[PATCH v3 6/9] irqchip/gic-v3: Parse and export virtual GIC information
Graeme Gregory
gg at slimlogic.co.uk
Tue Mar 22 04:27:28 PDT 2016
On Tue, Mar 08, 2016 at 11:29:30AM +0000, Julien Grall wrote:
> Fill up the recently introduced gic_kvm_info with the virtual GIC
> information.
>
> Signed-off-by: Julien Grall <julien.grall at arm.com>
> Cc: Thomas Gleixner <tglx at linutronix.de>
> Cc: Jason Cooper <jason at lakedaemon.net>
> Cc: Marc Zyngier <marc.zyngier at arm.com>
>
> ---
> Changes in v3:
> - Add ACPI support
>
> Changes in v2:
> - Use 0 rather than a negative value to know when the maintenance IRQ
> is not present.
> - Use resource for vcpu and vctrl
> ---
> drivers/irqchip/irq-gic-v3.c | 85 +++++++++++++++++++++++++++++++++-
> include/linux/irqchip/arm-gic-common.h | 1 +
> 2 files changed, 85 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
> index 50e87e6..6ae25120 100644
> --- a/drivers/irqchip/irq-gic-v3.c
> +++ b/drivers/irqchip/irq-gic-v3.c
> @@ -28,6 +28,7 @@
> #include <linux/slab.h>
>
> #include <linux/irqchip.h>
> +#include <linux/irqchip/arm-gic-common.h>
> #include <linux/irqchip/arm-gic-v3.h>
>
> #include <asm/cputype.h>
> @@ -56,6 +57,8 @@ struct gic_chip_data {
> static struct gic_chip_data gic_data __read_mostly;
> static struct static_key supports_deactivate = STATIC_KEY_INIT_TRUE;
>
> +static struct gic_kvm_info gic_v3_kvm_info;
> +
> #define gic_data_rdist() (this_cpu_ptr(gic_data.rdists.rdist))
> #define gic_data_rdist_rd_base() (gic_data_rdist()->rd_base)
> #define gic_data_rdist_sgi_base() (gic_data_rdist_rd_base() + SZ_64K)
> @@ -901,6 +904,37 @@ static int __init gic_validate_dist_version(void __iomem *dist_base)
> return 0;
> }
>
> +static void __init gic_of_setup_kvm_info(struct device_node *node)
> +{
> + int ret;
> + struct resource r;
> + u32 gicv_idx;
> +
> + gic_v3_kvm_info.type = GIC_V3;
> +
> + gic_v3_kvm_info.maint_irq = irq_of_parse_and_map(node, 0);
> +
> + if (of_property_read_u32(node, "#redistributor-regions",
> + &gicv_idx))
> + gicv_idx = 1;
> +
> + gicv_idx += 3; /* Also skip GICD, GICC, GICH */
> + ret = of_address_to_resource(node, gicv_idx, &r);
> + if (!ret) {
> + if (!PAGE_ALIGNED(r.start))
> + pr_warn("GICV physical address 0x%llx not page aligned\n",
> + (unsigned long long)r.start);
> + else if (!PAGE_ALIGNED(resource_size(&r)))
> + pr_warn("GICV size 0x%llx not a multiple of page size 0x%lx\n",
> + (unsigned long long)resource_size(&r),
> + PAGE_SIZE);
> + else
> + gic_v3_kvm_info.vcpu = r;
> + }
> +
> + gic_set_kvm_info(&gic_v3_kvm_info);
> +}
> +
> static int __init gic_of_init(struct device_node *node, struct device_node *parent)
> {
> void __iomem *dist_base;
> @@ -952,8 +986,10 @@ static int __init gic_of_init(struct device_node *node, struct device_node *pare
>
> err = gic_init_bases(dist_base, rdist_regs, nr_redist_regions,
> redist_stride, &node->fwnode);
> - if (!err)
> + if (!err) {
> + gic_of_setup_kvm_info(node);
> return 0;
> + }
>
> out_unmap_rdist:
> for (i = 0; i < nr_redist_regions; i++)
> @@ -974,6 +1010,10 @@ static struct
> struct redist_region *redist_regs;
> u32 nr_redist_regions;
> bool single_redist;
> + u32 maint_irq;
> + int maint_irq_mode;
> + phys_addr_t vctrl_base;
> + phys_addr_t vcpu_base;
> } acpi_data __initdata;
>
> static void __init
> @@ -1020,6 +1060,13 @@ gic_acpi_parse_madt_gicc(struct acpi_subtable_header *header,
> return -ENOMEM;
>
> gic_acpi_register_redist(gicc->gicr_base_address, redist_base);
> +
> + acpi_data.maint_irq = gicc->vgic_interrupt;
> + acpi_data.maint_irq_mode = (gicc->flags & ACPI_MADT_VGIC_IRQ_MODE) ?
> + ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE;
> + acpi_data.vctrl_base = gicc->gich_base_address;
> + acpi_data.vcpu_base = gicc->gicv_base_address;
> +
> return 0;
> }
Placing this here means that it will not collect the info in the case
where there is a Generic Interrupt Redistributor structure in the MADT.
I guess collecting this info should not be a side effect of happening to
pass GICC for redistributor base. Which unfortuneately probably means we
do need to parse the GICCs specifically for this information.
Graeme
>
> @@ -1111,6 +1158,40 @@ static bool __init acpi_validate_gic_table(struct acpi_subtable_header *header,
> }
>
> #define ACPI_GICV3_DIST_MEM_SIZE (SZ_64K)
> +#define ACPI_GICV2_VCTRL_MEM_SIZE (SZ_4K)
> +#define ACPI_GICV2_VCPU_MEM_SIZE (SZ_8K)
> +
> +static void __init gic_acpi_setup_kvm_info(void)
> +{
> + int irq;
> +
> + gic_v3_kvm_info.type = GIC_V3;
> +
> + irq = acpi_register_gsi(NULL, acpi_data.maint_irq,
> + acpi_data.maint_irq_mode,
> + ACPI_ACTIVE_HIGH);
> + if (irq > 0)
> + gic_v3_kvm_info.maint_irq = irq;
> +
> + if (acpi_data.vctrl_base) {
> + struct resource *vctrl = &gic_v3_kvm_info.vctrl;
> +
> + vctrl->flags = IORESOURCE_MEM;
> + vctrl->start = acpi_data.vctrl_base;
> + vctrl->end = vctrl->start + ACPI_GICV2_VCTRL_MEM_SIZE - 1;
> + }
> +
> + if (acpi_data.vcpu_base) {
> + struct resource *vcpu = &gic_v3_kvm_info.vcpu;
> +
> + vcpu->flags = IORESOURCE_MEM;
> + vcpu->start = acpi_data.vcpu_base;
> + vcpu->end = vcpu->start + ACPI_GICV2_VCPU_MEM_SIZE - 1;
> + }
> +
> + gic_set_kvm_info(&gic_v3_kvm_info);
> +}
> +
>
> static int __init
> gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end)
> @@ -1159,6 +1240,8 @@ gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end)
> goto out_fwhandle_free;
>
> acpi_set_irq_model(ACPI_IRQ_MODEL_GIC, domain_handle);
> + gic_acpi_setup_kvm_info();
> +
> return 0;
>
> out_fwhandle_free:
> diff --git a/include/linux/irqchip/arm-gic-common.h b/include/linux/irqchip/arm-gic-common.h
> index f7723b9..15d68c6 100644
> --- a/include/linux/irqchip/arm-gic-common.h
> +++ b/include/linux/irqchip/arm-gic-common.h
> @@ -15,6 +15,7 @@
>
> enum gic_type {
> GIC_V2,
> + GIC_V3,
> };
>
> struct gic_kvm_info {
> --
> 1.9.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
More information about the linux-arm-kernel
mailing list