[PATCH RESEND 0/3] pwm support for Broadcom iProc SoC's

[Yendapally Reddy Dhananjaya Reddy]

Hi Thierry,

  Can you please provide review comments for this patch set.

Thanks
Dhananjay

On Tue, Mar 29, 2016 at 7:52 PM, Yendapally Reddy Dhananjaya Reddy
<yendapally.reddy at broadcom.com> wrote:
> This patchset contains the pwm support for the Broadcom's iProc SoC's.
>
> The first patch provides the documentation details and the
> second patch contains the controller support details. The third patch
> contains the enable method for Northstar Plus SoC.
>
> This patch series has been tested on NSP bcm958625HR board with oscilloscope.
> The pwm is not enabled for this board as the pins are open and not used.
>
> This patch series is based on v4.6.0-rc1 and is available from github
> repo: https://github.com/Broadcom/cygnus-linux.git
> branch: iproc-pwm-v1
>
> This patch series was originally sent on 03/01/16.
> See https://lkml.org/lkml/2016/3/1/487
>
> Yendapally Reddy Dhananjaya Reddy (3):
>   Documentation: dt: Add Broadcom iproc pwm controller binding
>   pwm: kona: Add support for Broadcom iproc pwm controller
>   ARM: dts: NSP: Add PWM Support to DT
>
>  .../devicetree/bindings/pwm/brcm,kona-pwm.txt      |   2 +-
>  arch/arm/boot/dts/bcm-nsp.dtsi                     |   8 +
>  drivers/pwm/Kconfig                                |   6 +-
>  drivers/pwm/pwm-bcm-kona.c                         | 183 ++++++++++++++++++---
>  4 files changed, 172 insertions(+), 27 deletions(-)
>
> --
> 2.1.0
>