[PATCH] ARM: dts: exynos: Only Odroid XU3-family boards use DTSI with CPU thermal nodes
Anand Moon
linux.amoon at gmail.com
Tue May 10 02:29:27 PDT 2016
Hi Krzysztof,
On 10 May 2016 at 13:45, Krzysztof Kozlowski <k.kozlowski at samsung.com> wrote:
> On 05/10/2016 08:43 AM, Anand Moon wrote:
>> Hi Krzysztof ,
>>
>> On 9 May 2016 at 11:49, Krzysztof Kozlowski <k.kozlowski at samsung.com> wrote:
>>> Include the CPU thermal nodes directly in Odroid XU3-family common DTS
>>> because it is the only user of it. Keeping it in separate DTSI node does
>>> not bring benefits because:
>>> 1. It is not re-usable on other non-fan boards (fan is referenced),
>>> 2. It won't be re-used on future Odroid XU board because different
>>> CPU cluster behavior.
>>>
>>> Signed-off-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
>>> ---
>>> arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi | 103 ---------------------
>>> arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 94 ++++++++++++++++++-
>>> 2 files changed, 92 insertions(+), 105 deletions(-)
>>> delete mode 100644 arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi
>>>
>>> diff --git a/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi
>>> deleted file mode 100644
>>> index 3e4c4ad96d63..000000000000
>>> --- a/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi
>>> +++ /dev/null
>>> @@ -1,103 +0,0 @@
>>> -/*
>>> - * Device tree sources for Exynos5422 thermal zone
>>> - *
>>> - * Copyright (c) 2015 Lukasz Majewski <l.majewski at samsung.com>
>>> - * Anand Moon <linux.amoon at gmail.com>
>>> - *
>>> - * This program is free software; you can redistribute it and/or modify
>>> - * it under the terms of the GNU General Public License version 2 as
>>> - * published by the Free Software Foundation.
>>> - *
>>> - */
>>> -
>>> -#include <dt-bindings/thermal/thermal.h>
>>> -
>>> -/ {
>>> - thermal-zones {
>>> - cpu0_thermal: cpu0-thermal {
>>> - thermal-sensors = <&tmu_cpu0 0>;
>>> - polling-delay-passive = <250>;
>>> - polling-delay = <0>;
>>> - trips {
>>> - cpu_alert0: cpu-alert-0 {
>>> - temperature = <50000>; /* millicelsius */
>>> - hysteresis = <5000>; /* millicelsius */
>>> - type = "active";
>>> - };
>>> - cpu_alert1: cpu-alert-1 {
>>> - temperature = <60000>; /* millicelsius */
>>> - hysteresis = <5000>; /* millicelsius */
>>> - type = "active";
>>> - };
>>> - cpu_alert2: cpu-alert-2 {
>>> - temperature = <70000>; /* millicelsius */
>>> - hysteresis = <5000>; /* millicelsius */
>>> - type = "active";
>>> - };
>>> - cpu_crit0: cpu-crit-0 {
>>> - temperature = <120000>; /* millicelsius */
>>> - hysteresis = <0>; /* millicelsius */
>>> - type = "critical";
>>> - };
>>> - /*
>>> - * Exyunos542x support only 4 trip-points
>>> - * so for these polling mode is required.
>>> - * Start polling at temperature level of last
>>> - * interrupt-driven trip: cpu_alert2
>>> - */
>>> - cpu_alert3: cpu-alert-3 {
>>> - temperature = <70000>; /* millicelsius */
>>> - hysteresis = <10000>; /* millicelsius */
>>> - type = "passive";
>>> - };
>>> - cpu_alert4: cpu-alert-4 {
>>> - temperature = <85000>; /* millicelsius */
>>> - hysteresis = <10000>; /* millicelsius */
>>> - type = "passive";
>>> - };
>>> -
>>> - };
>>> - cooling-maps {
>>> - map0 {
>>> - trip = <&cpu_alert0>;
>>> - cooling-device = <&fan0 0 1>;
>>> - };
>>> - map1 {
>>> - trip = <&cpu_alert1>;
>>> - cooling-device = <&fan0 1 2>;
>>> - };
>>> - map2 {
>>> - trip = <&cpu_alert2>;
>>> - cooling-device = <&fan0 2 3>;
>>> - };
>>> - /*
>>> - * When reaching cpu_alert3, reduce CPU
>>> - * by 2 steps. On Exynos5422/5800 that would
>>> - * be: 1500 MHz and 1100 MHz.
>>> - */
>>> - map3 {
>>> - trip = <&cpu_alert3>;
>>> - cooling-device = <&cpu0 0 2>;
>>> - };
>>> - map4 {
>>> - trip = <&cpu_alert3>;
>>> - cooling-device = <&cpu4 0 2>;
>>> - };
>>> -
>>> - /*
>>> - * When reaching cpu_alert4, reduce CPU
>>> - * further, down to 600 MHz (11 steps for big,
>>> - * 7 steps for LITTLE).
>>> - */
>>> - map5 {
>>> - trip = <&cpu_alert4>;
>>> - cooling-device = <&cpu0 3 7>;
>>> - };
>>> - map6 {
>>> - trip = <&cpu_alert4>;
>>> - cooling-device = <&cpu4 3 11>;
>>> - };
>>> - };
>>> - };
>>> - };
>>> -};
>>> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
>>> index 2a4e10bc8801..ff05041835e5 100644
>>> --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
>>> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
>>> @@ -1,9 +1,11 @@
>>> /*
>>> * Hardkernel Odroid XU3 board device tree source
>>> *
>>> - * Copyright (c) 2014 Collabora Ltd.
>>> * Copyright (c) 2013 Samsung Electronics Co., Ltd.
>>> * http://www.samsung.com
>>> + * Copyright (c) 2014 Collabora Ltd.
>>> + * Copyright (c) 2015 Lukasz Majewski <l.majewski at samsung.com>
>>> + * Anand Moon <linux.amoon at gmail.com>
>>> *
>>> * This program is free software; you can redistribute it and/or modify
>>> * it under the terms of the GNU General Public License version 2 as
>>> @@ -16,7 +18,6 @@
>>> #include <dt-bindings/sound/samsung-i2s.h>
>>> #include "exynos5800.dtsi"
>>> #include "exynos5422-cpus.dtsi"
>>> -#include "exynos5422-cpu-thermal.dtsi"
>>>
>>> / {
>>> memory {
>>> @@ -54,6 +55,95 @@
>>> #cooling-cells = <2>;
>>> cooling-levels = <0 130 170 230>;
>>> };
>>> +
>>> + thermal-zones {
>>> + cpu0_thermal: cpu0-thermal {
>>> + thermal-sensors = <&tmu_cpu0 0>;
>>> + polling-delay-passive = <250>;
>>> + polling-delay = <0>;
>>> + trips {
>>> + cpu_alert0: cpu-alert-0 {
>>> + temperature = <50000>; /* millicelsius */
>>> + hysteresis = <5000>; /* millicelsius */
>>> + type = "active";
>>> + };
>>> + cpu_alert1: cpu-alert-1 {
>>> + temperature = <60000>; /* millicelsius */
>>> + hysteresis = <5000>; /* millicelsius */
>>> + type = "active";
>>> + };
>>> + cpu_alert2: cpu-alert-2 {
>>> + temperature = <70000>; /* millicelsius */
>>> + hysteresis = <5000>; /* millicelsius */
>>> + type = "active";
>>> + };
>>> + cpu_crit0: cpu-crit-0 {
>>> + temperature = <120000>; /* millicelsius */
>>> + hysteresis = <0>; /* millicelsius */
>>> + type = "critical";
>>> + };
>>> + /*
>>> + * Exynos542x supports only 4 trip-points
>>> + * so for these polling mode is required.
>>> + * Start polling at temperature level of last
>>> + * interrupt-driven trip: cpu_alert2
>>> + */
>>> + cpu_alert3: cpu-alert-3 {
>>> + temperature = <70000>; /* millicelsius */
>>> + hysteresis = <10000>; /* millicelsius */
>>> + type = "passive";
>>> + };
>>> + cpu_alert4: cpu-alert-4 {
>>> + temperature = <85000>; /* millicelsius */
>>> + hysteresis = <10000>; /* millicelsius */
>>> + type = "passive";
>>> + };
>>> +
>>> + };
>>> + cooling-maps {
>>> + map0 {
>>> + trip = <&cpu_alert0>;
>>> + cooling-device = <&fan0 0 1>;
>>> + };
>>> + map1 {
>>> + trip = <&cpu_alert1>;
>>> + cooling-device = <&fan0 1 2>;
>>> + };
>>> + map2 {
>>> + trip = <&cpu_alert2>;
>>> + cooling-device = <&fan0 2 3>;
>>> + };
>>> + /*
>>> + * When reaching cpu_alert3, reduce CPU
>>> + * by 2 steps. On Exynos5422/5800 that would
>>> + * be: 1500 MHz and 1100 MHz.
>>> + */
>>> + map3 {
>>> + trip = <&cpu_alert3>;
>>> + cooling-device = <&cpu0 0 2>;
>>> + };
>>> + map4 {
>>> + trip = <&cpu_alert3>;
>>> + cooling-device = <&cpu4 0 2>;
>>> + };
>>> +
>>> + /*
>>> + * When reaching cpu_alert4, reduce CPU
>>> + * further, down to 600 MHz (11 steps for big,
>>> + * 7 steps for LITTLE).
>>> + */
>>> + map5 {
>>> + trip = <&cpu_alert4>;
>>> + cooling-device = <&cpu0 3 7>;
>>> + };
>>> + map6 {
>>> + trip = <&cpu_alert4>;
>>> + cooling-device = <&cpu4 3 11>;
>>> + };
>>> + };
>>> + };
>>> + };
>>> +
>>> };
>>>
>>> &bus_wcore {
>>> --
>>> 1.9.1
>>>
>>
>> Could you defer this patch, during my testing with pm-qa from linaro.
>>
>> git://git.linaro.org/tools/pm-qa.git
>>
>> When their is running of thermal test case cpu usage reaches around
>> 300+ percentage
>> and some time's the Odroid XU4 hang down.
>> -------------------------------------------------------------------------
>> [ 1028.056619] CPU4: shutdown
>> [ 1148.510372] IRQ54 no longer affine to CPU5
>> [ 1148.511864] CPU5: shutdown
>> [ 1268.921073] IRQ55 no longer affine to CPU6
>> [ 1268.922564] CPU6: shutdown
>> [ 1389.271930] cpu cpu4: Failed to find opp_table: -19
>> [ 1389.301668] IRQ56 no longer affine to CPU7
>> [ 1389.303132] CPU7: shutdown
>> [ 1510.538424] cpu cpu4: opp_list_debug_create_link: Failed to create link
>> [ 1510.543762] cpu cpu4: _add_opp_dev: Failed to register opp debugfs (-12)
>> [ 1510.550625] cpu cpu7: opp_list_debug_create_link: Failed to create link
>> [ 1510.557037] cpu cpu7: _add_opp_dev: Failed to register opp debugfs (-12)
>> [ 1510.664649] cpu cpu5: cpufreq_init: failed to get clk: -2
>> [ 1510.720567] cpu cpu6: cpufreq_init: failed to get clk: -2
>> [ 1510.788280] cpu cpu7: cpufreq_init: failed to get clk: -2
>> root at odroidxu4l:/home/odroid/study/linaro/pm-qa# killall heat_cpu
>>
>> -------------------------------------------------------------------------
>> And some time I observed that the board will poweroff on reaching
>> temperature 120 degree C.
>> when I am compiling the kernel with or above. make -j8
>> -------------------------------------------------------------------------
>> root at odroidxu4l:~# * Starting NTP server ntpd [ OK ]
>> saned disabled; edit /etc/default/saned
>> [ 4118.924470] thermal thermal_zone3: critical temperature reached(121
>> C),shutting down
>> [ 4119.014327] thermal thermal_zone3: critical temperature reached(121
>> C),shutting down
>>
>> Broadcast message from root at odroidxu4l
>> (unknown) at 20:41 ...
>>
>> The system is going down for power off NOW!
>>
>> Broadcast message from root at odroidxu4l
>> (unknown) at 20:41 ...
>>
>> The system is going down for power off NOW!
>> [ 4119.431386] thermal thermal_zone3: critical temperature reached(121
>> C),shutting down
>> [ 4120.206709] thermal thermal_zone3: critical temperature reached(120
>> C),shutting down
>>
>> Broadcast message from root at odroidxu4l
>> (unknown) at 20:41 ...
>>
>> The system is going down for power off NOW!
>> wait-for-state stop/waiting
>> [ 4157.574406] reboo
>>
>> U-Boot 2016.03-00665-g563d8d9-dirty (Apr 04 2016 - 22:27:07 +0930) for
>> ODROID-XU3
>>
>> CPU: Exynos5422 @ 800 MHz
>> Model: Odroid XU3 based on EXYNOS5422
>> Board: Odroid XU3 based on EXYNOS5422
>> Type: xu4
>> DRAM: 2 GiB
>> MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
>> *** Warning - bad CRC, using default environment
>> -------------------------------------------------------------------------
>> Once the thermal issue is fixed we can redo this changes.
>
> I am sorry but I do not understand.
> 1. Are you saying that my patch causes the issue?
> 2. Are you saying that I should not send some patches because of
> conflicting work? (that would be peculiar...)
> 3. Are you saying that I should not apply this patch to me tree because
> of conflicting work?
> 4. Other?
>
> Best regards.
> Krzysztof
>
>
Sorry for the confusion it's not about you patch.
The feature is not working correctly as per my testing with the
original source code.
It need to be more tuned or some other approach to the issue need to found.
Best Regards
-Anand Moon
More information about the linux-arm-kernel
mailing list