[PATCH v2 0/8] add TCON and Vybrid support
Stefan Agner
stefan at agner.ch
Mon Mar 28 18:59:54 PDT 2016
This patchset adds the missing pieces to make the Freescale
DCU DRM driver work on Freescale Vybrid.
Foremost, it adds support for the timing controller (TCON)
module. The module is between the Display Controller and the
actual output pins. It allows to alter the timings for RAW
TFT displays, but can also operate in a bypass mode. This
change has only support for the bypass mode.
Earlier variants of the DCU DRM driver configured the TCON
module in bypass mode, however this has been removed and
postponed. The last variant with the TCON code was v9:
https://lkml.org/lkml/2015/7/13/242
The patchset also fixes the DCU related clocks in the Vybrid
clock tree and makes use of the common clock framework for
the pixelclock divider.
Testing on LS1021a welcomeing!
Changes since v1:
- Properly disable clocks on errors
- Create clear seperation of pixel clock and bus clock
- Simplified TCON driver by removing suspend/resume
capabilities (encoder disable/enable makes sure that
TCON bypass gets disabled/reenabled on suspend)
- Use common clock framework to create a divider clock
which represents the DCU internal pixel clock divider
Stefan Agner (8):
ARM: imx: clk-vf610: fix DCU clock tree
ARM: imx: clk-vf610: add TCON ipg clock
drm/fsl-dcu: disable clock on initialization failure and remove
drm/fsl-dcu: add extra clock for pixel clock
drm/fsl-dcu: use common clock framework for pixel clock divider
drm/fsl-dcu: add TCON driver
ARM: dts: vf610: add display nodes
ARM: dts: vf610-colibri: enable display controller
.../devicetree/bindings/display/fsl,dcu.txt | 6 ++
.../devicetree/bindings/display/fsl,tcon.txt | 18 ++++
arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 16 +++
arch/arm/boot/dts/vf-colibri.dtsi | 33 +++++++
arch/arm/boot/dts/vfxxx.dtsi | 19 ++++
drivers/clk/imx/clk-vf610.c | 7 +-
drivers/gpu/drm/fsl-dcu/Makefile | 3 +-
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c | 7 +-
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 73 ++++++++++----
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h | 2 +
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c | 11 +++
drivers/gpu/drm/fsl-dcu/fsl_tcon.c | 108 +++++++++++++++++++++
drivers/gpu/drm/fsl-dcu/fsl_tcon.h | 33 +++++++
include/dt-bindings/clock/vf610-clock.h | 4 +-
14 files changed, 311 insertions(+), 29 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/fsl,tcon.txt
create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_tcon.c
create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_tcon.h
--
2.7.4
More information about the linux-arm-kernel
mailing list