[PATCH] ARM: dts: imx6qdl-sabresd: Pass the hannstar panel compatible string

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at nxp.com>

It is preferred to use the panel compatible string rather than passing the
LCD timings in the device tree.

So pass the "hannstar,hsd100pxn1" compatible string to describe
the LVDS panel on this board.

Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
---
 arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 30 +++++++++++++++++-------------
 1 file changed, 17 insertions(+), 13 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 0b5c4de..b78cd79 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -115,7 +115,7 @@
 		mux-ext-port = <3>;
 	};
 
-	backlight {
+	backlight_lvds: backlight_lvds {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -133,6 +133,17 @@
 		        default-state = "on";
 		};
 	};
+
+	panel {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
 };
 
 &audmux {
@@ -509,18 +520,11 @@
 		fsl,data-width = <18>;
 		status = "okay";
 
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
+		port at 4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
 			};
 		};
 	};
-- 
1.9.1