[PATCH 2/2] ARM: socfpga: Add support for HPS KEYs/SWs on SoCKit

[Marek Vasut]

Add support for the keys and flip-switches on the SoCFPGA SoCkit board.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Dinh Nguyen <dinguyen at opensource.altera.com>
---
 arch/arm/boot/dts/socfpga_cyclone5_sockit.dts | 62 ++++++++++++++++++++++++++-
 1 file changed, 61 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index 1461690..02e22f5 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -67,6 +67,62 @@
 		};
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		hps_sw0 {
+			label = "hps_sw0";
+			gpios = <&portc 20 0>;	/* HPS_GPI7 */
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0x0>;	/* SW_LID */
+		};
+
+		hps_sw1 {
+			label = "hps_sw1";
+			gpios = <&portc 19 0>;	/* HPS_GPI6 */
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0x5>;	/* SW_DOCK */
+		};
+
+		hps_sw2 {
+			label = "hps_sw2";
+			gpios = <&portc 18 0>;	/* HPS_GPI5 */
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0xa>;	/* SW_KEYPAD_SLIDE */
+		};
+
+		hps_sw3 {
+			label = "hps_sw3";
+			gpios = <&portc 17 0>;	/* HPS_GPI4 */
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0xc>;	/* SW_ROTATE_LOCK */
+		};
+
+		hps_hkey0 {
+			label = "hps_hkey0";
+			gpios = <&portc 21 1>;	/* HPS_GPI8 */
+			linux,code = <187>;	/* KEY_F17 */
+		};
+
+		hps_hkey1 {
+			label = "hps_hkey1";
+			gpios = <&portc 22 1>;	/* HPS_GPI9 */
+			linux,code = <188>;	/* KEY_F18 */
+		};
+
+		hps_hkey2 {
+			label = "hps_hkey2";
+			gpios = <&portc 23 1>;	/* HPS_GPI10 */
+			linux,code = <189>;	/* KEY_F19 */
+		};
+
+		hps_hkey3 {
+			label = "hps_hkey3";
+			gpios = <&portc 24 1>;	/* HPS_GPI11 */
+			linux,code = <190>;	/* KEY_F20 */
+		};
+	};
+
 	regulator_3_3v: vcc3p3-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC3P3";
@@ -89,11 +145,15 @@
 	rxc-skew-ps = <2000>;
 };
 
+&gpio0 {	/* GPIO 0..29 */
+	status = "okay";
+};
+
 &gpio1 {	/* GPIO 30..57 */
 	status = "okay";
 };
 
-&gpio2 {
+&gpio2 {	/* GPIO 58..66 (HLGPI 0..13 at offset 13) */
 	status = "okay";
 };
 
-- 
2.7.0