[PATCH] i.MX6 PCIe: Fix imx6_pcie_deassert_core_reset() polarity

[Fabio Estevam]

On Wed, Mar 30, 2016 at 9:06 AM, Petr Štetiar <ynezz at true.cz> wrote:

> I'm really puzzled by this :-) With your patch applied I get following on
> Toradex Apalis modules:
>
>  DTS:         reset-gpio = <&gpio1 28 GPIO_ACTIVE_LOW>;
>  dmesg:       imx6q-pcie 1ffc000.pcie: phy link never came up
>  gpio:        gpio-28  (                    |reset               ) out hi
>  pin voltage: 0V
>
>  DTS:         reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
>  dmesg:       ath9k 0000:01:00.0: enabling device (0140 -> 0142)
>  gpio:        gpio-28  (                    |reset               ) out lo
>  pin voltage: 3V3
>
> So Toradex Apalis is actually active-high? Thanks.

Yes, exactly. That's why you need to introduce a new property to
handle the active-high case, so that old dtb's are not broken.