[RFC PATCH 15/45] KVM: arm/arm64: vgic-new: Add ENABLE registers handlers
Andre Przywara
andre.przywara at arm.com
Thu Mar 24 19:04:38 PDT 2016
Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
virt/kvm/arm/vgic/vgic_mmio.c | 81 +++++++++++++++++++++++++++++++++++++++++--
1 file changed, 79 insertions(+), 2 deletions(-)
diff --git a/virt/kvm/arm/vgic/vgic_mmio.c b/virt/kvm/arm/vgic/vgic_mmio.c
index e62366e..0688a69 100644
--- a/virt/kvm/arm/vgic/vgic_mmio.c
+++ b/virt/kvm/arm/vgic/vgic_mmio.c
@@ -129,15 +129,92 @@ static int vgic_mmio_write_v2_misc(struct kvm_vcpu *vcpu,
return 0;
}
+/*
+ * Read accesses to both GICD_ICENABLER and GICD_ISENABLER return the value
+ * of the enabled bit, so there is only one function for both here.
+ */
+static int vgic_mmio_read_enable(struct kvm_vcpu *vcpu,
+ struct kvm_io_device *this,
+ gpa_t addr, int len, void *val)
+{
+ struct vgic_io_device *iodev = container_of(this,
+ struct vgic_io_device, dev);
+ u32 intid = (addr - iodev->base_addr) * 8;
+ u32 value = 0;
+ int i;
+
+ if (iodev->redist_vcpu)
+ vcpu = iodev->redist_vcpu;
+
+ /* Loop over all IRQs affected by this read */
+ for (i = 0; i < len * 8; i++) {
+ struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+ if (irq->enabled)
+ value |= (1U << i);
+ }
+
+ write_mask32(value, addr & 3, len, val);
+ return 0;
+}
+
+static int vgic_mmio_write_senable(struct kvm_vcpu *vcpu,
+ struct kvm_io_device *this,
+ gpa_t addr, int len, const void *val)
+{
+ struct vgic_io_device *iodev = container_of(this,
+ struct vgic_io_device, dev);
+ u32 intid = (addr - iodev->base_addr) * 8;
+ int i;
+
+ if (iodev->redist_vcpu)
+ vcpu = iodev->redist_vcpu;
+
+ for_each_set_bit(i, val, len * 8) {
+ struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+ spin_lock(&irq->irq_lock);
+ irq->enabled = true;
+ vgic_queue_irq(vcpu->kvm, irq);
+ }
+
+ return 0;
+}
+
+static int vgic_mmio_write_cenable(struct kvm_vcpu *vcpu,
+ struct kvm_io_device *this,
+ gpa_t addr, int len, const void *val)
+{
+ struct vgic_io_device *iodev = container_of(this,
+ struct vgic_io_device, dev);
+ u32 intid = (addr - iodev->base_addr) * 8;
+ int i;
+
+ if (iodev->redist_vcpu)
+ vcpu = iodev->redist_vcpu;
+
+ for_each_set_bit(i, val, len * 8) {
+ struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+ spin_lock(&irq->irq_lock);
+
+ irq->enabled = false;
+ /* TODO: Does the exit/entry code take care of "unqueuing"? */
+
+ spin_unlock(&irq->irq_lock);
+ }
+ return 0;
+}
+
struct vgic_register_region vgic_v2_dist_registers[] = {
REGISTER_DESC_WITH_LENGTH(GIC_DIST_CTRL,
vgic_mmio_read_v2_misc, vgic_mmio_write_v2_misc, 12),
REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_IGROUP,
vgic_mmio_read_raz, vgic_mmio_write_wi, 1),
REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_ENABLE_SET,
- vgic_mmio_read_nyi, vgic_mmio_write_nyi, 1),
+ vgic_mmio_read_enable, vgic_mmio_write_senable, 1),
REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_ENABLE_CLEAR,
- vgic_mmio_read_nyi, vgic_mmio_write_nyi, 1),
+ vgic_mmio_read_enable, vgic_mmio_write_cenable, 1),
REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_PENDING_SET,
vgic_mmio_read_nyi, vgic_mmio_write_nyi, 1),
REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_PENDING_CLEAR,
--
2.7.3
More information about the linux-arm-kernel
mailing list