[PATCH V2] iommu/arm-smmu: clear cache lock bit of ACR

[Robin Murphy]

On 03/05/16 14:50, Peng Fan wrote:
> According MMU-500r2 TRM, section 3.7.1 Auxiliary Control registers,
> You can modify ACTLR only when the ACR.CACHE_LOCK bit is 0.
>
> So before clearing ARM_MMU500_ACTLR_CPRE of each context bank,
> need clear CACHE_LOCK bit of ACR register first.
>
> Since CACHE_LOCK bit is only present in MMU-500r2 onwards,
> need to check the major number of IDR7.
>
> Signed-off-by: Peng Fan <van.freenix at gmail.com>
> Cc: Will Deacon <will.deacon at arm.com>
> Cc: Robin Murphy <robin.murphy at arm.com>
> ---
>
> V2:
>   Following Robin's comments, need to check IDR7 before clearing
>   CACHE_LOCK bit of ACR.
>
> V1:
>   Patch based on iommu/devel
>
>   drivers/iommu/arm-smmu.c | 23 ++++++++++++++++++++++-
>   1 file changed, 22 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
> index acff332..c7ad23e 100644
> --- a/drivers/iommu/arm-smmu.c
> +++ b/drivers/iommu/arm-smmu.c
> @@ -98,6 +98,9 @@
>   #define sCR0_BSU_SHIFT			14
>   #define sCR0_BSU_MASK			0x3
>
> +/* Auxiliary Configuration register */
> +#define ARM_SMMU_GR0_sACR		0x10
> +
>   /* Identification registers */
>   #define ARM_SMMU_GR0_ID0		0x20
>   #define ARM_SMMU_GR0_ID1		0x24
> @@ -144,6 +147,9 @@
>   #define ID2_PTFS_64K			(1 << 14)
>   #define ID2_VMID16			(1 << 15)
>
> +#define ID7_MAJOR_SHIFT			4
> +#define ID7_MAJOR_MASK			0xf
> +
>   /* Global TLB invalidation */
>   #define ARM_SMMU_GR0_TLBIVMID		0x64
>   #define ARM_SMMU_GR0_TLBIALLNSNH	0x68
> @@ -235,6 +241,8 @@
>
>   #define ARM_MMU500_ACTLR_CPRE		(1 << 1)
>
> +#define ARM_MMU500_ACR_CACHE_LOCK	(1 << 26)
> +
>   #define CB_PAR_F			(1 << 0)
>
>   #define ATSR_ACTIVE			(1 << 0)
> @@ -1493,7 +1501,7 @@ static void arm_smmu_device_reset(struct arm_smmu_device *smmu)
>   	void __iomem *gr0_base = ARM_SMMU_GR0(smmu);
>   	void __iomem *cb_base;
>   	int i = 0;
> -	u32 reg;
> +	u32 reg, major;
>
>   	/* clear global FSR */
>   	reg = readl_relaxed(ARM_SMMU_GR0_NS(smmu) + ARM_SMMU_GR0_sGFSR);
> @@ -1506,6 +1514,19 @@ static void arm_smmu_device_reset(struct arm_smmu_device *smmu)
>   		writel_relaxed(reg, gr0_base + ARM_SMMU_GR0_S2CR(i));
>   	}
>
> +	/*
> +	 * Before clearing ARM_MMU500_ACTLR_CPRE, need to
> +	 * clear CACHE_LOCK bit of ACR first. And, CACHE_LOCK
> +	 * bit is only present in MMU-500r2 onwards.
> +	 */
> +	reg = readl_relaxed(gr0_base + ARM_SMMU_GR0_ID7);
> +	major = (reg >> ID7_MAJOR_SHIFT) & ID7_MAJOR_MASK;
> +	if ((smmu->model == ARM_MMU500) && (major >= 2)) {
> +		reg = readl_relaxed(gr0_base + ARM_SMMU_GR0_sACR);
> +		reg &= ~ARM_MMU500_ACR_CACHE_LOCK;
> +		writel_relaxed(reg, gr0_base + ARM_SMMU_GR0_sACR);
> +	}
> +

I'd have been inclined to make the ID reg read conditional on ARM_MMU500 
as well, but this way is marginally more compact, and it's not like 
we're in a frequently-used hot path anyway.

Reviewed-by: Robin Murphy <robin.murphy at arm.com>

Thanks,
Robin.

>   	/* Make sure all context banks are disabled and clear CB_FSR  */
>   	for (i = 0; i < smmu->num_context_banks; ++i) {
>   		cb_base = ARM_SMMU_CB_BASE(smmu) + ARM_SMMU_CB(smmu, i);
>