[PATCH 6/7] ARM: socfpga: Enable Arria10 OCRAM ECC on startup

[Dinh Nguyen]

On Wed, 30 Mar 2016, tthayer at opensource.altera.com wrote:

> From: Thor Thayer <tthayer at opensource.altera.com>
> 
> Enable ECC for Arria10 On-Chip RAM on machine startup. The ECC has to be
> enabled before data is stored in memory otherwise the ECC will fail
> on reads.
> 
> Signed-off-by: Thor Thayer <tthayer at opensource.altera.com>
> ---

[snip]

> +
> +void socfpga_init_arria10_ocram_ecc(void)
> +{
> +	struct device_node *np;
> +	int ret;
> +
> +	/* Find the OCRAM EDAC device tree node */
> +	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-a10-ocram-ecc");
> +	if (!np) {
> +		pr_err("Unable to find socfpga-a10-ocram-ecc\n");
> +		return;
> +	}
> +
> +	ret = altr_init_a10_ecc_block(np, A10_SYSMGR_ECC_INTSTAT_OCRAM,
> +				      ALTR_A10_OCRAM_ECC_EN_CTL, 0);

I think this is a no-no, you shouldn't be making a call directly into the driver
from here.

BR,
Dinh