[GIT PULL 3/6] i.MX device tree updates for 4.7, take 2
Shawn Guo
shawnguo at kernel.org
Tue May 3 08:58:03 PDT 2016
Hi arm-soc folks,
This is the second round of my imx/dt branch pull request. It's based
on the first take [1], which has been pulled some days ago.
Please pull, thanks.
Shawn
[1] http://thread.gmane.org/gmane.linux.ports.arm.kernel/493365
The following changes since commit 880e1509db9732d5696d2a092e9bd61d80ad00be:
ARM: dts: imx6qdl-udoo: add 7 inch LCD touchscreen panel support (2016-04-18 12:54:21 +0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-4.7-2
for you to fetch changes up to 194521f72380d0e78caa71013e9e7de1703d8c85:
ARM: mx5: dts: Enable USB OTG on M53EVK (2016-05-03 21:10:11 +0800)
----------------------------------------------------------------
The i.MX device tree updates for 4.7, take 2:
- Update display clock configuration for imx6q-b850v3 board
- Use watchdog external reset for imx6q-ba16 board
- Update operating points settings for i.MX6UL/SX/DL
- New board support: imx6ul-pico-hobbit and imx6q-marsboard
- Add SAI audio support for imx6ul-14x14-evk board
- Enable USB OTG support for M53EVK board
- A couple of fixes on DTC warnings
----------------------------------------------------------------
Akshay Bhat (4):
ARM: dts: imx6q-b850v3: Remove ldb panel
ARM: dts: imx6q-b850v3: Update display clock source
ARM: dts: imx: b450/b650v3: Move ldb_di clk assignment
ARM: dts: imx6q-ba16: use wdog external reset
Fabio Estevam (9):
ARM: dts: imx6ul: Fix operating points
ARM: dts: imx6sx: Add 198MHz operating point
ARM: dts: imx6dl: Fix the VDD_ARM_CAP voltage for 396MHz operation
ARM: dts: imx6: Do not hardcode the CLKO clock
ARM: dts: imx6ul-pico-hobbit: Add initial support
ARM: dts: imx28-m28: Remove unneeded partition nodes
ARM: dts: imx6sx-sdb: Add 198MHz operational point
ARM: dts: imx6qdl: Remove unneeded unit-addresses
ARM: dts: imx6ul-14x14-evk: Add audio support
Joshua Clayton (1):
ARM: dts: imx6: fix dtc warnings for ipu endpoints
Marcel Ziswiler (1):
ARM: dts: imx6: apalis: parallel lcd display support on ixora
Marek Vasut (1):
ARM: mx5: dts: Enable USB OTG on M53EVK
Sergio Prado (1):
ARM: dts: imx6: Add dts for Embest MarS Board
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/imx28-m28.dtsi | 26 --
arch/arm/boot/dts/imx53-m53evk.dts | 21 +-
arch/arm/boot/dts/imx6dl-riotboard.dts | 2 +-
arch/arm/boot/dts/imx6dl.dtsi | 2 +-
arch/arm/boot/dts/imx6q-apalis-ixora.dts | 45 +++
arch/arm/boot/dts/imx6q-b450v3.dts | 5 +-
arch/arm/boot/dts/imx6q-b650v3.dts | 5 +-
arch/arm/boot/dts/imx6q-b850v3.dts | 33 +-
arch/arm/boot/dts/imx6q-ba16.dtsi | 1 +
arch/arm/boot/dts/imx6q-gw5400-a.dts | 2 +-
arch/arm/boot/dts/imx6q-marsboard.dts | 403 +++++++++++++++++++++
arch/arm/boot/dts/imx6q-tbs2910.dts | 2 +-
arch/arm/boot/dts/imx6q.dtsi | 18 +-
arch/arm/boot/dts/imx6qdl-apalis.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-apf6dev.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-rex.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-udoo.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl.dtsi | 32 +-
arch/arm/boot/dts/imx6sx-sdb.dts | 2 +
arch/arm/boot/dts/imx6sx.dtsi | 2 +
arch/arm/boot/dts/imx6ul-14x14-evk.dts | 74 ++++
arch/arm/boot/dts/imx6ul-pico-hobbit.dts | 516 +++++++++++++++++++++++++++
arch/arm/boot/dts/imx6ul.dtsi | 12 +-
32 files changed, 1130 insertions(+), 99 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6q-marsboard.dts
create mode 100644 arch/arm/boot/dts/imx6ul-pico-hobbit.dts
More information about the linux-arm-kernel
mailing list