[PATCH 1/2] ARM: multi_v5_defconfig: Enable support for MX21/MX27

[Jan Luebbe]

Although the SoC support was already enabled, the drivers and machines
were missing.

Signed-off-by: Jan Luebbe <jlu at pengutronix.de>
---
 arch/arm/configs/multi_v5_defconfig | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
index e11d99d..bb8d609 100644
--- a/arch/arm/configs/multi_v5_defconfig
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -13,6 +13,11 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_KIRKWOOD=y
 CONFIG_ARCH_MXC=y
+CONFIG_MACH_MX21ADS=y
+CONFIG_MACH_MX27ADS=y
+CONFIG_MACH_MX27_3DS=y
+CONFIG_MACH_IMX27_VISSTRIM_M10=y
+CONFIG_MACH_PCA100=y
 CONFIG_MACH_IMX27_DT=y
 CONFIG_SOC_IMX25=y
 CONFIG_ARCH_ORION5X=y
@@ -67,6 +72,7 @@ CONFIG_NET_PKTGEN=m
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_IMX_WEIM=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -110,13 +116,17 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_IMX=y
 CONFIG_I2C_MV64XXX=y
 CONFIG_I2C_NOMADIK=y
 CONFIG_SPI=y
+CONFIG_SPI_IMX=y
 CONFIG_SPI_ORION=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_POWER_RESET=y
@@ -131,10 +141,12 @@ CONFIG_THERMAL=y
 CONFIG_KIRKWOOD_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_ORION_WATCHDOG=y
+CONFIG_IMX2_WDT=y
 # CONFIG_ABX500_CORE is not set
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_FB=y
+CONFIG_FB_IMX=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SOC=y
@@ -158,7 +170,6 @@ CONFIG_HID_ZEROPLUS=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_PRINTER=m
 CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DATAFAB=y
@@ -166,6 +177,8 @@ CONFIG_USB_STORAGE_FREECOM=y
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
 CONFIG_MMC=y
 CONFIG_SDIO_UART=y
 CONFIG_MMC_MVSDIO=y
-- 
2.1.4