[PATCH v6 08/11] arm: dts: apq8064: Add thermal zones, tsens and qfprom nodes

Rajendra Nayak rnayak at codeaurora.org
Thu May 5 01:51:46 PDT 2016


TSENS is part of GCC, hence add TSENS properties as part of GCC node.
Also add thermal zones and qfprom nodes.
Update GCC bindings doc to mention the possibility of optional TSENS
properties that can be part of GCC node.

Cc: Andy Gross <agross at codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak at codeaurora.org>
---
 .../devicetree/bindings/clock/qcom,gcc.txt         |  18 ++++
 arch/arm/boot/dts/qcom-apq8064.dtsi                | 103 +++++++++++++++++++++
 2 files changed, 121 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
index 9a60fde..16e2f84 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
@@ -23,6 +23,13 @@ Required properties :
 Optional properties :
 - #power-domain-cells : shall contain 1
 
+Optional properties:
+- Qualcomm TSENS (thermal sensor device) on some devices can
+be part of GCC and hence the TSENS properties can also be
+part of the GCC/clock-controller node.
+For more details on the TSENS properties please refer
+Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+
 Example:
 	clock-controller at 900000 {
 		compatible = "qcom,gcc-msm8960";
@@ -31,3 +38,14 @@ Example:
 		#reset-cells = <1>;
 		#power-domain-cells = <1>;
 	};
+
+Example of GCC with TSENS properties:
+	clock-controller at 900000 {
+		compatible = "qcom,gcc-apq8064";
+		reg = <0x00900000 0x4000>;
+		nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+		nvmem-cell-names = "calib", "calib_backup";
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		#thermal-sensor-cells = <1>;
+	};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 65d0e8d..4f839b0 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -86,6 +86,92 @@
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 7>;
+			coefficients = <1199 0>;
+
+			trips {
+				cpu_alert0: trip at 0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip at 1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 8>;
+			coefficients = <1132 0>;
+
+			trips {
+				cpu_alert1: trip at 0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip at 1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 9>;
+			coefficients = <1199 0>;
+
+			trips {
+				cpu_alert2: trip at 0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip at 1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 10>;
+			coefficients = <1132 0>;
+
+			trips {
+				cpu_alert3: trip at 0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip at 1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
 		interrupts = <1 10 0x304>;
@@ -481,11 +567,28 @@
 			};
 		};
 
+		qfprom: qfprom at 00700000 {
+			compatible	= "qcom,qfprom";
+			reg		= <0x00700000 0x1000>;
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			ranges;
+			tsens_calib: calib {
+				reg = <0x404 0x10>;
+			};
+			tsens_backup: backup_calib {
+				reg = <0x414 0x10>;
+			};
+		};
+
 		gcc: clock-controller at 900000 {
 			compatible = "qcom,gcc-apq8064";
 			reg = <0x00900000 0x4000>;
+			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+			nvmem-cell-names = "calib", "calib_backup";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+			#thermal-sensor-cells = <1>;
 		};
 
 		lcc: clock-controller at 28000000 {
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation




More information about the linux-arm-kernel mailing list