[PATCH v2 8/8] ARM: dts: vf610-colibri: enable display controller
Stefan Agner
stefan at agner.ch
Mon Mar 28 19:00:02 PDT 2016
Enable dcu node which is used by the DCU DRM driver. Assign the 5.7"
EDT panel with VGA resolution which Toradex sells often with the
evaluation board.
Signed-off-by: Stefan Agner <stefan at agner.ch>
---
arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 16 +++++++++++++++
arch/arm/boot/dts/vf-colibri.dtsi | 33 +++++++++++++++++++++++++++++++
2 files changed, 49 insertions(+)
diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
index ed65e0f..f5d4c78 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -18,6 +18,11 @@
clock-frequency = <16000000>;
};
+ panel: panel {
+ compatible = "edt,et057090dhu";
+ backlight = <&bl>;
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
@@ -53,6 +58,13 @@
status = "okay";
};
+&dcu0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dcu0_1>;
+ fsl,panel = <&panel>;
+ status = "okay";
+};
+
&dspi1 {
status = "okay";
@@ -100,6 +112,10 @@
status = "okay";
};
+&tcon0 {
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi
index 6e556be..5f1847b 100644
--- a/arch/arm/boot/dts/vf-colibri.dtsi
+++ b/arch/arm/boot/dts/vf-colibri.dtsi
@@ -159,6 +159,39 @@
>;
};
+ pinctrl_dcu0_1: dcu0grp_1 {
+ fsl,pins = <
+ VF610_PAD_PTE0__DCU0_HSYNC 0x1902
+ VF610_PAD_PTE1__DCU0_VSYNC 0x1902
+ VF610_PAD_PTE2__DCU0_PCLK 0x1902
+ VF610_PAD_PTE4__DCU0_DE 0x1902
+ VF610_PAD_PTE5__DCU0_R0 0x1902
+ VF610_PAD_PTE6__DCU0_R1 0x1902
+ VF610_PAD_PTE7__DCU0_R2 0x1902
+ VF610_PAD_PTE8__DCU0_R3 0x1902
+ VF610_PAD_PTE9__DCU0_R4 0x1902
+ VF610_PAD_PTE10__DCU0_R5 0x1902
+ VF610_PAD_PTE11__DCU0_R6 0x1902
+ VF610_PAD_PTE12__DCU0_R7 0x1902
+ VF610_PAD_PTE13__DCU0_G0 0x1902
+ VF610_PAD_PTE14__DCU0_G1 0x1902
+ VF610_PAD_PTE15__DCU0_G2 0x1902
+ VF610_PAD_PTE16__DCU0_G3 0x1902
+ VF610_PAD_PTE17__DCU0_G4 0x1902
+ VF610_PAD_PTE18__DCU0_G5 0x1902
+ VF610_PAD_PTE19__DCU0_G6 0x1902
+ VF610_PAD_PTE20__DCU0_G7 0x1902
+ VF610_PAD_PTE21__DCU0_B0 0x1902
+ VF610_PAD_PTE22__DCU0_B1 0x1902
+ VF610_PAD_PTE23__DCU0_B2 0x1902
+ VF610_PAD_PTE24__DCU0_B3 0x1902
+ VF610_PAD_PTE25__DCU0_B4 0x1902
+ VF610_PAD_PTE26__DCU0_B5 0x1902
+ VF610_PAD_PTE27__DCU0_B6 0x1902
+ VF610_PAD_PTE28__DCU0_B7 0x1902
+ >;
+ };
+
pinctrl_dspi1: dspi1grp {
fsl,pins = <
VF610_PAD_PTD5__DSPI1_CS0 0x33e2
--
2.7.4
More information about the linux-arm-kernel
mailing list