[PATCH] usb: host: xhci-plat: Make enum xhci_plat_type start at a non zero value
Felipe Balbi
balbi at kernel.org
Sat Mar 26 03:10:39 PDT 2016
Hi,
Peter Griffin <peter.griffin at linaro.org> writes:
> Hi Felipe,
>
> On Fri, 25 Mar 2016, Felipe Balbi wrote:
>
>>
>> Hi,
>>
>> Gregory CLEMENT <gregory.clement at free-electrons.com> writes:
>> >> Peter Griffin <peter.griffin at linaro.org> writes:
>> >>> Otherwise generic-xhci and xhci-platform which have no data get wrongly
>> >>> detected as XHCI_PLAT_TYPE_MARVELL_ARMADA by xhci_plat_type_is().
>> >>>
>> >>> This fixes a regression in v4.5 for STiH407 family SoC's which use the
>> >>> synopsis dwc3 IP, whereby the disable_clk error path gets taken due to
>> >>> wrongly being detected as XHCI_PLAT_TYPE_MARVELL_ARMADA and the hcd never
>> >>> gets added.
>> >>>
>> >>> I suspect this will also fix other dwc3 DT platforms such as Exynos,
>> >>> although I've only tested on STih410 SoC.
>> >>>
>> >>> Fixes: 4efb2f694114 ("usb: host: xhci-plat: add struct xhci_plat_priv")
>> >>> Cc: stable at vger.kernel.org
>> >>> Cc: gregory.clement at free-electrons.com
>> >>> Cc: yoshihiro.shimoda.uh at renesas.com
>> >>> Signed-off-by: Peter Griffin <peter.griffin at linaro.org>
>> >>> ---
>> >>> drivers/usb/host/xhci-plat.h | 2 +-
>> >>> 1 file changed, 1 insertion(+), 1 deletion(-)
>> >>>
>> >>> diff --git a/drivers/usb/host/xhci-plat.h b/drivers/usb/host/xhci-plat.h
>> >>> index 5a2e2e3..529c3c4 100644
>> >>> --- a/drivers/usb/host/xhci-plat.h
>> >>> +++ b/drivers/usb/host/xhci-plat.h
>> >>> @@ -14,7 +14,7 @@
>> >>> #include "xhci.h" /* for hcd_to_xhci() */
>> >>>
>> >>> enum xhci_plat_type {
>> >>> - XHCI_PLAT_TYPE_MARVELL_ARMADA,
>> >>> + XHCI_PLAT_TYPE_MARVELL_ARMADA = 1,
>> >>> XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2,
>> >>> XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3,
>> >>
>> >> aren't these platforms using device tree ? Why aren't these just
>> >> different compatible strings ?
>> >
>> > According to 4efb2f69411456d35051e9047c15157c9a5ba217 "usb: host:
>> > xhci-plat: add struct xhci_plat_priv" :
>> >
>> > This patch adds struct xhci_plat_priv to simplify the code to match
>> > platform specific variables. For now, this patch adds a member "type" in
>> > the structure
>>
>> that's fine but the answer doesn't exactly match my question ;-)
>>
>> My point is that this enum shouldn't be necessary at all. We have
>> compatible flags to make these checks instead. How about below ?
>> (untested, uncompiled, yada yada yada). Note that we DON'T need this
>> xhci_plat_type trickery, just need to be a little bit smarter about how
>> we use driver_data:
>
> Your solution certainly looks more elegant.
cool thanks. Now that I think about this more carefully, we might wanna
take $subject anyway for the -rc and get my version applied for v4.7
merge window. What do you think ?
>> diff --git a/drivers/usb/host/xhci-mvebu.c b/drivers/usb/host/xhci-mvebu.c
>> index 1eefc988192d..1ea6c18b74f3 100644
>> --- a/drivers/usb/host/xhci-mvebu.c
>> +++ b/drivers/usb/host/xhci-mvebu.c
>> @@ -41,8 +41,9 @@ static void xhci_mvebu_mbus_config(void __iomem *base,
>> }
>> }
>>
>> -int xhci_mvebu_mbus_init_quirk(struct platform_device *pdev)
>> +int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd)
>> {
>> + struct platform_device *pdev = to_platform_device(hcd->self.controller);
>> struct resource *res;
>> void __iomem *base;
>> const struct mbus_dram_target_info *dram;
>> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
>> index 5c15e9bc5f7a..adb77c60a9ae 100644
>> --- a/drivers/usb/host/xhci-plat.c
>> +++ b/drivers/usb/host/xhci-plat.c
>> @@ -47,43 +47,56 @@ static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
>> xhci->quirks |= XHCI_PLAT;
>> }
>>
>> +static void xhci_priv_plat_start(struct usb_hcd *hcd)
>> +{
>> + struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
>> +
>> + if (priv->plat_start)
>> + priv->plat_start(hcd);
>> +}
>> +
>> +static int xhci_priv_init_quirk(struct usb_hcd *hcd)
>> +{
>> + struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
>> +
>> + if (!priv->init_quirk)
>> + return 0;
>> +
>> + return priv->init_quirk(hcd);
>> +}
>> +
>> /* called during probe() after chip reset completes */
>> static int xhci_plat_setup(struct usb_hcd *hcd)
>> {
>> int ret;
>>
>> - if (xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2) ||
>> - xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3)) {
>> - ret = xhci_rcar_init_quirk(hcd);
>> - if (ret)
>> - return ret;
>> - }
>> + ret = xhci_priv_init_quirk(hcd);
>> + if (ret)
>> + return ret;
>>
>> return xhci_gen_setup(hcd, xhci_plat_quirks);
>> }
>>
>> static int xhci_plat_start(struct usb_hcd *hcd)
>> {
>> - if (xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2) ||
>> - xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3))
>> - xhci_rcar_start(hcd);
>> -
>> + xhci_priv_plat_start(hcd);
>> return xhci_run(hcd);
>> }
>>
>> #ifdef CONFIG_OF
>> static const struct xhci_plat_priv xhci_plat_marvell_armada = {
>> - .type = XHCI_PLAT_TYPE_MARVELL_ARMADA,
>> + .init_quirk = xhci_mvebu_mbus_init_quirk,
>> };
>>
>> static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = {
>> - .type = XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2,
>> .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V1,
>> + .init_quirk = xhci_rcar_init_quirk,
>> };
>>
>> static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = {
>> - .type = XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3,
>> .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V2,
>> + .init_quirk = xhci_rcar_init_quirk,
>> + .plat_start = xhci_rcar_start,
>> };
>>
>> static const struct of_device_id usb_xhci_of_match[] = {
>> diff --git a/drivers/usb/host/xhci-plat.h b/drivers/usb/host/xhci-plat.h
>> index 5a2e2e3936c4..c4d565980832 100644
>> --- a/drivers/usb/host/xhci-plat.h
>> +++ b/drivers/usb/host/xhci-plat.h
>> @@ -13,27 +13,13 @@
>>
>> #include "xhci.h" /* for hcd_to_xhci() */
>>
>> -enum xhci_plat_type {
>> - XHCI_PLAT_TYPE_MARVELL_ARMADA,
>> - XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2,
>> - XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3,
>> -};
>> -
>> struct xhci_plat_priv {
>> enum xhci_plat_type type;
>> const char *firmware_name;
>> + void (*plat_start)(struct usb_hcd *);
>> + int (*init_quirk)(struct usb_hcd *);
>> };
>>
>> #define hcd_to_xhci_priv(h) ((struct xhci_plat_priv *)hcd_to_xhci(h)->priv)
>>
>> -static inline bool xhci_plat_type_is(struct usb_hcd *hcd,
>> - enum xhci_plat_type type)
>> -{
>> - struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
>> -
>> - if (priv && priv->type == type)
>> - return true;
>> - else
>> - return false;
>> -}
>> #endif /* _XHCI_PLAT_H */
>>
>> ps: there might be bugs there, but it's a holiday and I really shouldn't
>> be spending time on this right now ;-)
>
> I'm also off on holiday now until Sunday 10th April... yay :-)
heh, cool :-)
>> Anyway, have fun testing. Let me know if it doesn't work.
>
> I only have access to STi platforms which were broken by this change.
> Not any of the platforms which rely on the functionality which
> was introduced (although I can't see any reason why your patch wouldn't work).
>
> Maybe Yoshihiro (on CC) could test this on the Renesas platforms and
> confirm?
sure, that would be great; then we avoid further regressions ;-)
--
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 818 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160326/5f3fc385/attachment-0001.sig>
More information about the linux-arm-kernel
mailing list