[PATCH 3/4] arm64: dts: Move NS2 clock DT nodes to separate DT file
Anup Patel
anup.patel at broadcom.com
Tue Mar 29 00:27:33 PDT 2016
For more readabilty and consistency with other Broadcom SoCs, we move
all NS2 clock DT nodes from main SoC DT file to a separate DT file.
We also update the license header in ns2.dtsi as-per new Broadcom
convention.
Signed-off-by: Anup Patel <anup.patel at broadcom.com>
Reviewed-by: Ray Jui <rjui at broadcom.com>
Reviewed-by: Scott Branden <sbranden at broadcom.com>
---
arch/arm64/boot/dts/broadcom/ns2-clock.dtsi | 105 ++++++++++++++++++++++++++++
arch/arm64/boot/dts/broadcom/ns2.dtsi | 81 +--------------------
2 files changed, 108 insertions(+), 78 deletions(-)
create mode 100644 arch/arm64/boot/dts/broadcom/ns2-clock.dtsi
diff --git a/arch/arm64/boot/dts/broadcom/ns2-clock.dtsi b/arch/arm64/boot/dts/broadcom/ns2-clock.dtsi
new file mode 100644
index 0000000..99009fd
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/ns2-clock.dtsi
@@ -0,0 +1,105 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/clock/bcm-ns2.h>
+
+ osc: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ lcpll_ddr: lcpll_ddr at 6501d058 {
+ #clock-cells = <1>;
+ compatible = "brcm,ns2-lcpll-ddr";
+ reg = <0x6501d058 0x20>,
+ <0x6501c020 0x4>,
+ <0x6501d04c 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "lcpll_ddr", "pcie_sata_usb",
+ "ddr", "ddr_ch2_unused",
+ "ddr_ch3_unused", "ddr_ch4_unused",
+ "ddr_ch5_unused";
+ };
+
+ lcpll_ports: lcpll_ports at 6501d078 {
+ #clock-cells = <1>;
+ compatible = "brcm,ns2-lcpll-ports";
+ reg = <0x6501d078 0x20>,
+ <0x6501c020 0x4>,
+ <0x6501d054 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "lcpll_ports", "wan", "rgmii",
+ "ports_ch2_unused",
+ "ports_ch3_unused",
+ "ports_ch4_unused",
+ "ports_ch5_unused";
+ };
+
+ genpll_scr: genpll_scr at 6501d098 {
+ #clock-cells = <1>;
+ compatible = "brcm,ns2-genpll-scr";
+ reg = <0x6501d098 0x32>,
+ <0x6501c020 0x4>,
+ <0x6501d044 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll_scr", "scr", "fs",
+ "audio_ref", "scr_ch3_unused",
+ "scr_ch4_unused", "scr_ch5_unused";
+ };
+
+ iprocmed: iprocmed {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ iprocslow: iprocslow {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+
+ genpll_sw: genpll_sw at 6501d0c4 {
+ #clock-cells = <1>;
+ compatible = "brcm,ns2-genpll-sw";
+ reg = <0x6501d0c4 0x32>,
+ <0x6501c020 0x4>,
+ <0x6501d044 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll_sw", "rpe", "250", "nic",
+ "chimp", "port", "sdio";
+ };
diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi
index 940ed52..0a92a68 100644
--- a/arch/arm64/boot/dts/broadcom/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi
@@ -1,7 +1,7 @@
/*
* BSD LICENSE
*
- * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
+ * Copyright (c) 2015 Broadcom. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@@ -110,33 +110,6 @@
<&A57_3>;
};
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
-
- osc: oscillator {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <25000000>;
- };
-
- iprocmed: iprocmed {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
- clock-div = <2>;
- clock-mult = <1>;
- };
-
- iprocslow: iprocslow {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
pcie0: pcie at 20020000 {
compatible = "brcm,iproc-pcie";
reg = <0 0x20020000 0 0x1000>;
@@ -217,6 +190,8 @@
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
+ #include "ns2-clock.dtsi"
+
dma0: dma at 61360000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x61360000 0x1000>;
@@ -277,56 +252,6 @@
mmu-masters;
};
- lcpll_ddr: lcpll_ddr at 6501d058 {
- #clock-cells = <1>;
- compatible = "brcm,ns2-lcpll-ddr";
- reg = <0x6501d058 0x20>,
- <0x6501c020 0x4>,
- <0x6501d04c 0x4>;
- clocks = <&osc>;
- clock-output-names = "lcpll_ddr", "pcie_sata_usb",
- "ddr", "ddr_ch2_unused",
- "ddr_ch3_unused", "ddr_ch4_unused",
- "ddr_ch5_unused";
- };
-
- lcpll_ports: lcpll_ports at 6501d078 {
- #clock-cells = <1>;
- compatible = "brcm,ns2-lcpll-ports";
- reg = <0x6501d078 0x20>,
- <0x6501c020 0x4>,
- <0x6501d054 0x4>;
- clocks = <&osc>;
- clock-output-names = "lcpll_ports", "wan", "rgmii",
- "ports_ch2_unused",
- "ports_ch3_unused",
- "ports_ch4_unused",
- "ports_ch5_unused";
- };
-
- genpll_scr: genpll_scr at 6501d098 {
- #clock-cells = <1>;
- compatible = "brcm,ns2-genpll-scr";
- reg = <0x6501d098 0x32>,
- <0x6501c020 0x4>,
- <0x6501d044 0x4>;
- clocks = <&osc>;
- clock-output-names = "genpll_scr", "scr", "fs",
- "audio_ref", "scr_ch3_unused",
- "scr_ch4_unused", "scr_ch5_unused";
- };
-
- genpll_sw: genpll_sw at 6501d0c4 {
- #clock-cells = <1>;
- compatible = "brcm,ns2-genpll-sw";
- reg = <0x6501d0c4 0x32>,
- <0x6501c020 0x4>,
- <0x6501d044 0x4>;
- clocks = <&osc>;
- clock-output-names = "genpll_sw", "rpe", "250", "nic",
- "chimp", "port", "sdio";
- };
-
crmu: crmu at 65024000 {
compatible = "syscon";
reg = <0x65024000 0x100>;
--
1.9.1
More information about the linux-arm-kernel
mailing list