[PATCH v2] irqchip/gic-v2m: Add workaround for Broadcom NS2 GICv2m erratum

[Marc Zyngier]

On 05/05/16 00:47, Ray Jui wrote:
> Alex Barba <alex.barba at broadcom.com> discovered Broadcom NS2 GICv2m
> implementation has an erratum where the MSI data needs to be the SPI
> number subtracted by an offset of 32, for the correct MSI interrupt
> to be triggered.
> 
> Here we are adding the workaround based on readings from the MSI_IIDR
> register, which contains a value unique to Broadcom NS2 GICv2m
> 
> Reported-by: Alex Barba <alex.barba at broadcom.com>
> Signed-off-by: Ray Jui <ray.jui at broadcom.com>
> ---
>  drivers/irqchip/irq-gic-v2m.c | 17 +++++++++++++++--
>  1 file changed, 15 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/irqchip/irq-gic-v2m.c b/drivers/irqchip/irq-gic-v2m.c
> index 28f047c..4c89e27 100644
> --- a/drivers/irqchip/irq-gic-v2m.c
> +++ b/drivers/irqchip/irq-gic-v2m.c
> @@ -49,6 +49,9 @@
>  /* APM X-Gene with GICv2m MSI_IIDR register value */
>  #define XGENE_GICV2M_MSI_IIDR		0x06000170
>  
> +/* Broadcom NS2 GICv2m MSI_IIDR register value */
> +#define BCM_NS2_GICV2M_MSI_IIDR		0x0000013f
> +
>  /* List of flags for specific v2m implementation */
>  #define GICV2M_NEEDS_SPI_OFFSET		0x00000001
>  
> @@ -62,6 +65,7 @@ struct v2m_data {
>  	void __iomem *base;	/* GICv2m virt address */
>  	u32 spi_start;		/* The SPI number that MSIs start */
>  	u32 nr_spis;		/* The number of SPIs for MSIs */
> +	u32 spi_offset;		/* offset to be subtracted from SPI number */
>  	unsigned long *bm;	/* MSI vector bitmap */
>  	u32 flags;		/* v2m flags for specific implementation */
>  };
> @@ -102,7 +106,7 @@ static void gicv2m_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
>  	msg->data = data->hwirq;
>  
>  	if (v2m->flags & GICV2M_NEEDS_SPI_OFFSET)
> -		msg->data -= v2m->spi_start;
> +		msg->data -= v2m->spi_offset;
>  }
>  
>  static struct irq_chip gicv2m_irq_chip = {
> @@ -340,9 +344,18 @@ static int __init gicv2m_init_one(struct fwnode_handle *fwnode,
>  	 * different from the standard GICv2m implementation where
>  	 * the MSI data is the absolute value within the range from
>  	 * spi_start to (spi_start + num_spis).
> +	 *
> +	 * Broadom NS2 GICv2m implementation has an erratum where the MSI data
> +	 * is 'spi_number - 32'
>  	 */
> -	if (readl_relaxed(v2m->base + V2M_MSI_IIDR) == XGENE_GICV2M_MSI_IIDR)
> +	if (readl_relaxed(v2m->base + V2M_MSI_IIDR) == XGENE_GICV2M_MSI_IIDR) {
> +		v2m->flags |= GICV2M_NEEDS_SPI_OFFSET;
> +		v2m->spi_offset = v2m->spi_start;
> +	} else if (readl_relaxed(v2m->base + V2M_MSI_IIDR) ==
> +		   BCM_NS2_GICV2M_MSI_IIDR) {
>  		v2m->flags |= GICV2M_NEEDS_SPI_OFFSET;
> +		v2m->spi_offset = 32;
> +	}

Can we make this a bit less ugly?

	switch (readl_relaxed(v2m->base + V2M_MSI_IIDR)) {
	case XGENE_GICV2M_MSI_IIDR:
		v2m->flags |= GICV2M_NEEDS_SPI_OFFSET;
		v2m->spi_offset = v2m->spi_start;
		break;
	case BCM_NS2_GICV2M_MSI_IIDR:
		v2m->flags |= GICV2M_NEEDS_SPI_OFFSET;
		v2m->spi_offset = 32;
		break;
	}

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...