[PATCH RFC] Watchdog: sbsa_gwdt: Enhance timeout range

[Guenter Roeck]

On Wed, May 04, 2016 at 11:17:29AM -0500, Timur Tabi wrote:
> Pratyush Anand wrote:
> >Its unique to SBSA because you have very little timeout here. kexec-tools
> >upstream does not have any mechanism to handle watchdog timeout. Lets say even
> >if we implement a framework there, the best it can do is to ping the watchdog
> >again.
> 
> Ok, so it's more accurate to say that kexec has a minimum watchdog timeout
> requirement.  What happens if the system admin sets the timeout to 5 seconds
> arbitrarily?  The system will reset during kexec, no matter which hardware
> is used.
> 
> This still sounds like a band-aid to me.  We're just assuming that we need a
> timeout of at least 20 seconds to support kexec.  Frankly, this still sounds
> like a problem the kexec developers needs to acknowledge and deal with.
> 
> Still I'm okay with a patch that extends the timeout by programming WCV, but
> it has to be commented as a hack specifically to support kexec because the
> timeout might be too short.  Then Wim can decide whether he supports such
> changes.
> 
I don't even understand how kexec-tools is involved in the first place.
kexec-tools sounds like user space, which should execute _after_ the kernel
and its modules are loaded (assuming modules are loaded from initramfs).
If kexec-tools can somehow ping the watchdog (presumably by writing into
the HW directly), I don't understand why it doesn't simply load the watchdog
driver instead and let the watchdog core handle the heartbeats.

I am really missing something here. How can kexec-tools do anything before
the kernel is loaded ?

Guenter