[PATCH v4 0/9] ARM: dts: Add new Exynos3250-based ARTIK5 module dtsi file

[Krzysztof Kozlowski]

On 31.03.2016 11:47, Chanwoo Choi wrote:
> This patchset add the support for Device Tree source for Samsung ARTIK5 module[1]
> based on Exynos3250 SoC and development board[2]. The ARTIK5 module includes
> the follwoing devices:
> - Application Processor (Samsung Exynos3250)
> - WiFi/BT Combo chip
> - PMIC (Samsung S2MPS14)
> - eMMC (4GB)
> - DRAM LPDDR3 (512MB)
> - Connectors pin (60 Pins x 3 set)
> 
> Also, this patchset add the ARTIK5 development board[2] dts file which includes
> the ARTIK5 module[1] and have the devices such as sound codec, sd card port,
> ethernet port, uart port and so on.
> 
> [1] https://www.artik.io/hardware/artik-5
> [2] http://www.digikey.com/product-detail/en/SIP-KITNXB001/1510-1316-ND/5825102
> 
> Changes from v3:
> (https://lkml.org/lkml/2016/3/15/71)
> - Add acked-by tag from Rob Herring <robh at kernel.org> (patch8)
> - Fix typo on patch descritpion (patch8)
> - Make the separate patch for including the new clock id
>   for both MMC2 and UART2 device (patch2)
> 
> Changes from v2:
> (https://lkml.org/lkml/2016/3/14/910)
> - Add reviewed tag by Krzysztof Kozlowski for all patches
> - Include the separate patch1[3] in patchset because patch5 depend on patch1[3]
>   [3] https://lkml.org/lkml/2016/3/14/245
> - Fix the order issue in exynos3250-artik5.dtsi
> - Use lowercase for hex address in exynos3250-artik5.dtsi
> 
> Changes from v1:
> (https://lkml.org/lkml/2016/3/13/215)
> - Change the board name from 'artik5-devel' to 'artik5-eval'
> - Merge the patch6/7/8 to patch5
> - Add the new board information to samsung-boards.txt[1]
>   [1] Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> - Fix minor coding style issue and remove 'wakeup' property
> - Remove 'broken-cd' and 'desc-num' property from mshc_0 node
> - Handle the LDO11/LDO12 by using XMMC0CDn pin (GPK0-2 gpio) for MMC device
>   and fix the ldo number of 'vmmc-supply' property.
> - Add the 'vqmmc-supply' property for MSHC2
> - Drop the patch10 for PPMU node
> - Add the new patch to initialize the MMC2 gpio pin on monk board
> 
> Chanwoo Choi (6):
>   ARM: dts: Add initial pin configuration for exynos3250-rinato
>   dt-bindings: Add the clock id of UART2 and MMC2 for Exynos3250
>   clk: samsung: exynos3250: Add MMC2 clock
>   ARM: dts: Add initial gpio setting of MMC2 device for exynos3250-monk
>   ARM: dts: Add MSHC2 dt node for Exynos3250 SoC
>   ARM: dts: Add exynos3250-artik5 dtsi file for ARTIK5 module
> 
> Jaehoon Chung (1):
>   ARM: dts: Add MSHC2 dt node for SD card for exynos3250-artik5-eval board
> 
> Pankaj Dubey (2):
>   clk: samsung: exynos3250: Add UART2 clock
>   ARM: dts: Add UART2 dt node for Exynos3250 SoC

Thanks, applied all non-clock patches after pulling tag from Sylwester.

Best regards,
Krzysztof