[PATCH v6 03/11] thermal: qcom: tsens-8974: Add support for 8974 family of SoCs
Rajendra Nayak
rnayak at codeaurora.org
Thu May 5 01:51:41 PDT 2016
Add .calibrate support for 8974 family as part of tsens_ops.
Based on the original code by Siddartha Mohanadoss and Stephen Boyd.
Signed-off-by: Rajendra Nayak <rnayak at codeaurora.org>
---
drivers/thermal/qcom/Makefile | 2 +-
drivers/thermal/qcom/tsens-8974.c | 244 ++++++++++++++++++++++++++++++++++++++
drivers/thermal/qcom/tsens.c | 1 +
drivers/thermal/qcom/tsens.h | 2 +-
4 files changed, 247 insertions(+), 2 deletions(-)
create mode 100644 drivers/thermal/qcom/tsens-8974.c
diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
index 05c98e4..a471100 100644
--- a/drivers/thermal/qcom/Makefile
+++ b/drivers/thermal/qcom/Makefile
@@ -1,2 +1,2 @@
obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o
-qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o
+qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o
diff --git a/drivers/thermal/qcom/tsens-8974.c b/drivers/thermal/qcom/tsens-8974.c
new file mode 100644
index 0000000..da3ca4c
--- /dev/null
+++ b/drivers/thermal/qcom/tsens-8974.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include "tsens.h"
+
+/* eeprom layout data for 8974 */
+#define BASE1_MASK 0xff
+#define S0_P1_MASK 0x3f00
+#define S1_P1_MASK 0xfc000
+#define S2_P1_MASK 0x3f00000
+#define S3_P1_MASK 0xfc000000
+#define S4_P1_MASK 0x3f
+#define S5_P1_MASK 0xfc0
+#define S6_P1_MASK 0x3f000
+#define S7_P1_MASK 0xfc0000
+#define S8_P1_MASK 0x3f000000
+#define S8_P1_MASK_BKP 0x3f
+#define S9_P1_MASK 0x3f
+#define S9_P1_MASK_BKP 0xfc0
+#define S10_P1_MASK 0xfc0
+#define S10_P1_MASK_BKP 0x3f000
+#define CAL_SEL_0_1 0xc0000000
+#define CAL_SEL_2 0x40000000
+#define CAL_SEL_SHIFT 30
+#define CAL_SEL_SHIFT_2 28
+
+#define S0_P1_SHIFT 8
+#define S1_P1_SHIFT 14
+#define S2_P1_SHIFT 20
+#define S3_P1_SHIFT 26
+#define S5_P1_SHIFT 6
+#define S6_P1_SHIFT 12
+#define S7_P1_SHIFT 18
+#define S8_P1_SHIFT 24
+#define S9_P1_BKP_SHIFT 6
+#define S10_P1_SHIFT 6
+#define S10_P1_BKP_SHIFT 12
+
+#define BASE2_SHIFT 12
+#define BASE2_BKP_SHIFT 18
+#define S0_P2_SHIFT 20
+#define S0_P2_BKP_SHIFT 26
+#define S1_P2_SHIFT 26
+#define S2_P2_BKP_SHIFT 6
+#define S3_P2_SHIFT 6
+#define S3_P2_BKP_SHIFT 12
+#define S4_P2_SHIFT 12
+#define S4_P2_BKP_SHIFT 18
+#define S5_P2_SHIFT 18
+#define S5_P2_BKP_SHIFT 24
+#define S6_P2_SHIFT 24
+#define S7_P2_BKP_SHIFT 6
+#define S8_P2_SHIFT 6
+#define S8_P2_BKP_SHIFT 12
+#define S9_P2_SHIFT 12
+#define S9_P2_BKP_SHIFT 18
+#define S10_P2_SHIFT 18
+#define S10_P2_BKP_SHIFT 24
+
+#define BASE2_MASK 0xff000
+#define BASE2_BKP_MASK 0xfc0000
+#define S0_P2_MASK 0x3f00000
+#define S0_P2_BKP_MASK 0xfc000000
+#define S1_P2_MASK 0xfc000000
+#define S1_P2_BKP_MASK 0x3f
+#define S2_P2_MASK 0x3f
+#define S2_P2_BKP_MASK 0xfc0
+#define S3_P2_MASK 0xfc0
+#define S3_P2_BKP_MASK 0x3f000
+#define S4_P2_MASK 0x3f000
+#define S4_P2_BKP_MASK 0xfc0000
+#define S5_P2_MASK 0xfc0000
+#define S5_P2_BKP_MASK 0x3f000000
+#define S6_P2_MASK 0x3f000000
+#define S6_P2_BKP_MASK 0x3f
+#define S7_P2_MASK 0x3f
+#define S7_P2_BKP_MASK 0xfc0
+#define S8_P2_MASK 0xfc0
+#define S8_P2_BKP_MASK 0x3f000
+#define S9_P2_MASK 0x3f000
+#define S9_P2_BKP_MASK 0xfc0000
+#define S10_P2_MASK 0xfc0000
+#define S10_P2_BKP_MASK 0x3f000000
+
+#define BKP_SEL 0x3
+#define BKP_REDUN_SEL 0xe0000000
+#define BKP_REDUN_SHIFT 29
+
+#define BIT_APPEND 0x3
+
+static int calibrate_8974(struct tsens_device *tmdev)
+{
+ int base1 = 0, base2 = 0, i;
+ u32 p1[11], p2[11];
+ int mode = 0;
+ u32 *calib, *bkp;
+ u32 calib_redun_sel;
+
+ calib = (u32 *)qfprom_read(tmdev->dev, "calib");
+ if (IS_ERR(calib))
+ return PTR_ERR(calib);
+
+ bkp = (u32 *)qfprom_read(tmdev->dev, "calib_backup");
+ if (IS_ERR(bkp))
+ return PTR_ERR(bkp);
+
+ calib_redun_sel = bkp[1] & BKP_REDUN_SEL;
+ calib_redun_sel >>= BKP_REDUN_SHIFT;
+
+ if (calib_redun_sel == BKP_SEL) {
+ mode = (calib[4] & CAL_SEL_0_1) >> CAL_SEL_SHIFT;
+ mode |= (calib[5] & CAL_SEL_2) >> CAL_SEL_SHIFT_2;
+
+ switch (mode) {
+ case TWO_PT_CALIB:
+ base2 = (bkp[2] & BASE2_BKP_MASK) >> BASE2_BKP_SHIFT;
+ p2[0] = (bkp[2] & S0_P2_BKP_MASK) >> S0_P2_BKP_SHIFT;
+ p2[1] = (bkp[3] & S1_P2_BKP_MASK);
+ p2[2] = (bkp[3] & S2_P2_BKP_MASK) >> S2_P2_BKP_SHIFT;
+ p2[3] = (bkp[3] & S3_P2_BKP_MASK) >> S3_P2_BKP_SHIFT;
+ p2[4] = (bkp[3] & S4_P2_BKP_MASK) >> S4_P2_BKP_SHIFT;
+ p2[5] = (calib[4] & S5_P2_BKP_MASK) >> S5_P2_BKP_SHIFT;
+ p2[6] = (calib[5] & S6_P2_BKP_MASK);
+ p2[7] = (calib[5] & S7_P2_BKP_MASK) >> S7_P2_BKP_SHIFT;
+ p2[8] = (calib[5] & S8_P2_BKP_MASK) >> S8_P2_BKP_SHIFT;
+ p2[9] = (calib[5] & S9_P2_BKP_MASK) >> S9_P2_BKP_SHIFT;
+ p2[10] = (calib[5] & S10_P2_BKP_MASK) >> S10_P2_BKP_SHIFT;
+ /* Fall through */
+ case ONE_PT_CALIB:
+ case ONE_PT_CALIB2:
+ base1 = bkp[0] & BASE1_MASK;
+ p1[0] = (bkp[0] & S0_P1_MASK) >> S0_P1_SHIFT;
+ p1[1] = (bkp[0] & S1_P1_MASK) >> S1_P1_SHIFT;
+ p1[2] = (bkp[0] & S2_P1_MASK) >> S2_P1_SHIFT;
+ p1[3] = (bkp[0] & S3_P1_MASK) >> S3_P1_SHIFT;
+ p1[4] = (bkp[1] & S4_P1_MASK);
+ p1[5] = (bkp[1] & S5_P1_MASK) >> S5_P1_SHIFT;
+ p1[6] = (bkp[1] & S6_P1_MASK) >> S6_P1_SHIFT;
+ p1[7] = (bkp[1] & S7_P1_MASK) >> S7_P1_SHIFT;
+ p1[8] = (bkp[2] & S8_P1_MASK_BKP) >> S8_P1_SHIFT;
+ p1[9] = (bkp[2] & S9_P1_MASK_BKP) >> S9_P1_BKP_SHIFT;
+ p1[10] = (bkp[2] & S10_P1_MASK_BKP) >> S10_P1_BKP_SHIFT;
+ break;
+ }
+ } else {
+ mode = (calib[1] & CAL_SEL_0_1) >> CAL_SEL_SHIFT;
+ mode |= (calib[3] & CAL_SEL_2) >> CAL_SEL_SHIFT_2;
+
+ switch (mode) {
+ case TWO_PT_CALIB:
+ base2 = (calib[2] & BASE2_MASK) >> BASE2_SHIFT;
+ p2[0] = (calib[2] & S0_P2_MASK) >> S0_P2_SHIFT;
+ p2[1] = (calib[2] & S1_P2_MASK) >> S1_P2_SHIFT;
+ p2[2] = (calib[3] & S2_P2_MASK);
+ p2[3] = (calib[3] & S3_P2_MASK) >> S3_P2_SHIFT;
+ p2[4] = (calib[3] & S4_P2_MASK) >> S4_P2_SHIFT;
+ p2[5] = (calib[3] & S5_P2_MASK) >> S5_P2_SHIFT;
+ p2[6] = (calib[3] & S6_P2_MASK) >> S6_P2_SHIFT;
+ p2[7] = (calib[4] & S7_P2_MASK);
+ p2[8] = (calib[4] & S8_P2_MASK) >> S8_P2_SHIFT;
+ p2[9] = (calib[4] & S9_P2_MASK) >> S9_P2_SHIFT;
+ p2[10] = (calib[4] & S10_P2_MASK) >> S10_P2_SHIFT;
+ /* Fall through */
+ case ONE_PT_CALIB:
+ case ONE_PT_CALIB2:
+ base1 = calib[0] & BASE1_MASK;
+ p1[0] = (calib[0] & S0_P1_MASK) >> S0_P1_SHIFT;
+ p1[1] = (calib[0] & S1_P1_MASK) >> S1_P1_SHIFT;
+ p1[2] = (calib[0] & S2_P1_MASK) >> S2_P1_SHIFT;
+ p1[3] = (calib[0] & S3_P1_MASK) >> S3_P1_SHIFT;
+ p1[4] = (calib[1] & S4_P1_MASK);
+ p1[5] = (calib[1] & S5_P1_MASK) >> S5_P1_SHIFT;
+ p1[6] = (calib[1] & S6_P1_MASK) >> S6_P1_SHIFT;
+ p1[7] = (calib[1] & S7_P1_MASK) >> S7_P1_SHIFT;
+ p1[8] = (calib[1] & S8_P1_MASK) >> S8_P1_SHIFT;
+ p1[9] = (calib[2] & S9_P1_MASK);
+ p1[10] = (calib[2] & S10_P1_MASK) >> S10_P1_SHIFT;
+ break;
+ }
+ }
+
+ switch (mode) {
+ case ONE_PT_CALIB:
+ for (i = 0; i < tmdev->num_sensors; i++)
+ p1[i] += (base1 << 2) | BIT_APPEND;
+ break;
+ case TWO_PT_CALIB:
+ for (i = 0; i < tmdev->num_sensors; i++) {
+ p2[i] += base2;
+ p2[i] <<= 2;
+ p2[i] |= BIT_APPEND;
+ }
+ /* Fall through */
+ case ONE_PT_CALIB2:
+ for (i = 0; i < tmdev->num_sensors; i++) {
+ p1[i] += base1;
+ p1[i] <<= 2;
+ p1[i] |= BIT_APPEND;
+ }
+ break;
+ default:
+ for (i = 0; i < tmdev->num_sensors; i++)
+ p2[i] = 780;
+ p1[0] = 502;
+ p1[1] = 509;
+ p1[2] = 503;
+ p1[3] = 509;
+ p1[4] = 505;
+ p1[5] = 509;
+ p1[6] = 507;
+ p1[7] = 510;
+ p1[8] = 508;
+ p1[9] = 509;
+ p1[10] = 508;
+ break;
+ }
+
+ compute_intercept_slope(tmdev, p1, p2, mode);
+
+ return 0;
+}
+
+const struct tsens_ops ops_8974 = {
+ .init = init_common,
+ .calibrate = calibrate_8974,
+ .get_temp = get_temp_common,
+};
+
+const struct tsens_data data_8974 = {
+ .num_sensors = 11,
+ .ops = &ops_8974,
+};
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 7f3dfa1..5f206e3 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -68,6 +68,7 @@ static const struct of_device_id tsens_table[] = {
.data = &data_8916,
}, {
.compatible = "qcom,msm8974-tsens",
+ .data = &data_8974,
},
{}
};
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index e767ad5..8ab9997 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -87,6 +87,6 @@ void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32);
int init_common(struct tsens_device *);
int get_temp_common(struct tsens_device *, int, int *);
-extern const struct tsens_data data_8916;
+extern const struct tsens_data data_8916, data_8974;
#endif /* __QCOM_TSENS_H__ */
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
More information about the linux-arm-kernel
mailing list