[PATCH 1/2] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO

[Shawn Guo]

On Fri, Apr 29, 2016 at 10:40:18PM +0200, Marcel Ziswiler wrote:
> The GPIO-based bitbanging I2C driver is required to make HDMI work on
> the Apalis iMX6 module plugged into a Ixora carrier board featuring a
> DDC channel to read a screen's EDID being hooked up to regular GPIOs.
> 
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>

Applied both, thanks.