
>>  
>>  struct vgic_irq *vgic_get_irq(struct kvm *kvm, struct kvm_vcpu *vcpu,
>> -- 
>> 2.7.3
>>
> 



More information about the linux-arm-kernel mailing list