[PATCH 16/17] qcom: ipq4019: add crypto nodes to ipq4019 SoC and DK01 device tree

[Matthew McClintock]

This adds the crypto nodes to the ipq4019 device tree, it also adds the
BAM node used by crypto as well which the driver currently requires to
operate properly

The crypto driver itself depends on some other patches to qcom_bam_dma
to function properly:

https://lkml.org/lkml/2015/12/1/113

CC: Stanimir Varbanov <svarbanov at mm-sol.com>
Signed-off-by: Matthew McClintock <mmcclint at codeaurora.org>
---
 arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi |  8 ++++++++
 arch/arm/boot/dts/qcom-ipq4019.dtsi           | 25 +++++++++++++++++++++++++
 2 files changed, 33 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
index 21032a8..2c347ad 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -93,6 +93,14 @@
 			status = "ok";
 		};
 
+		cryptobam: dma at 8e04000 {
+			status = "ok";
+		};
+
+		crypto at 8e3a000 {
+			status = "ok";
+		};
+
 		watchdog at b017000 {
 			status = "ok";
 		};
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index db48fd3..3cd42c0 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -147,6 +147,31 @@
 			status = "disabled";
 		};
 
+
+		cryptobam: dma at 8e04000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x08e04000 0x20000>;
+			interrupts = <GIC_SPI 207 0>;
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <1>;
+			qcom,controlled-remotely;
+			status = "disabled";
+		};
+
+		crypto at 8e3a000 {
+			compatible = "qcom,crypto-v5.1";
+			reg = <0x08e3a000 0x6000>;
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_CLK>;
+			clock-names = "iface", "bus", "core";
+			dmas = <&cryptobam 2>, <&cryptobam 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
                 acc0: clock-controller at b088000 {
                         compatible = "qcom,kpss-acc-v1";
                         reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project