Question about PCI I/O space in ARM64

[Kefeng Wang]

On 2016/3/23 20:26, Arnd Bergmann wrote:
> On Wednesday 23 March 2016 10:18:40 Catalin Marinas wrote:
>> On Wed, Mar 23, 2016 at 11:12:41AM +0800, Kefeng Wang wrote:
>>> If no pci, the PCI I/O space(16M) is mapped into an irrelevant mem space(right ?),
>>
>> No. It is not mapped at all.
>>
>>> not a right IO space,
>>> that is, no one call pci_remap_iospace() to remap the memory mapped I/O space, once driver
>>> like f71805f loaded, write value to IO space(see f71805f_init->f71805f_find->superio_enter->outb),
>>> we met following oops,
>>> ------------------------
>>> Unable to handle kernel paging request at virtual address ffffffbffee0002e
>>> pgd = ffffffc1d68d4000
>>> [ffffffbffee0002e] *pgd=0000000000000000, *pud=0000000000000000
>>> Internal error: Oops: 94000046 [#1] PREEMPT SMP
>>> Modules linked in: f71805f(+) hwmon
>>> CPU: 3 PID: 1659 Comm: insmod Not tainted 4.5.0+ #88
>>> Hardware name: linux,dummy-virt (DT)
>>> task: ffffffc1f6665400 ti: ffffffc1d6418000 task.ti: ffffffc1d6418000
>>> PC is at f71805f_find+0x6c/0x358 [f71805f]
>>> ------------------------
>>
>> That's caused by not having a mapped PCI I/O space.

Clear.

>>
>>> I am not clear about PCI I/O, but if this is indeed a bug, how to solve this issue,
>>> any advice will be appreciated.
>>
>> You need a PCI host controller driver (e.g.
>> drivers/pci/host/pci-host-generic.c) and corresponding bindings in DT or
>> ACPI.

In our inner test, there are some board without pcie host driver(even without
pci host controller).

> 
> I think getting an Oops is not the best behavior though, it would be
> nice if that could be improved in some way.
> 
> Ideally, each driver that accesses PCI I/O space would call request_region()
> before doing so, and it would be good if that call could be made to
> return an error when asked about an address that has not been mapped.
> 
> I see that ioport_resource gets initialized to the {0, IO_SPACE_LIMIT}
> range. If we could change it so that pci_remap_iospace() hooks up
> to ioport_resource and extends it whenever something gets mapped
> there up to IO_SPACE_LIMIT, we can change the default range to
> {0,0}, which would fail for any request_region call before the
> first pci_remap_iospace.
> 
> This won't help for the specific f71805f driver example, because that
> does not call request_region(), but we can treat that as a driver bug
> and fix it.

Yes, we met same error with several modules(at least 8+), so it's better to find
a good way to avoid it, change modules one by one maybe not a good choice.

Define some arch in/out func instead of generic ops? when in/out vals, check
whether or not the pci_iobase is mapped.

Thanks catalin and arnd for your reply.
> 
> 	Arnd
> 
> .
>