[RESEND PATCH v4 4/5] clocksource: a little improvment for printk in arm_arch_timer.c
fu.wei at linaro.org
fu.wei at linaro.org
Fri Mar 18 01:00:52 PDT 2016
From: Fu Wei <fu.wei at linaro.org>
This patch defines pr_fmt(fmt) for all pr_* functions.
Signed-off-by: Fu Wei <fu.wei at linaro.org>
---
drivers/clocksource/arm_arch_timer.c | 28 +++++++++++++++-------------
1 file changed, 15 insertions(+), 13 deletions(-)
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index d0b01fb5..db466d5 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -29,6 +29,9 @@
#include <clocksource/arm_arch_timer.h>
+#undef pr_fmt
+#define pr_fmt(fmt) "arch_timer: " fmt
+
#define CNTTIDR 0x08
#define CNTTIDR_VIRT(n) (BIT(1) << ((n) * 4))
@@ -388,12 +391,12 @@ arch_timer_detect_rate(void __iomem *cntbase, struct device_node *np)
/* Check the timer frequency. */
if (arch_timer_rate == 0)
- pr_warn("Architected timer frequency not available\n");
+ pr_warn("frequency not available\n");
}
static void arch_timer_banner(unsigned type)
{
- pr_info("Architected %s%s%s timer(s) running at %lu.%02luMHz (%s%s%s).\n",
+ pr_info("%s%s%s timer(s) running at %lu.%02luMHz (%s%s%s).\n",
type & ARCH_CP15_TIMER ? "cp15" : "",
type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ? " and " : "",
type & ARCH_MEM_TIMER ? "mmio" : "",
@@ -497,7 +500,7 @@ static void __init arch_counter_register(unsigned type)
static void arch_timer_stop(struct clock_event_device *clk)
{
- pr_debug("arch_timer_teardown disable IRQ%d cpu #%d\n",
+ pr_debug("teardown, disable IRQ%d cpu #%d\n",
clk->irq, smp_processor_id());
disable_percpu_irq(arch_timer_ppi[arch_timer_uses_ppi]);
@@ -596,8 +599,7 @@ static int __init arch_timer_register(void)
}
if (err) {
- pr_err("arch_timer: can't register interrupt %d (%d)\n",
- ppi, err);
+ pr_err("can't register interrupt %d (%d)\n", ppi, err);
goto out_free;
}
@@ -649,7 +651,7 @@ static int __init arch_timer_mem_register(void __iomem *base, unsigned int irq)
ret = request_irq(irq, func, IRQF_TIMER, "arch_mem_timer", &t->evt);
if (ret) {
- pr_err("arch_timer: Failed to request mem timer irq\n");
+ pr_err("Failed to request mem timer irq\n");
kfree(t);
}
@@ -726,7 +728,7 @@ static void __init arch_timer_init(void)
}
if (!has_ppi) {
- pr_warn("arch_timer: No interrupt available, giving up\n");
+ pr_warn("No interrupt available, giving up\n");
return;
}
}
@@ -740,7 +742,7 @@ static void __init arch_timer_of_init(struct device_node *np)
int i;
if (arch_timers_present & ARCH_CP15_TIMER) {
- pr_warn("arch_timer: multiple nodes in dt, skipping\n");
+ pr_warn("multiple nodes in dt, skipping\n");
return;
}
@@ -775,7 +777,7 @@ static void __init arch_timer_mem_init(struct device_node *np)
arch_timers_present |= ARCH_MEM_TIMER;
cntctlbase = of_iomap(np, 0);
if (!cntctlbase) {
- pr_err("arch_timer: Can't find CNTCTLBase\n");
+ pr_err("Can't find CNTCTLBase\n");
return;
}
@@ -790,7 +792,7 @@ static void __init arch_timer_mem_init(struct device_node *np)
u32 cntacr;
if (of_property_read_u32(frame, "frame-number", &n)) {
- pr_err("arch_timer: Missing frame-number\n");
+ pr_err("Missing frame-number\n");
of_node_put(frame);
goto out;
}
@@ -818,7 +820,7 @@ static void __init arch_timer_mem_init(struct device_node *np)
base = arch_counter_base = of_iomap(best_frame, 0);
if (!base) {
- pr_err("arch_timer: Can't map frame's registers\n");
+ pr_err("Can't map frame's registers\n");
goto out;
}
@@ -828,7 +830,7 @@ static void __init arch_timer_mem_init(struct device_node *np)
irq = irq_of_parse_and_map(best_frame, PHYS_SPI);
if (!irq) {
- pr_err("arch_timer: Frame missing %s irq",
+ pr_err("Frame missing %s irq",
arch_timer_mem_use_virtual ? "virt" : "phys");
goto out;
}
@@ -850,7 +852,7 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table)
struct arch_timer_data data;
if (arch_timers_present & ARCH_CP15_TIMER) {
- pr_warn("arch_timer: already initialized, skipping\n");
+ pr_warn("already initialized, skipping\n");
return -EINVAL;
}
--
2.5.0
More information about the linux-arm-kernel
mailing list