[PATCH v8 1/8] i2c: rk3x: add documentation to fields in "struct rk3x_i2c"

Heiko Stuebner heiko at sntech.de
Wed May 11 08:04:49 PDT 2016


Am Mittwoch, 11. Mai 2016, 03:24:05 schrieb David Wu:

In general, all patches should have a commit message (even if it's obvious) 
and some maintainers even enforce this in a hard way.

How about something like:

----
Add kernel-doc documentation for the elements of the previously
undocumented struct rk3x_i2c.
----

Some minor nitpicks below, otherwise
Reviewed-by: Heiko Stuebner <heiko at sntech.de>

> Signed-off-by: David Wu <david.wu at rock-chips.com>
> Reviewed-by: Douglas Anderson <dianders at chromium.org>
> ---
> Change in v8:
> - none
> 
>  drivers/i2c/busses/i2c-rk3x.c | 22 +++++++++++++++++++++-
>  1 file changed, 21 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
> index 80bed02..7e45d51 100644
> --- a/drivers/i2c/busses/i2c-rk3x.c
> +++ b/drivers/i2c/busses/i2c-rk3x.c
> @@ -90,6 +90,26 @@ struct rk3x_i2c_soc_data {
>  	int grf_offset;
>  };
> 
> +/**
> + * struct rk3x_i2c - private data of the controller
> + * @adap: corresponding I2C adapter
> + * @dev: device for this controller
> + * @soc_data: related soc data struct
> + * @regs: virtual memory area
> + * @clk: clock of i2c bus
> + * @clk_rate_nb: i2c clk rate change notify
		^ i2c clk rate change notifier block

> + * @t: I2C known timing information
> + * @lock: spinlock for the i2c bus
> + * @wait: the waitqueue to wait for i2c transfer
> + * @busy: the condition for the event to wait for
> + * @msg: current i2c message
> + * @addr: addr of i2c slave device
> + * @mode: mode of i2c transfer
> + * @is_last_msg: flag determines whether it is the last msg in this
> transfer + * @state: state of i2c transfer
> + * @processed: byte length which has been send or received
										^ sent (with a "t")

> + * @error: error code for i2c transfer
> + */
>  struct rk3x_i2c {
>  	struct i2c_adapter adap;
>  	struct device *dev;
> @@ -116,7 +136,7 @@ struct rk3x_i2c {
> 
>  	/* I2C state machine */
>  	enum rk3x_i2c_state state;
> -	unsigned int processed; /* sent/received bytes */
> +	unsigned int processed;
>  	int error;
>  };




More information about the linux-arm-kernel mailing list