[PATCH] ARM: dts: rockchip: Add mdio node to ethernet node

[Andreas Färber]

Am 18.03.2016 um 12:20 schrieb Tomeu Vizoso:
> So the dwmac device manages to probe again.
> 
> Signed-off-by: Tomeu Vizoso <tomeu.vizoso at collabora.com>
> Fixes: 88f8b1bb41c6 ("stmmac: Fix 'eth0: No PHY found' regression")
> ---
>  arch/arm/boot/dts/rk3288-rock2-som.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
> index 1ece66f3e162..4ba7ddecb478 100644
> --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi
> +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
> @@ -101,6 +101,14 @@
>  	snps,reset-delays-us = <0 10000 30000>;
>  	rx_delay = <0x10>;
>  	tx_delay = <0x30>;
> +	mdio0 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "snps,dwmac-mdio";
> +		ethphy1: ethernet-phy at 1 {
> +			reg = <1>;
> +		};
> +	};

This is a) ugly for lack of white lines in between, b) unnecessary since
this is being fixed in the stmmac driver where it will benefit more than
just this one SoM.

Regards,
Andreas

>  };
>  
>  &i2c0 {

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton; HRB 21284 (AG Nürnberg)