[PATCH 2/2] ARM: socfpga: dts: Drop gmac0 from CV dtsi

[Dinh Nguyen]

On 03/19/2016 06:57 PM, Marek Vasut wrote:
> The socfpga_cyclone5.dtsi is included by all DTS files which describe boards
> using the Cyclone V SoC. The Cyclone V SoC has two ethernet controllers and
> different boards use none, one or both of them.
> 
> The /soc/ethernet at ff702000/{} node in socfpga_cyclone5.dtsi unconditionaly
> enabled gmac0 interface, which is clearly wrong for those boards which use
> gmac1 interface instead.
> 
> This patch removes the entire /soc/ethernet at ff702000/{} node from the
> socfpga_cyclone5.dtsi file. This is correct, since all of the board which
> include this file also have correct gmac0 or gmac1 node present in them.
> Minor correction had to be done to EBV SoCrates, which didn't define PHY
> mode explicitly, but inherited it from the socfpga_cyclone5.dtsi .
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Dinh Nguyen <dinguyen at opensource.altera.com>
> ---
>  arch/arm/boot/dts/socfpga_cyclone5.dtsi         | 5 -----
>  arch/arm/boot/dts/socfpga_cyclone5_socrates.dts | 1 +
>  2 files changed, 1 insertion(+), 5 deletions(-)
> 

Both patches applied!

Thanks,
Dinh