[PATCH 08/16] clk: sunxi-ng: Add M-factor clock support
Maxime Ripard
maxime.ripard at free-electrons.com
Sun May 8 13:01:43 PDT 2016
Introduce support for clocks that divide by a linear factor.
Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu_m.c | 135 ++++++++++++++++++++++++++++++++++++++++++
drivers/clk/sunxi-ng/ccu_m.h | 101 +++++++++++++++++++++++++++++++
3 files changed, 237 insertions(+)
create mode 100644 drivers/clk/sunxi-ng/ccu_m.c
create mode 100644 drivers/clk/sunxi-ng/ccu_m.h
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index a47a3bbdf285..f41de901c607 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -4,5 +4,6 @@ obj-y += ccu_reset.o
obj-y += ccu_div_table.o
obj-y += ccu_fixed_factor.o
obj-y += ccu_gate.o
+obj-y += ccu_m.o
obj-y += ccu_mux.o
obj-y += ccu_phase.o
diff --git a/drivers/clk/sunxi-ng/ccu_m.c b/drivers/clk/sunxi-ng/ccu_m.c
new file mode 100644
index 000000000000..424eb6da0d5b
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu_m.c
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 2016 Maxime Ripard
+ * Maxime Ripard <maxime.ripard at free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/clk-provider.h>
+
+#include "ccu_gate.h"
+#include "ccu_m.h"
+#include "ccu_mux.h"
+
+static void ccu_m_find_best(unsigned long parent, unsigned long rate,
+ unsigned int max_m, unsigned int *m)
+{
+ unsigned int _m = parent / rate;
+
+ if (_m > max_m)
+ _m = max_m;
+
+ *m = _m;
+}
+
+static unsigned long ccu_m_round_rate(struct ccu_mux_internal *mux,
+ unsigned long parent_rate,
+ unsigned long rate,
+ void *data)
+{
+ struct ccu_m *cm = data;
+ unsigned int m;
+
+ ccu_m_find_best(parent_rate, rate, 1 << cm->m.width, &m);
+
+ return parent_rate / m;
+}
+
+
+static void ccu_m_disable(struct clk_hw *hw)
+{
+ struct ccu_m *cm = hw_to_ccu_m(hw);
+
+ return ccu_gate_helper_disable(&cm->common, cm->enable);
+}
+
+static int ccu_m_enable(struct clk_hw *hw)
+{
+ struct ccu_m *cm = hw_to_ccu_m(hw);
+
+ return ccu_gate_helper_enable(&cm->common, cm->enable);
+}
+
+static int ccu_m_is_enabled(struct clk_hw *hw)
+{
+ struct ccu_m *cm = hw_to_ccu_m(hw);
+
+ return ccu_gate_helper_is_enabled(&cm->common, cm->enable);
+}
+
+static unsigned long ccu_m_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct ccu_m *cm = hw_to_ccu_m(hw);
+ unsigned long m;
+ u32 reg;
+
+ reg = readl(cm->common.base + cm->common.reg);
+
+ m = reg >> cm->m.shift;
+ m &= (1 << cm->m.width) - 1;
+
+ return parent_rate / (m + 1);
+}
+
+static int ccu_m_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ struct ccu_m *cm = hw_to_ccu_m(hw);
+
+ return ccu_mux_helper_determine_rate(&cm->common, &cm->mux,
+ req, ccu_m_round_rate, cm);
+}
+
+static int ccu_m_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct ccu_m *cm = hw_to_ccu_m(hw);
+ unsigned long flags;
+ unsigned int m;
+ u32 reg;
+
+ ccu_m_find_best(parent_rate, rate, 1 << cm->m.width, &m);
+
+ spin_lock_irqsave(cm->common.lock, flags);
+
+ reg = readl(cm->common.base + cm->common.reg);
+ reg &= ((1 << cm->m.width) - 1) << cm->m.shift;
+
+ writel(reg | ((m - 1) << cm->m.shift),
+ cm->common.base + cm->common.reg);
+
+ spin_unlock_irqrestore(cm->common.lock, flags);
+
+ return 0;
+}
+
+static u8 ccu_m_get_parent(struct clk_hw *hw)
+{
+ struct ccu_m *cm = hw_to_ccu_m(hw);
+
+ return ccu_mux_helper_get_parent(&cm->common, &cm->mux);
+}
+
+static int ccu_m_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct ccu_m *cm = hw_to_ccu_m(hw);
+
+ return ccu_mux_helper_set_parent(&cm->common, &cm->mux, index);
+}
+
+const struct clk_ops ccu_m_ops = {
+ .disable = ccu_m_disable,
+ .enable = ccu_m_enable,
+ .is_enabled = ccu_m_is_enabled,
+
+ .get_parent = ccu_m_get_parent,
+ .set_parent = ccu_m_set_parent,
+
+ .determine_rate = ccu_m_determine_rate,
+ .recalc_rate = ccu_m_recalc_rate,
+ .set_rate = ccu_m_set_rate,
+};
diff --git a/drivers/clk/sunxi-ng/ccu_m.h b/drivers/clk/sunxi-ng/ccu_m.h
new file mode 100644
index 000000000000..625c0a7cef43
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu_m.h
@@ -0,0 +1,101 @@
+/*
+ * Copyright (c) 2016 Maxime Ripard. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_M_H_
+#define _CCU_M_H_
+
+#include <linux/clk-provider.h>
+
+#include "ccu_common.h"
+#include "ccu_factor.h"
+#include "ccu_mux.h"
+
+struct ccu_m {
+ u32 enable;
+
+ struct ccu_factor m;
+ struct ccu_mux_internal mux;
+ struct ccu_common common;
+};
+
+#define SUNXI_CCU_M(_struct, _name, _parent, _reg, _mshift, _mwidth, \
+ _flags) \
+ struct ccu_m _struct = { \
+ .m = SUNXI_CLK_FACTOR(_mshift, _mwidth), \
+ .common = { \
+ .reg = _reg, \
+ .hw.init = SUNXI_HW_INIT(_name, \
+ _parent, \
+ &ccu_m_ops, \
+ _flags), \
+ }, \
+ }
+
+#define SUNXI_CCU_M_WITH_GATE(_struct, _name, _parent, _reg, \
+ _mshift, _mwidth, _gate, \
+ _flags) \
+ struct ccu_m _struct = { \
+ .enable = _gate, \
+ .m = SUNXI_CLK_FACTOR(_mshift, _mwidth), \
+ .common = { \
+ .reg = _reg, \
+ .features = CCU_FEATURE_GATE, \
+ .hw.init = SUNXI_HW_INIT(_name, \
+ _parent, \
+ &ccu_m_ops, \
+ _flags), \
+ }, \
+ }
+
+#define SUNXI_CCU_M_WITH_MUX(_struct, _name, _parents, _reg, \
+ _mshift, _mwidth, _muxshift, _muxwidth, \
+ _flags) \
+ struct ccu_m _struct = { \
+ .m = SUNXI_CLK_FACTOR(_mshift, _mwidth), \
+ .mux = SUNXI_CLK_MUX(_muxshift, _muxwidth), \
+ .common = { \
+ .reg = _reg, \
+ .hw.init = SUNXI_HW_INIT_PARENTS(_name, \
+ _parents, \
+ &ccu_m_ops, \
+ _flags), \
+ }, \
+ }
+
+#define SUNXI_CCU_M_WITH_MUX_GATE(_struct, _name, _parents, _reg, \
+ _mshift, _mwidth, _muxshift, _muxwidth, \
+ _gate, _flags) \
+ struct ccu_m _struct = { \
+ .enable = _gate, \
+ .m = SUNXI_CLK_FACTOR(_mshift, _mwidth), \
+ .mux = SUNXI_CLK_MUX(_muxshift, _muxwidth), \
+ .common = { \
+ .reg = _reg, \
+ .features = CCU_FEATURE_GATE, \
+ .hw.init = SUNXI_HW_INIT_PARENTS(_name, \
+ _parents, \
+ &ccu_m_ops, \
+ _flags), \
+ }, \
+ }
+
+static inline struct ccu_m *hw_to_ccu_m(struct clk_hw *hw)
+{
+ struct ccu_common *common = hw_to_ccu_common(hw);
+
+ return container_of(common, struct ccu_m, common);
+}
+
+extern const struct clk_ops ccu_m_ops;
+
+#endif /* _CCU_M_H_ */
--
2.8.2
More information about the linux-arm-kernel
mailing list