[PATCH 5/7] EDAC, altera: Addition of Arria10 OCRAM ECC
tthayer at opensource.altera.com
tthayer at opensource.altera.com
Wed Mar 30 08:27:46 PDT 2016
From: Thor Thayer <tthayer at opensource.altera.com>
Addition of the Arria10 On-Chip RAM ECC handling. Addition
of private data structure for Arria10 OCRAM ECC and the
ECC module and memory initialization functions which are
shared between memory modules such as NAND, Ethernet, etc.
Addition of a new file operations function and trigger
function for OCRAM and other peripheral memories.
Signed-off-by: Thor Thayer <tthayer at opensource.altera.com>
---
drivers/edac/altera_edac.c | 202 ++++++++++++++++++++++++++++++++++++++++++++
drivers/edac/altera_edac.h | 42 +++++++++
2 files changed, 244 insertions(+)
diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index f7ffc77..35e6f7e 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -19,6 +19,7 @@
#include <asm/cacheflush.h>
#include <linux/ctype.h>
+#include <linux/delay.h>
#include <linux/edac.h>
#include <linux/genalloc.h>
#include <linux/interrupt.h>
@@ -550,6 +551,7 @@ module_platform_driver(altr_edac_driver);
const struct edac_device_prv_data ocramecc_data;
const struct edac_device_prv_data l2ecc_data;
+const struct edac_device_prv_data a10_ocramecc_data;
const struct edac_device_prv_data a10_l2ecc_data;
static irqreturn_t altr_edac_device_handler(int irq, void *dev_id)
@@ -674,6 +676,16 @@ static const struct file_operations altr_edac_device_inject_fops = {
.llseek = generic_file_llseek,
};
+static ssize_t altr_edac_a10_device_trig(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos);
+
+static const struct file_operations altr_edac_a10_device_inject_fops = {
+ .open = simple_open,
+ .write = altr_edac_a10_device_trig,
+ .llseek = generic_file_llseek,
+};
+
static void altr_create_edacdev_dbgfs(struct edac_device_ctl_info *edac_dci,
const struct edac_device_prv_data *priv)
{
@@ -701,6 +713,8 @@ static const struct of_device_id altr_edac_device_of_match[] = {
#ifdef CONFIG_EDAC_ALTERA_OCRAM
{ .compatible = "altr,socfpga-ocram-ecc",
.data = (void *)&ocramecc_data },
+ { .compatible = "altr,socfpga-a10-ocram-ecc",
+ .data = (void *)&a10_ocramecc_data },
#endif
{},
};
@@ -889,6 +903,24 @@ const struct edac_device_prv_data ocramecc_data = {
.inject_fops = &altr_edac_device_inject_fops,
};
+static irqreturn_t altr_edac_a10_ecc_irq(struct altr_edac_device_dev *dci,
+ bool sberr);
+
+const struct edac_device_prv_data a10_ocramecc_data = {
+ .setup = altr_check_ecc_deps,
+ .ce_clear_mask = ALTR_A10_ECC_SERRPENA,
+ .ue_clear_mask = ALTR_A10_ECC_DERRPENA,
+ .irq_status_mask = A10_SYSMGR_ECC_INTSTAT_OCRAM,
+ .dbgfs_name = "altr_ocram_trigger",
+ .ecc_enable_mask = ALTR_A10_OCRAM_ECC_EN_CTL,
+ .ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
+ .ce_set_mask = ALTR_A10_ECC_TSERRA,
+ .ue_set_mask = ALTR_A10_ECC_TDERRA,
+ .set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
+ .ecc_irq_handler = altr_edac_a10_ecc_irq,
+ .inject_fops = &altr_edac_a10_device_inject_fops,
+};
+
#endif /* CONFIG_EDAC_ALTERA_OCRAM */
/********************* L2 Cache EDAC Device Functions ********************/
@@ -1007,6 +1039,173 @@ const struct edac_device_prv_data a10_l2ecc_data = {
* Based on xgene_edac.c peripheral code.
*/
+static void ecc_set_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+ u32 value = readl(ioaddr);
+
+ value |= bit_mask;
+ writel(value, ioaddr);
+}
+
+static void ecc_clear_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+ u32 value = readl(ioaddr);
+
+ value &= ~bit_mask;
+ writel(value, ioaddr);
+}
+
+static int ecc_test_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+ u32 value = readl(ioaddr);
+
+ return (value & bit_mask) ? 1 : 0;
+}
+
+/*
+ * This function uses the memory initialization block in the Arria10 ECC
+ * controller to initialize/clear the entire memory data and ECC data.
+ */
+static int altr_init_memory_port(void __iomem *ioaddr, int port)
+{
+ int limit = ALTR_A10_ECC_INIT_WATCHDOG_10US;
+ u32 init_mask = ALTR_A10_ECC_INITA;
+ u32 stat_mask = ALTR_A10_ECC_INITCOMPLETEA;
+ u32 clear_mask = ALTR_A10_ECC_ERRPENA_MASK;
+ int ret = 0;
+
+ if (port) {
+ init_mask = ALTR_A10_ECC_INITB;
+ stat_mask = ALTR_A10_ECC_INITCOMPLETEB;
+ clear_mask = ALTR_A10_ECC_ERRPENB_MASK;
+ }
+
+ ecc_set_bits(init_mask, (ioaddr + ALTR_A10_ECC_CTRL_OFST));
+ while (limit--) {
+ if (ecc_test_bits(stat_mask,
+ (ioaddr + ALTR_A10_ECC_INITSTAT_OFST)))
+ break;
+ udelay(1);
+ }
+ if (limit < 0)
+ ret = -EBUSY;
+
+ /* Clear any pending ECC interrupts */
+ writel(clear_mask, (ioaddr + ALTR_A10_ECC_INTSTAT_OFST));
+
+ return ret;
+}
+
+/*
+ * Aside from the L2 ECC, the Arria10 ECC memories have a common register
+ * layout so the following functions can be shared between all peripherals.
+ */
+int altr_init_a10_ecc_block(struct device_node *np, u32 irq_mask,
+ u32 ecc_ctrl_en_mask, bool dual_port)
+{
+ int ret = 0;
+ void __iomem *ecc_block_base;
+ struct regmap *ecc_mgr_map;
+ char *ecc_name = (char *)np->name;
+ struct device_node *np_parent = of_get_parent(np);
+
+ ecc_mgr_map = syscon_regmap_lookup_by_phandle(np_parent,
+ "altr,sysmgr-syscon");
+ of_node_put(np_parent);
+ if (IS_ERR(ecc_mgr_map)) {
+ edac_printk(KERN_ERR, EDAC_DEVICE,
+ "Unable to get syscon altr,sysmgr-syscon\n");
+ return -ENODEV;
+ }
+
+ /* Map the ECC Block */
+ ecc_block_base = of_iomap(np, 0);
+ if (!ecc_block_base) {
+ edac_printk(KERN_ERR, EDAC_DEVICE,
+ "Unable to map %s ECC block\n", ecc_name);
+ return -ENODEV;
+ }
+
+ /* Disable ECC */
+ regmap_write(ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_SET_OFST, irq_mask);
+ ecc_clear_bits(ALTR_A10_ECC_SERRINTEN,
+ (ecc_block_base + ALTR_A10_ECC_ERRINTEN_OFST));
+ ecc_clear_bits(ecc_ctrl_en_mask,
+ (ecc_block_base + ALTR_A10_ECC_CTRL_OFST));
+ /* Use HW initialization block to initialize memory for ECC */
+ ret = altr_init_memory_port(ecc_block_base, 0);
+ if (ret) {
+ edac_printk(KERN_ERR, EDAC_DEVICE,
+ "ECC: cannot init %s PORTA memory\n", ecc_name);
+ goto out;
+ }
+
+ if (dual_port) {
+ ret = altr_init_memory_port(ecc_block_base, 1);
+ if (ret) {
+ edac_printk(KERN_ERR, EDAC_DEVICE,
+ "ECC: cannot init %s PORTA memory\n",
+ ecc_name);
+ goto out;
+ }
+ }
+
+ /* Enable ECC */
+ ecc_set_bits(ecc_ctrl_en_mask, (ecc_block_base +
+ ALTR_A10_ECC_CTRL_OFST));
+ ecc_set_bits(ALTR_A10_ECC_SERRINTEN,
+ (ecc_block_base + ALTR_A10_ECC_ERRINTEN_OFST));
+ regmap_write(ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_CLR_OFST, irq_mask);
+ /* Ensure all writes complete */
+ wmb();
+out:
+ return ret;
+}
+
+static ssize_t altr_edac_a10_device_trig(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct edac_device_ctl_info *edac_dci = file->private_data;
+ struct altr_edac_device_dev *drvdata = edac_dci->pvt_info;
+ const struct edac_device_prv_data *priv = drvdata->data;
+ void __iomem *set_addr = (drvdata->base + priv->set_err_ofst);
+ unsigned long flags;
+ u8 trig_type;
+
+ if (!user_buf || get_user(trig_type, user_buf))
+ return -EFAULT;
+
+ local_irq_save(flags);
+ if (trig_type == ALTR_UE_TRIGGER_CHAR)
+ writel(priv->ue_set_mask, set_addr);
+ else
+ writel(priv->ce_set_mask, set_addr);
+ /* Ensure the interrupt test bits are set */
+ wmb();
+ local_irq_restore(flags);
+
+ return count;
+}
+
+static irqreturn_t altr_edac_a10_ecc_irq(struct altr_edac_device_dev *dci,
+ bool sberr)
+{
+ void __iomem *base = dci->base;
+
+ if (sberr) {
+ writel(ALTR_A10_ECC_SERRPENA,
+ base + ALTR_A10_ECC_INTSTAT_OFST);
+ edac_device_handle_ce(dci->edac_dev, 0, 0, dci->edac_dev_name);
+ } else {
+ writel(ALTR_A10_ECC_DERRPENA,
+ base + ALTR_A10_ECC_INTSTAT_OFST);
+ edac_device_handle_ue(dci->edac_dev, 0, 0, dci->edac_dev_name);
+ panic("\nEDAC:ECC_DEVICE[Uncorrectable errors]\n");
+ }
+ return IRQ_HANDLED;
+}
+
static irqreturn_t altr_edac_a10_irq_handler(int irq, void *dev_id)
{
irqreturn_t rc = IRQ_NONE;
@@ -1171,6 +1370,9 @@ static int altr_edac_a10_probe(struct platform_device *pdev)
continue;
if (of_device_is_compatible(child, "altr,socfpga-a10-l2-ecc"))
altr_edac_a10_device_add(edac, child);
+ else if (of_device_is_compatible(child,
+ "altr,socfpga-a10-ocram-ecc"))
+ altr_edac_a10_device_add(edac, child);
}
return 0;
diff --git a/drivers/edac/altera_edac.h b/drivers/edac/altera_edac.h
index cb6b2b9..bd46810 100644
--- a/drivers/edac/altera_edac.h
+++ b/drivers/edac/altera_edac.h
@@ -19,6 +19,7 @@
#define _ALTERA_EDAC_H
#include <linux/edac.h>
+#include <linux/irq.h>
#include <linux/types.h>
/* SDRAM Controller CtrlCfg Register */
@@ -220,9 +221,41 @@ struct altr_sdram_mc_data {
#define ALTR_L2_ECC_INJD BIT(2)
/* Arria10 General ECC Block Module Defines */
+#define ALTR_A10_ECC_CTRL_OFST 0x08
+#define ALTR_A10_ECC_EN BIT(0)
+#define ALTR_A10_ECC_INITA BIT(16)
+#define ALTR_A10_ECC_INITB BIT(24)
+
+#define ALTR_A10_ECC_INITSTAT_OFST 0x0C
+#define ALTR_A10_ECC_INITCOMPLETEA BIT(0)
+#define ALTR_A10_ECC_INITCOMPLETEB BIT(8)
+
+#define ALTR_A10_ECC_ERRINTEN_OFST 0x10
+#define ALTR_A10_ECC_SERRINTEN BIT(0)
+
+#define ALTR_A10_ECC_INTSTAT_OFST 0x20
+#define ALTR_A10_ECC_SERRPENA BIT(0)
+#define ALTR_A10_ECC_DERRPENA BIT(8)
+#define ALTR_A10_ECC_ERRPENA_MASK (ALTR_A10_ECC_SERRPENA | \
+ ALTR_A10_ECC_DERRPENA)
+#define ALTR_A10_ECC_SERRPENB BIT(16)
+#define ALTR_A10_ECC_DERRPENB BIT(24)
+#define ALTR_A10_ECC_ERRPENB_MASK (ALTR_A10_ECC_SERRPENB | \
+ ALTR_A10_ECC_DERRPENB)
+
+#define ALTR_A10_ECC_INTTEST_OFST 0x24
+#define ALTR_A10_ECC_TSERRA BIT(0)
+#define ALTR_A10_ECC_TDERRA BIT(8)
+
+/* ECC Manager Defines */
+#define A10_SYSMGR_ECC_INTMASK_SET_OFST 0x94
+#define A10_SYSMGR_ECC_INTMASK_CLR_OFST 0x98
+#define A10_SYSMGR_ECC_INTMASK_OCRAM BIT(1)
+
#define A10_SYSMGR_ECC_INTSTAT_SERR_OFST 0x9C
#define A10_SYSMGR_ECC_INTSTAT_DERR_OFST 0xA0
#define A10_SYSMGR_ECC_INTSTAT_L2 BIT(0)
+#define A10_SYSMGR_ECC_INTSTAT_OCRAM BIT(1)
#define A10_SYSGMR_MPU_CLEAR_L2_ECC_OFST 0xA8
#define A10_SYSGMR_MPU_CLEAR_L2_ECC_SB BIT(15)
@@ -245,6 +278,9 @@ struct altr_sdram_mc_data {
#define ALTR_A10_L2_ECC_CE_INJ_MASK 0x00000101
#define ALTR_A10_L2_ECC_UE_INJ_MASK 0x00010101
+/* Arria 10 OCRAM ECC Management Group Defines */
+#define ALTR_A10_OCRAM_ECC_EN_CTL (BIT(1) | BIT(0))
+
struct altr_edac_device_dev;
struct edac_device_prv_data {
@@ -288,4 +324,10 @@ struct altr_arria10_edac {
struct list_head a10_ecc_devices;
};
+/* A10 ECC Controller memory initialization timeout */
+#define ALTR_A10_ECC_INIT_WATCHDOG_10US 10000
+
+int altr_init_a10_ecc_block(struct device_node *np, u32 irq_mask,
+ u32 ecc_ctrl_en_mask, bool dual_port);
+
#endif /* #ifndef _ALTERA_EDAC_H */
--
1.7.9.5
More information about the linux-arm-kernel
mailing list