[PATCH v2 1/2] Documentation: DT: bindings: Add Broadcom STB PCIe bindings

[Florian Fainelli]

From: Jim Quinlan <jim2101024 at gmail.com>

This patchs adds the Device Tree bindings for the Broadcom STB PCIe root
complex hardware.

Signed-off-by: Jim Quinlan <jim2101024 at gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
---
Changes in v2:

- rewrite the binding document almost from scratch to include many more
  references to existing documents
- describe missing properties
- give better examples

 .../devicetree/bindings/pci/brcm,brcmstb-pcie.txt  | 98 ++++++++++++++++++++++
 1 file changed, 98 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/brcm,brcmstb-pcie.txt

diff --git a/Documentation/devicetree/bindings/pci/brcm,brcmstb-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,brcmstb-pcie.txt
new file mode 100644
index 000000000000..3682b0f0bc26
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/brcm,brcmstb-pcie.txt
@@ -0,0 +1,98 @@
+Broadcom STB PCIe Host Controller Device Tree Bindings
+
+This document describes the binding of the PCIe Root Complex hardware found in
+Broadcom Set Top Box System-on-Chips such as BCM7425 (MIPS), BCM7435 (MIPS) and
+BCM7445 (ARMv7).
+
+Required properties:
+- compatible: must be one of: "brcm,bcm7425-pcie"
+			      "brcm,bcm7435-pcie"
+			      "brcm,bcm7445-pcie"
+
+- reg: specifies the physical base address of the controller registers and
+  its length
+
+- interrupt-parent: must be a reference (phandle) to the parent interrupt
+  controller in the system (7038-l1-intc on MIPS, GIC on ARM/ARM64)
+
+- interrrupts: first interrupt must be the Level 1 interrupt number corresponding
+  to the main PCIe RC interrupt, second interrupt must be the MSI interrupt
+  See the interrupt-parent documentation for the number of cells and their meaning:
+  MIPS: Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
+  ARM/ARM64: Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
+
+- interrupt-names: must be "pcie", and if present "msi"
+
+- interrupt-map: see pci.txt
+
+- interrupt-map-mask: see pci.txt
+
+- #address-cells: must be set to <3>, see pci.txt
+
+- #size-cells: must be set to <2>, see pci.txt
+
+- ranges: ranges for the PCI outbound windows, no I/O or prefetchable windows
+  must be specified here, only non-prefetchable. 32-bits windows or 64-bits
+  windows are allowed based on the host processor's capabilities (ARM w/ LPAE,
+  ARM64).
+
+- #interrupt-cells: set to <1>, see pci.txt
+
+- brcm,log2-scb-sizes: log2 size of the SCB window that is mapped to PCIe space
+  there must be exactly one value per memory controller present in the system
+  (ranges from 1 to 3)
+
+Optional properties:
+
+- msi-controller: indicates that this is a MSI controller node (when supported)
+
+- clocks: phandle to the functional clock that feeds into the PCIe RC block
+
+- clock-names: the name(s) of the clocks specified in 'clocks'.  Note
+  that if the 'clocks' property is given, 'clock-names' is mandatory,
+  and the name of the clock is expected to be "pcie".
+
+- brcm,ssc: boolean that indicates usage of spread-spectrum clocking
+
+- brcm,gen: integer that indicates desired forced generation of link: 1 => 2.5
+  Gbps, 2 => 5.0 Gbps, 3 => 8.0 Gbps. Will override the auto-negotation if
+  specified.
+
+- <*>-supply: see Documentation/devicetree/bindings/regulator/regulator.txt
+
+- <*>-supply-names: see Documentation/devicetree/bindings/regulator/regulator.txt
+
+Example Node:
+
+This example assumes that the top-level #address-cells = <2> and #size-cells =
+<2>, e.g: ARM LPAE configuration.
+
+	pcie0: pcie-controller at f0460000 {
+		reg = <0x0 0xf0460000 0x0 0x9310>;
+		interrupts = <0x0 0x33 0x4>, <0x0 0x34, 0x4>;
+		interrupt-names = "pcie", "msi";
+		compatible = "brcm,bcm7445-pcie";
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		/* Two non-prefetchable 32-bits memory space, each of 128MB
+ 		 * with the following mapping:
+		 * PCIe address		=> CPU physical address space
+		 * 0x00_0000_0000	=> 0x00_C000_0000
+		 * 0x00_0800_0000	=> 0x00_C800_0000
+		 */
+		ranges = <0x02000000 0x00000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x08000000>,
+			 <0x02000000 0x00000000 0x08000000 0x00000000 0xc8000000 0x00000000 0x08000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &intc 47 3
+				 0 0 0 2 &intc 48 3
+				 0 0 0 3 &intc 49 3
+				 0 0 0 4 &intc 50 3>;
+		clocks = <&pcie0>;
+		clock-names = "pcie";
+		brcm,ssc;
+		brcm,log2-scb-sizes = <0x1e 0x1e 0x1e>;
+		vreg-wifi-pwr-supply-names = "vreg-wifi-pwr";
+		vreg-wifi-pwr-supply = <&vreg-wifi-pwr>;
+	};
-- 
2.1.0