[PATCH 0/4] Add support for Engicam IMX6UL module

[Michael Trimarchi]

Hi


On Wed, Mar 30, 2016 at 1:47 PM, Shawn Guo <shawnguo at kernel.org> wrote:
> On Sat, Feb 20, 2016 at 11:20:48AM +0100, Michael Trimarchi wrote:
>> Thi patch series add the support for Engicam IMXUL product
>>
>> https://community.freescale.com/docs/DOC-328428
>>
>> Based on Freescale™ i.MX 6UltraLite processor, a high performance,
>> ultra-efficient processor family featuring an advanced implementation
>> of a single ARM™ Cortex™-A7 core, which operates at speeds up to 528 MHz.
>>
>> The new ENGICAM GEA M6UL module is suitable for cost effective HMI
>> applications requiring high performance CPU.
>>
>> Michael Trimarchi (4):
>>   ARM: dts: imx6ul: Add flexcan1 and flexcan2 support
>>   ARM: dts: imx6ul: Add LCDIF support
>>   ARM: dts: imx6ul: Add GPMI nand controller support
>>   ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support
>
> There are quite some changes around imx6ul.dtsi getting into 4.6-rc1.
> Can you please rebase onto 4.6-rc1 and resend?
>

I will prepare tonight again, let test them tomorrow and send back
tomorrow evening

Michael


> Shawn
>
>>
>>  arch/arm/boot/dts/Makefile             |   3 +-
>>  arch/arm/boot/dts/imx6ul-geam-kit.dts  | 102 +++++++++
>>  arch/arm/boot/dts/imx6ul-geam.dtsi     | 371 +++++++++++++++++++++++++++++++++
>>  arch/arm/boot/dts/imx6ul.dtsi          |  68 ++++++
>>  drivers/mtd/nand/gpmi-nand/gpmi-nand.c |  10 +
>>  drivers/mtd/nand/gpmi-nand/gpmi-nand.h |   6 +-
>>  6 files changed, 557 insertions(+), 3 deletions(-)
>>  create mode 100644 arch/arm/boot/dts/imx6ul-geam-kit.dts
>>  create mode 100644 arch/arm/boot/dts/imx6ul-geam.dtsi
>>
>> --
>> 2.7.0
>>
>>



-- 
| Michael Nazzareno Trimarchi                     Amarula Solutions BV |
| COO  -  Founder                                      Cruquiuskade 47 |
| +31(0)851119172                                 Amsterdam 1018 AM NL |
|                  [`as] http://www.amarulasolutions.com               |