[PATCH v3 21/55] KVM: arm/arm64: vgic-new: Add MMIO handling framework
Christoffer Dall
christoffer.dall at linaro.org
Wed May 11 02:46:49 PDT 2016
On Fri, May 06, 2016 at 11:45:34AM +0100, Andre Przywara wrote:
> From: Marc Zyngier <marc.zyngier at arm.com>
>
> Add an MMIO handling framework to the VGIC emulation:
> Each register is described by its offset, size (or number of bits per
> IRQ, if applicable) and the read/write handler functions. We provide
> initialization macros to describe each GIC register later easily.
>
> Separate dispatch functions for read and write accesses are connected
> to the kvm_io_bus framework and binary-search for the responsible
> register handler based on the offset address within the region.
> We convert the incoming data (referenced by a pointer) to the host's
> endianess and use pass-by-value to hand the data over to the actual
> handler functions.
>
> The register handler prototype and the endianess conversion are
> courtesy of Christoffer Dall.
>
> Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
> Signed-off-by: Christoffer Dall <christoffer.dall at linaro.org>
> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
> ---
> Changelog RFC..v1:
> - rework MMIO dispatching to use only one kvm_io_bus device
> - document purpose of register region macros
> - rename "this" parameter to "dev"
> - change IGROUPR to be RAO (returning 1 => Group1 IRQs)
>
> Changelog v1 .. v2:
> * MASSIVE rework:
> - store register_region pointer in kvm_io_bus linked struct
> - replace write_mask_xxx functions with extract_bytes() implementation
> - change handler functions' prototypes to take and return unsigned long
> - use binary search to find matching register handler
> - convert endianess of input data in dispatch_mmio_xxx functions
> - improve readability of register initializer macros
> - remove any GICv2/GICv3 specific functions from vgic-mmio.c
> - rename file from vgic_mmio.c to vgic-mmio.c
>
> Changelog v2 .. v3:
> - replace inclusion of vgic/vgic.h with arm_vgic.h
>
> include/kvm/vgic/vgic.h | 13 ++++
> virt/kvm/arm/vgic/vgic-mmio.c | 171 ++++++++++++++++++++++++++++++++++++++++++
> virt/kvm/arm/vgic/vgic-mmio.h | 77 +++++++++++++++++++
> 3 files changed, 261 insertions(+)
> create mode 100644 virt/kvm/arm/vgic/vgic-mmio.c
> create mode 100644 virt/kvm/arm/vgic/vgic-mmio.h
>
> diff --git a/include/kvm/vgic/vgic.h b/include/kvm/vgic/vgic.h
> index 2615205..4ec1270 100644
> --- a/include/kvm/vgic/vgic.h
> +++ b/include/kvm/vgic/vgic.h
> @@ -106,6 +106,16 @@ struct vgic_irq {
> enum vgic_irq_config config; /* Level or edge */
> };
>
> +struct vgic_register_region;
> +
> +struct vgic_io_device {
> + gpa_t base_addr;
> + struct kvm_vcpu *redist_vcpu;
> + const struct vgic_register_region *regions;
> + int nr_regions;
> + struct kvm_io_device dev;
> +};
> +
> struct vgic_dist {
> bool in_kernel;
> bool ready;
> @@ -132,6 +142,9 @@ struct vgic_dist {
> bool enabled;
>
> struct vgic_irq *spis;
> +
> + struct vgic_io_device dist_iodev;
> + struct vgic_io_device *redist_iodevs;
> };
>
> struct vgic_v2_cpu_if {
> diff --git a/virt/kvm/arm/vgic/vgic-mmio.c b/virt/kvm/arm/vgic/vgic-mmio.c
> new file mode 100644
> index 0000000..f5628cb
> --- /dev/null
> +++ b/virt/kvm/arm/vgic/vgic-mmio.c
> @@ -0,0 +1,171 @@
> +/*
> + * VGIC MMIO handling functions
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/bsearch.h>
> +#include <linux/kvm.h>
> +#include <linux/kvm_host.h>
> +#include <kvm/iodev.h>
> +#include <kvm/arm_vgic.h>
> +
> +#include "vgic.h"
> +#include "vgic-mmio.h"
> +
> +/* extract @num bytes at @offset bytes offset in data */
> +unsigned long extract_bytes(unsigned long data,
> + unsigned int offset, unsigned int num)
> +{
> + return (data >> (offset * 8)) & GENMASK_ULL(num * 8 - 1, 0);
> +}
> +
> +unsigned long vgic_mmio_read_raz(struct kvm_vcpu *vcpu,
> + gpa_t addr, unsigned int len)
> +{
> + return 0;
> +}
> +
> +unsigned long vgic_mmio_read_rao(struct kvm_vcpu *vcpu,
> + gpa_t addr, unsigned int len)
> +{
> + return -1UL;
> +}
> +
> +void vgic_mmio_write_wi(struct kvm_vcpu *vcpu, gpa_t addr,
> + unsigned int len, unsigned long val)
> +{
> + /* Ignore */
> +}
> +
> +static int match_region(const void *key, const void *elt)
> +{
> + const unsigned int offset = (unsigned long)key;
> + const struct vgic_register_region *region = elt;
> +
> + if (offset < region->reg_offset)
> + return -1;
> +
> + if (offset >= region->reg_offset + region->len)
> + return 1;
> +
> + return 0;
> +}
> +
> +/* Find the proper register handler entry given a certain address offset. */
> +static const struct vgic_register_region *
> +vgic_find_mmio_region(const struct vgic_register_region *region, int nr_regions,
> + unsigned int offset)
> +{
> + return bsearch((void *)(uintptr_t)offset, region, nr_regions,
> + sizeof(region[0]), match_region);
> +}
> +
> +/*
> + * kvm_mmio_read_buf() returns a value in a format where it can be converted
> + * to a byte array and be directly observed as the guest wanted it to appear
> + * in memory if it had done the store itself, which is LE for the GIC, as the
> + * guest knows the GIC is always LE.
> + *
> + * We convert this value to the CPUs native format to deal with it as a data
> + * value.
> + */
> +unsigned long vgic_data_mmio_bus_to_host(const void *val, unsigned int len)
> +{
> + unsigned long data = kvm_mmio_read_buf(val, len);
> +
> + switch (len) {
> + case 1:
> + return data;
> + case 2:
> + return le16_to_cpu(data);
> + case 4:
> + return le32_to_cpu(data);
> + default:
> + return le64_to_cpu(data);
> + }
> +}
> +
> +/*
> + * kvm_mmio_write_buf() expects a value in a format such that if converted to
> + * a byte array it is observed as the guest would see it if it could perform
> + * the load directly. Since the GIC is LE, and the guest knows this, the
> + * guest expects a value in little endian format.
> + *
> + * We convert the data value from the CPUs native format to LE so that the
> + * value is returned in the proper format.
> + */
> +void vgic_data_host_to_mmio_bus(void *buf, unsigned int len,
> + unsigned long data)
> +{
> + switch (len) {
> + case 1:
> + break;
> + case 2:
> + data = cpu_to_le16(data);
> + break;
> + case 4:
> + data = cpu_to_le32(data);
> + break;
> + default:
> + data = cpu_to_le64(data);
> + }
> +
> + kvm_mmio_write_buf(buf, len, data);
> +}
> +
> +static
> +struct vgic_io_device *kvm_to_vgic_iodev(const struct kvm_io_device *dev)
> +{
> + return container_of(dev, struct vgic_io_device, dev);
> +}
> +
> +static int dispatch_mmio_read(struct kvm_vcpu *vcpu, struct kvm_io_device *dev,
> + gpa_t addr, int len, void *val)
> +{
> + struct vgic_io_device *iodev = kvm_to_vgic_iodev(dev);
> + const struct vgic_register_region *region;
> + struct kvm_vcpu *r_vcpu;
> + unsigned long data;
> +
> + region = vgic_find_mmio_region(iodev->regions, iodev->nr_regions,
> + addr - iodev->base_addr);
> + if (!region)
> + return -EOPNOTSUPP;
> +
> + r_vcpu = iodev->redist_vcpu ? iodev->redist_vcpu : vcpu;
> + data = region->read(r_vcpu, addr, len);
> + vgic_data_host_to_mmio_bus(val, len, data);
> + return 0;
> +}
> +
> +static int dispatch_mmio_write(struct kvm_vcpu *vcpu, struct kvm_io_device *dev,
> + gpa_t addr, int len, const void *val)
> +{
> + struct vgic_io_device *iodev = kvm_to_vgic_iodev(dev);
> + const struct vgic_register_region *region;
> + struct kvm_vcpu *r_vcpu;
> + unsigned long data = vgic_data_mmio_bus_to_host(val, len);
> +
> + region = vgic_find_mmio_region(iodev->regions, iodev->nr_regions,
> + addr - iodev->base_addr);
> + if (!region)
> + return -EOPNOTSUPP;
> +
> + r_vcpu = iodev->redist_vcpu ? iodev->redist_vcpu : vcpu;
> + region->write(r_vcpu, addr, len, data);
> + return 0;
> +}
> +
> +struct kvm_io_device_ops kvm_io_gic_ops = {
> + .read = dispatch_mmio_read,
> + .write = dispatch_mmio_write,
> +};
> diff --git a/virt/kvm/arm/vgic/vgic-mmio.h b/virt/kvm/arm/vgic/vgic-mmio.h
> new file mode 100644
> index 0000000..18d3869
> --- /dev/null
> +++ b/virt/kvm/arm/vgic/vgic-mmio.h
> @@ -0,0 +1,77 @@
> +/*
> + * Copyright (C) 2015, 2016 ARM Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +#ifndef __KVM_ARM_VGIC_MMIO_H__
> +#define __KVM_ARM_VGIC_MMIO_H__
> +
> +struct vgic_register_region {
> + unsigned int reg_offset;
> + unsigned int len;
> + unsigned int bits_per_irq;
> + unsigned long (*read)(struct kvm_vcpu *vcpu, gpa_t addr,
> + unsigned int len);
> + void (*write)(struct kvm_vcpu *vcpu, gpa_t addr, unsigned int len,
> + unsigned long val);
> +};
> +
> +extern struct kvm_io_device_ops kvm_io_gic_ops;
> +
> +/*
> + * Some VGIC registers store per-IRQ information, with a different number
> + * of bits per IRQ. For those registers this macro is used.
> + * The _WITH_LENGTH version instantiates registers with a fixed length
> + * and is mutually exclusive with the _PER_IRQ version.
> + */
> +#define REGISTER_DESC_WITH_BITS_PER_IRQ(off, read_ops, write_ops, bpi) \
> + { \
> + .reg_offset = off, \
> + .bits_per_irq = bpi, \
> + .len = bpi * 1024 / 8, \
> + .read = read_ops, \
> + .write = write_ops, \
> + }
> +
> +#define REGISTER_DESC_WITH_LENGTH(off, read_ops, write_ops, length) \
> + { \
> + .reg_offset = off, \
> + .bits_per_irq = 0, \
> + .len = length, \
> + .read = read_ops, \
> + .write = write_ops, \
> + }
> +
> +int kvm_vgic_register_mmio_region(struct kvm *kvm, struct kvm_vcpu *vcpu,
> + struct vgic_register_region *reg_desc,
> + struct vgic_io_device *region,
> + int nr_irqs, bool offset_private);
> +
> +unsigned long vgic_data_mmio_bus_to_host(const void *val, unsigned int len);
> +
> +void vgic_data_host_to_mmio_bus(void *buf, unsigned int len,
> + unsigned long data);
> +
> +unsigned long extract_bytes(unsigned long data,
> + unsigned int offset, unsigned int num);
> +
> +unsigned long vgic_mmio_read_raz(struct kvm_vcpu *vcpu,
> + gpa_t addr, unsigned int len);
> +
> +unsigned long vgic_mmio_read_rao(struct kvm_vcpu *vcpu,
> + gpa_t addr, unsigned int len);
> +
> +void vgic_mmio_write_wi(struct kvm_vcpu *vcpu, gpa_t addr,
> + unsigned int len, unsigned long val);
> +
> +#endif
> --
> 2.7.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
Reviewed-by: Christoffer Dall <christoffer.dall at linaro.org>
More information about the linux-arm-kernel
mailing list