[PATCH v5 35/46] hwmon: pwm-fan: switch to the atomic API
Boris Brezillon
boris.brezillon at free-electrons.com
Wed Mar 30 13:03:58 PDT 2016
pwm_config/enable/disable() have been deprecated and should be replaced
by pwm_apply_state().
Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
---
drivers/hwmon/pwm-fan.c | 81 ++++++++++++++++++++++++++++---------------------
1 file changed, 46 insertions(+), 35 deletions(-)
diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c
index 82c5656..da4e4ab 100644
--- a/drivers/hwmon/pwm-fan.c
+++ b/drivers/hwmon/pwm-fan.c
@@ -40,8 +40,8 @@ struct pwm_fan_ctx {
static int __set_pwm(struct pwm_fan_ctx *ctx, unsigned long pwm)
{
+ struct pwm_state pstate;
struct pwm_args pargs = { };
- unsigned long duty;
int ret = 0;
pwm_get_args(ctx->pwm, &pargs);
@@ -50,19 +50,17 @@ static int __set_pwm(struct pwm_fan_ctx *ctx, unsigned long pwm)
if (ctx->pwm_value == pwm)
goto exit_set_pwm_err;
- duty = DIV_ROUND_UP(pwm * (pargs.period - 1), MAX_PWM);
- ret = pwm_config(ctx->pwm, duty, pargs.period);
- if (ret)
- goto exit_set_pwm_err;
-
+ pwm_get_state(ctx->pwm, &pstate);
+ pstate.period = pargs.period;
+ pstate.duty_cycle = DIV_ROUND_UP(pwm * (pargs.period - 1), MAX_PWM);
if (pwm == 0)
- pwm_disable(ctx->pwm);
+ pstate.enabled = false;
+ else
+ pstate.enabled = true;
- if (ctx->pwm_value == 0) {
- ret = pwm_enable(ctx->pwm);
- if (ret)
- goto exit_set_pwm_err;
- }
+ ret = pwm_apply_state(ctx->pwm, &pstate);
+ if (ret)
+ goto exit_set_pwm_err;
ctx->pwm_value = pwm;
exit_set_pwm_err:
@@ -217,10 +215,10 @@ static int pwm_fan_of_get_cooling_data(struct device *dev,
static int pwm_fan_probe(struct platform_device *pdev)
{
struct thermal_cooling_device *cdev;
+ struct pwm_state pstate;
struct pwm_args pargs = { };
struct pwm_fan_ctx *ctx;
struct device *hwmon;
- int duty_cycle;
int ret;
ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
@@ -239,27 +237,25 @@ static int pwm_fan_probe(struct platform_device *pdev)
/* Set duty cycle to maximum allowed */
pwm_get_args(ctx->pwm, &pargs);
- duty_cycle = pargs.period - 1;
+ pwm_get_state(ctx->pwm, &pstate);
+
+ pstate.period = pargs.period;
+ pstate.duty_cycle = pargs.period - 1;
+ pstate.enabled = true;
ctx->pwm_value = MAX_PWM;
- ret = pwm_config(ctx->pwm, duty_cycle, pargs.period);
+ ret = pwm_apply_state(ctx->pwm, &pstate);
if (ret) {
dev_err(&pdev->dev, "Failed to configure PWM\n");
return ret;
}
- /* Enbale PWM output */
- ret = pwm_enable(ctx->pwm);
- if (ret) {
- dev_err(&pdev->dev, "Failed to enable PWM\n");
- return ret;
- }
-
hwmon = devm_hwmon_device_register_with_groups(&pdev->dev, "pwmfan",
ctx, pwm_fan_groups);
if (IS_ERR(hwmon)) {
dev_err(&pdev->dev, "Failed to register hwmon device\n");
- pwm_disable(ctx->pwm);
+ pstate.enabled = false;
+ pwm_apply_state(ctx->pwm, &pstate);
return PTR_ERR(hwmon);
}
@@ -275,7 +271,8 @@ static int pwm_fan_probe(struct platform_device *pdev)
if (IS_ERR(cdev)) {
dev_err(&pdev->dev,
"Failed to register pwm-fan as cooling device");
- pwm_disable(ctx->pwm);
+ pstate.enabled = false;
+ pwm_apply_state(ctx->pwm, &pstate);
return PTR_ERR(cdev);
}
ctx->cdev = cdev;
@@ -290,8 +287,14 @@ static int pwm_fan_remove(struct platform_device *pdev)
struct pwm_fan_ctx *ctx = platform_get_drvdata(pdev);
thermal_cooling_device_unregister(ctx->cdev);
- if (ctx->pwm_value)
- pwm_disable(ctx->pwm);
+ if (ctx->pwm_value) {
+ struct pwm_state pstate;
+
+ pwm_get_state(ctx->pwm, &pstate);
+ pstate.enabled = false;
+ pwm_apply_state(ctx->pwm, &pstate);
+ }
+
return 0;
}
@@ -300,27 +303,35 @@ static int pwm_fan_suspend(struct device *dev)
{
struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
- if (ctx->pwm_value)
- pwm_disable(ctx->pwm);
+ if (ctx->pwm_value) {
+ struct pwm_state pstate;
+
+ pwm_get_state(ctx->pwm, &pstate);
+ pstate.enabled = false;
+ pwm_apply_state(ctx->pwm, &pstate);
+ }
+
return 0;
}
static int pwm_fan_resume(struct device *dev)
{
struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
+ struct pwm_state pstate;
struct pwm_args pargs = { };
- unsigned long duty;
- int ret;
if (ctx->pwm_value == 0)
return 0;
pwm_get_args(ctx->pwm, &pargs);
- duty = DIV_ROUND_UP(ctx->pwm_value * (pargs.period - 1), MAX_PWM);
- ret = pwm_config(ctx->pwm, duty, pargs.period);
- if (ret)
- return ret;
- return pwm_enable(ctx->pwm);
+ pwm_get_state(ctx->pwm, &pstate);
+
+ pstate.period = pargs.period;
+ pstate.duty_cycle = DIV_ROUND_UP(ctx->pwm_value * (pargs.period - 1),
+ MAX_PWM);
+ pstate.enabled = true;
+
+ return pwm_apply_state(ctx->pwm, &pstate);
}
#endif
--
2.5.0
More information about the linux-arm-kernel
mailing list