[PATCH 01/11] ARM: dts: exynos: Fix DTC unit name warnings in cros-adc-thermistors

[Krzysztof Kozlowski]

Fix following DTC warnings in cros-adc-thermistors:
Warning (unit_address_vs_reg): Node /adc at 12D10000/ncp15wb473 at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /adc at 12D10000/ncp15wb473 at 4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /adc at 12D10000/ncp15wb473 at 5 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /adc at 12D10000/ncp15wb473 at 6 has a unit name, but no reg property

Signed-off-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
---
 arch/arm/boot/dts/cros-adc-thermistors.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/cros-adc-thermistors.dtsi b/arch/arm/boot/dts/cros-adc-thermistors.dtsi
index acd4fe1833f2..87e676917603 100644
--- a/arch/arm/boot/dts/cros-adc-thermistors.dtsi
+++ b/arch/arm/boot/dts/cros-adc-thermistors.dtsi
@@ -13,28 +13,28 @@
 */
 
 &adc {
-	ncp15wb473 at 3 {
+	ncp15wb473_3 {
 		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <47000>;
 		pulldown-ohm = <0>;
 		io-channels = <&adc 3>;
 	};
-	ncp15wb473 at 4 {
+	ncp15wb473_4 {
 		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <47000>;
 		pulldown-ohm = <0>;
 		io-channels = <&adc 4>;
 	};
-	ncp15wb473 at 5 {
+	ncp15wb473_5 {
 		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <47000>;
 		pulldown-ohm = <0>;
 		io-channels = <&adc 5>;
 	};
-	ncp15wb473 at 6 {
+	ncp15wb473_6 {
 		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <47000>;
-- 
2.5.0